1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141 | juser@cnt3:~/temp$ hdmi2usb-mode-switch -v --by-type atlys --flash-image image-gateware+bios+firmware.v0.0.4-122-gbc7feb5.atlys.hdmi2usb.lm32.bin
WARNING:root:unbind-helper not found, will have to run as root!
Found exart-uarts at [LsusbDevice(04e2:1410:0001 /dev/bus/usb/002/009)] associating with Atlys at [Board(dev=LsusbDevice(1443:0007:0000 /dev/bus/usb/002/010), type='atlys', state='unconfigured')]
Digilent Atlys in 'unconfigured' mode at /dev/bus/usb/002/010
/sys/bus/usb/devices/2-1.3.2
/sys/bus/usb/devices/2-1.3.2:1.0
Serial port at /dev/ttyXRUSB0
Numato Opsis in 'operational' mode at /dev/bus/usb/002/126
/sys/bus/usb/devices/2-1.2
/sys/bus/usb/devices/2-1.2:1.0
/sys/bus/usb/devices/2-1.2:1.1
/sys/bus/usb/devices/2-1.2:1.2
/sys/bus/usb/devices/2-1.2:1.3
Board is currently used by drivers ('cdc_acm', 'uvcvideo')
Serial port at /dev/ttyACM0
Ignore as not type atlys
args.all None
My root dir: /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.post1-py3.5.egg/hdmi2usb/modeswitch
Going from unconfigured to jtag
Using FX2 firmware /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.post1-py3.5.egg/hdmi2usb/firmware/fx2/atlys/ixo-usb-jtag.hex
Running 'fxload -t fx2lp -D /dev/bus/usb/002/010 -I /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.post1-py3.5.egg/hdmi2usb/firmware/fx2/atlys/ixo-usb-jtag.hex -v'
Found exart-uarts at [LsusbDevice(04e2:1410:0001 /dev/bus/usb/002/009)] associating with Atlys at [Board(dev=LsusbDevice(1443:0007:0000 /dev/bus/usb/002/010), type='atlys', state='unconfigured')]
Digilent Atlys in 'unconfigured' mode at /dev/bus/usb/002/010
/sys/bus/usb/devices/2-1.3.2
/sys/bus/usb/devices/2-1.3.2:1.0
Serial port at /dev/ttyXRUSB0
Numato Opsis in 'operational' mode at /dev/bus/usb/002/126
/sys/bus/usb/devices/2-1.2
/sys/bus/usb/devices/2-1.2:1.0
/sys/bus/usb/devices/2-1.2:1.1
/sys/bus/usb/devices/2-1.2:1.2
/sys/bus/usb/devices/2-1.2:1.3
Board is currently used by drivers ('cdc_acm', 'uvcvideo')
Serial port at /dev/ttyACM0
Ignore as not type atlys
Found exart-uarts at [LsusbDevice(04e2:1410:0001 /dev/bus/usb/002/009)] associating with Atlys at [Board(dev=LsusbDevice(16c0:06ad:0004 'hw_nexys'), type='atlys', state='jtag')]
Digilent Atlys in 'jtag' mode at /dev/bus/usb/002/011
/sys/bus/usb/devices/2-1.3.2
/sys/bus/usb/devices/2-1.3.2:1.0
Serial port at /dev/ttyXRUSB0
Numato Opsis in 'operational' mode at /dev/bus/usb/002/126
/sys/bus/usb/devices/2-1.2
/sys/bus/usb/devices/2-1.2:1.0
/sys/bus/usb/devices/2-1.2:1.1
/sys/bus/usb/devices/2-1.2:1.2
/sys/bus/usb/devices/2-1.2:1.3
Board is currently used by drivers ('cdc_acm', 'uvcvideo')
Serial port at /dev/ttyACM0
Ignore as not type atlys
Board was Board(dev=LsusbDevice(1443:0007:0000 /dev/bus/usb/002/010), type='atlys', state='unconfigured')
Board now Board(dev=LsusbDevice(16c0:06ad:0004 'hw_nexys'), type='atlys', state='jtag')
Found exart-uarts at [LsusbDevice(04e2:1410:0001 /dev/bus/usb/002/009)] associating with Atlys at [Board(dev=LsusbDevice(16c0:06ad:0004 'hw_nexys'), type='atlys', state='jtag')]
Digilent Atlys in 'jtag' mode at /dev/bus/usb/002/011
/sys/bus/usb/devices/2-1.3.2
/sys/bus/usb/devices/2-1.3.2:1.0
Serial port at /dev/ttyXRUSB0
Numato Opsis in 'operational' mode at /dev/bus/usb/002/126
/sys/bus/usb/devices/2-1.2
/sys/bus/usb/devices/2-1.2:1.0
/sys/bus/usb/devices/2-1.2:1.1
/sys/bus/usb/devices/2-1.2:1.2
/sys/bus/usb/devices/2-1.2:1.3
Board is currently used by drivers ('cdc_acm', 'uvcvideo')
Serial port at /dev/ttyACM0
Ignore as not type atlys
Running ['openocd', '-f', 'board/digilent_atlys.cfg', '-c', 'init; xc6s_print_dna xc6s.tap; jtagspi_init 0 /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.post1-py3.5.egg/hdmi2usb/firmware/spartan6/atlys/bscan_spi_xc6slx45.bit; jtagspi_program /home/juser/temp/image-gateware+bios+firmware.v0.0.4-122-gbc7feb5.atlys.hdmi2usb.lm32.bin 0x0; exit']
Open On-Chip Debugger 0.9.0+git20151228 (2016-01-26-04:52)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Warn : Adapter driver 'usb_blaster' did not declare which transports it allows; assuming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
Warn : incomplete ublast_vid_pid configuration
jtagspi_program
Info : usb blaster interface using libftdi
Info : This adapter doesn't support configurable speed
Info : JTAG tap: xc6s.tap tap/device found: 0x34008093 (mfg: 0x049 (Xilinx), part: 0x4008, ver: 0x3)
DNA = 100110111001100010111100010110100011001101110101000001001 (0x1373178b466ea09)
loaded file /usr/local/lib/python3.5/dist-packages/hdmi2usb.modeswitch-0.post1-py3.5.egg/hdmi2usb/firmware/spartan6/atlys/bscan_spi_xc6slx45.bit to pld device 0 in 4s 458358us
Info : JTAG tap: xc6s.tap tap/device found: 0x34008093 (mfg: 0x049 (Xilinx), part: 0x4008, ver: 0x3)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
flash 'jtagspi' found at 0x00000000
auto erase enabled
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
Info : sector 0 took 495 ms
Info : sector 1 took 502 ms
Info : sector 2 took 510 ms
Info : sector 3 took 520 ms
Info : sector 4 took 520 ms
Info : sector 5 took 522 ms
Info : sector 6 took 532 ms
Info : sector 7 took 522 ms
Info : sector 8 took 634 ms
Info : sector 9 took 626 ms
Info : sector 10 took 632 ms
Info : sector 11 took 618 ms
Info : sector 12 took 636 ms
Info : sector 13 took 614 ms
Info : sector 14 took 612 ms
Info : sector 15 took 615 ms
Info : sector 16 took 598 ms
Info : sector 17 took 588 ms
Info : sector 18 took 581 ms
Info : sector 19 took 588 ms
Info : sector 20 took 628 ms
Info : sector 21 took 592 ms
Info : sector 22 took 609 ms
Info : sector 23 took 582 ms
Info : sector 24 took 578 ms
Info : sector 25 took 578 ms
Info : sector 26 took 586 ms
Info : sector 27 took 578 ms
Info : sector 28 took 578 ms
Info : sector 29 took 582 ms
Info : sector 30 took 578 ms
Info : sector 31 took 582 ms
Info : sector 32 took 629 ms
Info : sector 33 took 640 ms
wrote 2228224 bytes from file /home/juser/temp/image-gateware+bios+firmware.v0.0.4-122-gbc7feb5.atlys.hdmi2usb.lm32.bin in 76.312691s (28.514 KiB/s)
Info : Found flash device 'micron n25q128' (ID 0x0018ba20)
read 2203260 bytes from file /home/juser/temp/image-gateware+bios+firmware.v0.0.4-122-gbc7feb5.atlys.hdmi2usb.lm32.bin and flash bank 0 at offset 0x00000000 in 44.155201s (48.729 KiB/s)
contents match
After flashing, the board will need to be power cycled.
Found exart-uarts at [LsusbDevice(04e2:1410:0001 /dev/bus/usb/002/009)] associating with Atlys at [Board(dev=LsusbDevice(16c0:06ad:0004 'hw_nexys'), type='atlys', state='jtag')]
Digilent Atlys in 'jtag' mode at /dev/bus/usb/002/011
/sys/bus/usb/devices/2-1.3.2
/sys/bus/usb/devices/2-1.3.2:1.0
Serial port at /dev/ttyXRUSB0
Numato Opsis in 'operational' mode at /dev/bus/usb/002/126
/sys/bus/usb/devices/2-1.2
/sys/bus/usb/devices/2-1.2:1.0
/sys/bus/usb/devices/2-1.2:1.1
/sys/bus/usb/devices/2-1.2:1.2
/sys/bus/usb/devices/2-1.2:1.3
Board is currently used by drivers ('cdc_acm', 'uvcvideo')
Serial port at /dev/ttyACM0
Ignore as not type atlys
Found 1 boards.
|