1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194 | smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-59-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ES.2
Device Model: ST31000340NS
Serial Number: 9QJ0FGH4
LU WWN Device Id: 5 000c50 00988dda2
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Fri Jan 30 12:54:12 2015 MST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 228) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 083 053 006 Pre-fail Always - 222685962
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 92
5 Reallocated_Sector_Ct 0x0033 028 028 036 Pre-fail Always FAILING_NOW 1483
7 Seek_Error_Rate 0x000f 079 072 030 Pre-fail Always - 84178230
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 39526
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 51
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 903
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 8590065667
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 049 045 Old_age Always - 30 (Min/Max 27/30)
194 Temperature_Celsius 0x0022 030 051 000 Old_age Always - 30 (0 20 0 0)
195 Hardware_ECC_Recovered 0x001a 052 021 000 Old_age Always - 222685962
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 6 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 occurred at disk power-on lifetime: 36067 hours (1502 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 43d+07:54:29.596 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 43d+07:54:29.596 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 43d+07:54:29.595 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 43d+07:54:29.595 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 43d+07:54:29.595 READ FPDMA QUEUED
Error 5 occurred at disk power-on lifetime: 36067 hours (1502 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 f8 ff ff ff 4f 00 43d+07:54:25.013 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 43d+07:54:25.002 READ FPDMA QUEUED
60 00 f8 ff ff ff 4f 00 43d+07:54:24.986 READ FPDMA QUEUED
60 00 f8 ff ff ff 4f 00 43d+07:54:24.967 READ FPDMA QUEUED
60 00 f8 ff ff ff 4f 00 43d+07:54:24.881 READ FPDMA QUEUED
Error 4 occurred at disk power-on lifetime: 7614 hours (317 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 51 00 00 00 00 00 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 02 ff ff ff 0f 00 00:06:34.285 READ LOG EXT
3f 00 01 ff ff ff 0f 00 00:06:34.283 WRITE LOG EXT
ef 03 45 00 00 00 00 00 00:06:34.233 SET FEATURES [Set transfer mode]
00 00 00 00 00 00 00 04 00:06:34.183 NOP [Abort queued commands]
2f 00 01 ff ff ff 0f 00 00:06:33.922 READ LOG EXT
Error 3 occurred at disk power-on lifetime: 7614 hours (317 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 51 00 00 00 00 00 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 01 ff ff ff 0f 00 00:06:33.922 READ LOG EXT
3f 00 01 ff ff ff 0f 00 00:06:33.921 WRITE LOG EXT
92 03 01 00 00 00 a0 00 00:02:56.233 DOWNLOAD MICROCODE [Reserved subcommand]
ec 00 01 00 00 00 00 00 00:02:56.230 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:02:56.180 SET FEATURES [Set transfer mode]
Error 2 occurred at disk power-on lifetime: 7614 hours (317 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
08 51 00 00 00 00 00 Error:
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
2f 00 02 ff ff ff 0f 00 00:02:55.870 READ LOG EXT
3f 00 01 ff ff ff 0f 00 00:02:55.860 WRITE LOG EXT
ef 03 45 00 00 00 00 00 00:02:55.810 SET FEATURES [Set transfer mode]
00 00 00 00 00 00 00 04 00:02:55.755 NOP [Abort queued commands]
2f 00 01 ff ff ff 0f 00 00:02:55.494 READ LOG EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: unknown failure 90% 39308 0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|