1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1CH166
Serial Number: W1F32225
LU WWN Device Id: 5 000c50 06142c645
Firmware Version: CC24
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Mon Jul 31 20:01:59 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Read SMART Data failed: scsi error badly formed scsi parameters
=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.
SMART Error Log Version: 1
ATA Error Count: 198 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 198 occurred at disk power-on lifetime: 15791 hours (657 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 11:49:05.887 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:49:05.885 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:49:05.026 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:49:04.759 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:49:03.957 READ FPDMA QUEUED
Error 197 occurred at disk power-on lifetime: 15791 hours (657 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 11:48:31.475 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:48:31.474 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:48:31.473 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:48:31.473 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:48:31.472 READ FPDMA QUEUED
Error 196 occurred at disk power-on lifetime: 15791 hours (657 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 11:47:17.145 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:47:16.142 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:47:15.871 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:47:15.869 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:47:15.868 READ FPDMA QUEUED
Error 195 occurred at disk power-on lifetime: 15791 hours (657 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 11:45:38.521 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:45:34.519 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:45:33.560 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:45:30.258 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 11:45:29.290 READ FPDMA QUEUED
Error 194 occurred at disk power-on lifetime: 15740 hours (655 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 28 ff ff ff 4f 00 03:13:08.242 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 03:13:08.242 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 03:13:08.242 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 03:13:08.242 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 03:13:08.242 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Selective Self-tests/Logging not supported
|