[    0.000000] Linux version 4.10.0-19-generic (buildd@lcy01-01) (gcc version 6.3.0 20170321 (Ubuntu 6.3.0-10ubuntu1) ) #21-Ubuntu SMP Thu Apr 6 17:03:14 UTC 2017 (Ubuntu 4.10.0-19.21-generic 4.10.8)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de0b4fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de0b5000-0x00000000de157fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de158000-0x00000000de167fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000de168000-0x00000000de284fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de285000-0x00000000de85cfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de85d000-0x00000000de85dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de85e000-0x00000000de8a0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de8a1000-0x00000000decc0fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000decc1000-0x00000000deff3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: System manufacturer System Product Name/P8H61-MX R2.0, BIOS 9012 10/29/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FF0000000 write-back
[    0.000000]   2 base 110000000 mask FF8000000 write-back
[    0.000000]   3 base 118000000 mask FFC000000 write-back
[    0.000000]   4 base 11C000000 mask FFE000000 write-back
[    0.000000]   5 base 11E000000 mask FFF000000 write-back
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 4080M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000fd720-0x000fd72f] mapped at [c00fd720]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1c3fffff]
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] BRK [0x1beff000, 0x1befffff] PGTABLE
[    0.000000] BRK [0x1bf00000, 0x1bf00fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7e4d3000-0x7fffffff]
[    0.000000] Allocated new RAMDISK: [mem 0x360d1000-0x37bfd8c3]
[    0.000000] Move RAMDISK from [mem 0x7e4d3000-0x7ffff8c3] to [mem 0x360d1000-0x37bfd8c3]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DE15C080 00007C (v01 cmscom zoostorm 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DE1655D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DE15C188 00944E (v02 ALASKA A M I    00000021 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DE283080 000040
[    0.000000] ACPI: APIC 0x00000000DE1656E8 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DE165750 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DE165798 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DE1657D8 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DE165810 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DE165B80 000968 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DE1664E8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: MSDM 0x00000000DE166F80 000055 (v01 cmscom zoostorm 00000001 MSFT 00000000)
[    0.000000] ACPI: SLIC 0x00000000DE166FD8 000176 (v01 cmscom zoostorm 00000000      00000000)
[    0.000000] ACPI: BGRT 0x00000000DE167150 000038 (v00 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 3700MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000011effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000de0b4fff]
[    0.000000]   node   0: [mem 0x00000000de85d000-0x00000000de85dfff]
[    0.000000]   node   0: [mem 0x00000000de8a1000-0x00000000decc0fff]
[    0.000000]   node   0: [mem 0x00000000deff4000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[    0.000000] On node 0 totalpages: 1037438
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 809188 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 21 pages/cpu @f38a4000 s54988 r0 d31028 u86016
[    0.000000] pcpu-alloc: s54988 r0 d31028 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1035208
[    0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash ---
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0011f000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4064548K/4149752K available (8419K kernel code, 864K rwdata, 3196K rodata, 1004K init, 916K bss, 85204K reserved, 0K cma-reserved, 3236752K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xdbc34000 - 0xdbd2f000   (1004 kB)
                     .data : 0xdb838f5f - 0xdbc32200   (4068 kB)
                     .text : 0xdb000000 - 0xdb838f5f   (8419 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f3080000 soft=f3082000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_ext
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3000.027 MHz processor
[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.05 BogoMIPS (lpj=12000108)
[    0.000023] pid_max: default: 32768 minimum: 301
[    0.000036] ACPI: Core revision 20160930
[    0.004619] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.004640] Security Framework initialized
[    0.004641] Yama: becoming mindful.
[    0.004653] AppArmor: AppArmor initialized
[    0.004681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004682] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.004876] CPU: Physical Processor ID: 0
[    0.004876] CPU: Processor Core ID: 0
[    0.004879] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.004880] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.004881] mce: CPU supports 7 MCE banks
[    0.004888] CPU0: Thermal monitoring enabled (TM1)
[    0.004894] process: using mwait in idle threads
[    0.004898] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.004899] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.005057] Freeing SMP alternatives memory: 32K
[    0.005977] ftrace: allocating 33232 entries in 65 pages
[    0.017399] smpboot: Max logical packages: 1
[    0.017402] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.017792] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.057479] TSC deadline timer enabled
[    0.057481] smpboot: CPU0: Intel(R) Pentium(R) CPU G860 @ 3.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.057520] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.057539] ... version:                3
[    0.057540] ... bit width:              48
[    0.057540] ... generic registers:      8
[    0.057540] ... value mask:             0000ffffffffffff
[    0.057541] ... max period:             00007fffffffffff
[    0.057541] ... fixed-purpose events:   3
[    0.057542] ... event mask:             00000007000000ff
[    0.058179] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.058194] smp: Bringing up secondary CPUs ...
[    0.058250] CPU 1 irqstacks, hard=f29a0000 soft=f29a2000
[    0.058251] x86: Booting SMP configuration:
[    0.058251] .... node  #0, CPUs:      #1
[    0.058465] Initializing CPU#1
[    0.060540] smp: Brought up 1 node, 2 CPUs
[    0.060542] smpboot: Total of 2 processors activated (12000.10 BogoMIPS)
[    0.061948] devtmpfs: initialized
[    0.062223] evm: security.selinux
[    0.062224] evm: security.SMACK64
[    0.062224] evm: security.SMACK64EXEC
[    0.062224] evm: security.SMACK64TRANSMUTE
[    0.062225] evm: security.SMACK64MMAP
[    0.062225] evm: security.ima
[    0.062225] evm: security.capability
[    0.062298] PM: Registering ACPI NVS region [mem 0xde168000-0xde284fff] (1167360 bytes)
[    0.062318] PM: Registering ACPI NVS region [mem 0xde85e000-0xde8a0fff] (274432 bytes)
[    0.062374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.062376] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.062401] pinctrl core: initialized pinctrl subsystem
[    0.062496] RTC time: 10:06:35, date: 06/12/17
[    0.062570] NET: Registered protocol family 16
[    0.062766] EISA bus registered
[    0.072529] cpuidle: using governor ladder
[    0.084532] cpuidle: using governor menu
[    0.084534] PCCT header not found.
[    0.084642] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.084642] ACPI: bus type PCI registered
[    0.084644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.084685] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.084687] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.084688] PCI: Using MMCONFIG for extended config space
[    0.084688] PCI: Using configuration type 1 for base access
[    0.084797] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.084803] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.096671] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.096831] ACPI: Added _OSI(Module Device)
[    0.096832] ACPI: Added _OSI(Processor Device)
[    0.096832] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.096833] ACPI: Added _OSI(Processor Aggregator Device)
[    0.096989] ACPI: Executed 1 blocks of module-level executable AML code
[    0.100055] ACPI: Dynamic OEM Table Load:
[    0.100061] ACPI: SSDT 0x00000000F29AE000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.100339] ACPI: Dynamic OEM Table Load:
[    0.100343] ACPI: SSDT 0x00000000F30DB400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.100532] ACPI: Dynamic OEM Table Load:
[    0.100540] ACPI: SSDT 0x00000000F2A40200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.100889] ACPI: Interpreter enabled
[    0.100911] ACPI: (supports S0 S3 S4 S5)
[    0.100912] ACPI: Using IOAPIC for interrupt routing
[    0.100936] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.105369] ACPI: Power Resource [FN00] (off)
[    0.105446] ACPI: Power Resource [FN01] (off)
[    0.105520] ACPI: Power Resource [FN02] (off)
[    0.105596] ACPI: Power Resource [FN03] (off)
[    0.105669] ACPI: Power Resource [FN04] (off)
[    0.106189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.106193] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.106289] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.106375] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.106376] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.106726] PCI host bridge to bus 0000:00
[    0.106728] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.106729] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.106730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.106731] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.106732] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.106733] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.106734] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.106735] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.106736] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.106737] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.106738] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.106744] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.106825] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.106853] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.106891] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.106950] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.106970] pci 0000:00:16.0: reg 0x10: [mem 0xf7f0a000-0xf7f0a00f 64bit]
[    0.107040] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.107119] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.107135] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f08000-0xf7f083ff]
[    0.107214] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.107265] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.107303] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.107318] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
[    0.107385] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.107430] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.107469] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.107591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.107642] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.107681] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.107751] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.107795] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.107833] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.107849] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f07000-0xf7f073ff]
[    0.107927] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.107977] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.108015] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.108176] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.108188] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.108195] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.108201] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.108208] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.108214] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.108220] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f06000-0xf7f067ff]
[    0.108257] pci 0000:00:1f.2: PME# supported from D3hot
[    0.108327] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.108340] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f05000-0xf7f050ff 64bit]
[    0.108359] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.108474] pci 0000:01:00.0: [1002:95c5] type 00 class 0x030000
[    0.108486] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.108495] pci 0000:01:00.0: reg 0x18: [mem 0xf7e20000-0xf7e2ffff 64bit]
[    0.108500] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.108511] pci 0000:01:00.0: reg 0x30: [mem 0xf7e00000-0xf7e1ffff pref]
[    0.108540] pci 0000:01:00.0: supports D1 D2
[    0.117828] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.117832] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.117835] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.117839] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.117929] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.118009] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.118031] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.118064] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.118084] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.118199] pci 0000:03:00.0: supports D1 D2
[    0.118199] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.118248] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.129839] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.129844] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.129853] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.129874] pci_bus 0000:00: on NUMA node 0
[    0.130231] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.130275] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.130317] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
[    0.130359] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.130400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.130442] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.130483] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.130524] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.130745] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.130950] SCSI subsystem initialized
[    0.130978] libata version 3.00 loaded.
[    0.131012] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.131014] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.131015] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.131015] vgaarb: loaded
[    0.131032] ACPI: bus type USB registered
[    0.131045] usbcore: registered new interface driver usbfs
[    0.131054] usbcore: registered new interface driver hub
[    0.131062] usbcore: registered new device driver usb
[    0.131141] PCI: Using ACPI for IRQ routing
[    0.132571] PCI: pci_cache_line_size set to 64 bytes
[    0.132604] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.132605] e820: reserve RAM buffer [mem 0xde0b5000-0xdfffffff]
[    0.132606] e820: reserve RAM buffer [mem 0xde85e000-0xdfffffff]
[    0.132607] e820: reserve RAM buffer [mem 0xdecc1000-0xdfffffff]
[    0.132608] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.132609] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[    0.132696] NetLabel: Initializing
[    0.132696] NetLabel:  domain hash size = 128
[    0.132697] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.132708] NetLabel:  unlabeled traffic allowed by default
[    0.132813] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.132817] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.134831] clocksource: Switched to clocksource hpet
[    0.142229] VFS: Disk quotas dquot_6.6.0
[    0.142244] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.142325] AppArmor: AppArmor Filesystem Enabled
[    0.142371] pnp: PnP ACPI init
[    0.142475] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.142478] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.142545] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.142546] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.142547] system 00:01: [io  0xffff] has been reserved
[    0.142549] system 00:01: [io  0xffff] has been reserved
[    0.142550] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.142551] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.142552] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.142553] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.142555] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142580] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.142624] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.142626] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.142697] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.142698] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142742] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.142744] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.142940] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.142942] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.142943] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.142944] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.142945] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.142946] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.142949] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.142950] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.142951] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.142953] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.142954] system 00:06: [mem 0xf0100000-0xf0100fff] has been reserved
[    0.142956] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.143056] pnp: PnP ACPI: found 7 devices
[    0.143058] PnPBIOS: Disabled
[    0.179136] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.179164] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.179165] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.179168] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.179170] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.179172] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.179189] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.179190] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.179196] pci 0000:00:1c.5:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.179202] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.179203] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.179204] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.179205] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.179206] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.179207] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.179208] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.179209] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.179210] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.179211] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.179212] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.179213] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.179214] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.179215] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.179216] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.179277] NET: Registered protocol family 2
[    0.179392] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.179400] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.179414] TCP: Hash tables configured (established 8192 bind 8192)
[    0.179425] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.179429] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.179455] NET: Registered protocol family 1
[    0.226964] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.226968] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.227009] Unpacking initramfs...
[    4.785291] Freeing initrd memory: 27828K
[    4.785548] Scanning for low memory corruption every 60 seconds
[    4.785822] audit: initializing netlink subsys (disabled)
[    4.785852] audit: type=2000 audit(1497261999.780:1): initialized
[    4.786160] Initialise system trusted keyrings
[    4.786205] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    4.787674] zbud: loaded
[    4.787974] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.788124] fuse init (API version 7.26)
[    4.788959] Key type asymmetric registered
[    4.788960] Asymmetric key parser 'x509' registered
[    4.788967] bounce: pool size: 64 pages
[    4.788995] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    4.789012] io scheduler noop registered
[    4.789013] io scheduler deadline registered
[    4.789059] io scheduler cfq registered (default)
[    4.789559] intel_idle: MWAIT substates: 0x1120
[    4.789559] intel_idle: v0.4.1 model 0x2A
[    4.789634] intel_idle: lapic_timer_reliable_states 0xffffffff
[    4.789697] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.789699] ACPI: Power Button [PWRB]
[    4.789734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.789735] ACPI: Power Button [PWRF]
[    4.790219] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    4.790337] thermal LNXTHERM:00: registered as thermal_zone0
[    4.790338] ACPI: Thermal Zone [TZ00] (28 C)
[    4.790525] thermal LNXTHERM:01: registered as thermal_zone1
[    4.790526] ACPI: Thermal Zone [TZ01] (30 C)
[    4.790556] GHES: HEST is not enabled!
[    4.790583] isapnp: Scanning for PnP cards...
[    4.794909] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.796119] Linux agpgart interface v0.103
[    4.883867] loop: module loaded
[    4.884019] libphy: Fixed MDIO Bus: probed
[    4.884020] tun: Universal TUN/TAP device driver, 1.6
[    4.884020] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.884044] PPP generic driver version 2.4.2
[    4.884075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.884076] ehci-pci: EHCI PCI platform driver
[    4.884181] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    4.884186] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    4.884196] ehci-pci 0000:00:1a.0: debug port 2
[    4.888102] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    4.888112] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7f08000
[    4.902838] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    4.902875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.902876] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.902877] usb usb1: Product: EHCI Host Controller
[    4.902878] usb usb1: Manufacturer: Linux 4.10.0-19-generic ehci_hcd
[    4.902879] usb usb1: SerialNumber: 0000:00:1a.0
[    4.902976] hub 1-0:1.0: USB hub found
[    4.902980] hub 1-0:1.0: 2 ports detected
[    4.903167] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    4.903170] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    4.903179] ehci-pci 0000:00:1d.0: debug port 2
[    4.907083] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    4.907090] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f07000
[    4.922841] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    4.922871] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.922872] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.922873] usb usb2: Product: EHCI Host Controller
[    4.922874] usb usb2: Manufacturer: Linux 4.10.0-19-generic ehci_hcd
[    4.922875] usb usb2: SerialNumber: 0000:00:1d.0
[    4.922969] hub 2-0:1.0: USB hub found
[    4.922973] hub 2-0:1.0: 2 ports detected
[    4.923083] ehci-platform: EHCI generic platform driver
[    4.923091] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.923092] ohci-pci: OHCI PCI platform driver
[    4.923101] ohci-platform: OHCI generic platform driver
[    4.923106] uhci_hcd: USB Universal Host Controller Interface driver
[    4.923149] i8042: PNP: No PS/2 controller found.
[    4.923192] mousedev: PS/2 mouse device common for all mice
[    4.923274] rtc_cmos 00:02: RTC can wake from S4
[    4.923392] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    4.923415] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.923420] i2c /dev entries driver
[    4.923462] device-mapper: uevent: version 1.0.3
[    4.923510] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    4.923527] platform eisa.0: Probing EISA bus 0
[    4.923528] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    4.923529] platform eisa.0: Cannot allocate resource for EISA slot 1
[    4.923530] platform eisa.0: Cannot allocate resource for EISA slot 2
[    4.923531] platform eisa.0: Cannot allocate resource for EISA slot 3
[    4.923532] platform eisa.0: Cannot allocate resource for EISA slot 4
[    4.923533] platform eisa.0: Cannot allocate resource for EISA slot 5
[    4.923533] platform eisa.0: Cannot allocate resource for EISA slot 6
[    4.923534] platform eisa.0: Cannot allocate resource for EISA slot 7
[    4.923535] platform eisa.0: Cannot allocate resource for EISA slot 8
[    4.923536] platform eisa.0: EISA: Detected 0 cards
[    4.923539] cpufreq_nforce2: No nForce2 chipset
[    4.923543] intel_pstate: Intel P-state driver initializing
[    4.926260] ledtrig-cpu: registered to indicate activity on CPUs
[    4.926436] NET: Registered protocol family 10
[    4.929015] Segment Routing with IPv6
[    4.929030] NET: Registered protocol family 17
[    4.929037] Key type dns_resolver registered
[    5.013173] microcode: sig=0x206a7, pf=0x2, revision=0x28
[    5.013203] microcode: Microcode Update Driver: v2.2.
[    5.013206] Using IPI No-Shortcut mode
[    5.013288] registered taskstats version 1
[    5.013296] Loading compiled-in X.509 certificates
[    5.016843] Loaded X.509 cert 'Build time autogenerated kernel key: 017ae2adfa341a0203eb35676b4f49c527f2596c'
[    5.016854] zswap: loaded using pool lzo/zbud
[    5.027468] Key type big_key registered
[    5.027471] Key type trusted registered
[    5.028540] Key type encrypted registered
[    5.028542] AppArmor: AppArmor sha1 policy hashing enabled
[    5.028544] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    5.028557] evm: HMAC attrs: 0x1
[    5.028723]   Magic number: 5:26:123
[    5.028747] acpi LNXSYBUS:01: hash matches
[    5.028800] rtc_cmos 00:02: setting system clock to 2017-06-12 10:06:40 UTC (1497262000)
[    5.028844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    5.028845] EDD information not available.
[    5.028895] PM: Hibernation image not present or could not be loaded.
[    5.143323] isapnp: No Plug & Play device found
[    5.143539] Freeing unused kernel memory: 1004K
[    5.143589] Write protecting the kernel text: 8420k
[    5.143698] Write protecting the kernel read-only data: 3204k
[    5.143699] NX-protecting the kernel data: 5916k
[    5.143854] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    5.153487] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.153556] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.153569] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    5.155183] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.155349] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.156469] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.156517] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.156574] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.156624] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.156680] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.188902] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.188910] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.189711] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xf841b000, 50:46:5d:08:68:ad, XID 08000880 IRQ 25
[    5.189712] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.193902] wmi: Mapper loaded
[    5.205189] [drm] Initialized
[    5.207953] ahci 0000:00:1f.2: version 3.0
[    5.208137] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    5.208138] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    5.208891] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    5.234838] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.250833] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.254739] scsi host0: ahci
[    5.255447] scsi host1: ahci
[    5.256096] scsi host2: ahci
[    5.256744] scsi host3: ahci
[    5.256791] ata1: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06100 irq 26
[    5.256792] ata2: SATA max UDMA/133 abar m2048@0xf7f06000 port 0xf7f06180 irq 26
[    5.256793] ata3: DUMMY
[    5.256793] ata4: DUMMY
[    5.263038] [drm] radeon kernel modesetting enabled.
[    5.263235] [drm] initializing kernel modesetting (RV620 0x1002:0x95C5 0x1462:0x1181 0x00).
[    5.263245] [drm] register mmio base: 0xF7E20000
[    5.263245] [drm] register mmio size: 65536
[    5.263273] ATOM BIOS: 113
[    5.263284] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[    5.263285] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[    5.263288] [drm] Detected VRAM RAM=256M, BAR=256M
[    5.263288] [drm] RAM width 64bits DDR
[    5.263330] [TTM] Zone  kernel: Available graphics memory: 428330 kiB
[    5.263331] [TTM] Zone highmem: Available graphics memory: 2046706 kiB
[    5.263331] [TTM] Initializing pool allocator
[    5.263336] [TTM] Initializing DMA pool allocator
[    5.263352] [drm] radeon: 256M of VRAM memory ready
[    5.263352] [drm] radeon: 512M of GTT memory ready.
[    5.263356] [drm] Loading RV620 Microcode
[    5.263415] [drm] radeon: power management initialized
[    5.263460] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.263708] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    5.271323] [drm] PCIE GART of 512M enabled (table at 0x0000000000142000).
[    5.271350] radeon 0000:01:00.0: WB enabled
[    5.271352] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffc15c00
[    5.271533] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x00000000000521d0 and cpu addr 0xf8c121d0
[    5.271535] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.271535] [drm] Driver supports precise vblank timestamp query.
[    5.271536] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    5.271573] radeon 0000:01:00.0: radeon: using MSI.
[    5.271589] [drm] radeon: irq initialized.
[    5.287010] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    5.302783] [drm] ring test on 0 succeeded in 1 usecs
[    5.383174] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.383176] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.383424] hub 1-1:1.0: USB hub found
[    5.383518] hub 1-1:1.0: 4 ports detected
[    5.399173] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    5.399174] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.399296] hub 2-1:1.0: USB hub found
[    5.399394] hub 2-1:1.0: 6 ports detected
[    5.477413] [drm] ring test on 5 succeeded in 1 usecs
[    5.477416] [drm] UVD initialized successfully.
[    5.477505] [drm] ib test on ring 0 succeeded in 0 usecs
[    5.569100] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.569117] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.570438] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[    5.570468] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f309bcf0), AE_NOT_FOUND (20160930/psparse-543)
[    5.570678] ata1.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
[    5.570679] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    5.571447] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[    5.571475] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node f309bcd8), AE_NOT_FOUND (20160930/psparse-543)
[    5.571507] ata2.00: ATAPI: ATAPI   iHAS122   C, XL08, max UDMA/100
[    5.572069] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[    5.572097] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node f309bcf0), AE_NOT_FOUND (20160930/psparse-543)
[    5.572330] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
[    5.572358] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node f309bcd8), AE_NOT_FOUND (20160930/psparse-543)
[    5.572391] ata2.00: configured for UDMA/100
[    5.572397] ata1.00: configured for UDMA/133
[    5.572511] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
[    5.663074] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    5.663083] sd 0:0:0:0: [sda] Write Protect is off
[    5.663084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.663098] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.663118] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.666394] scsi 1:0:0:0: CD-ROM            ATAPI    iHAS122   C      XL08 PQ: 0 ANSI: 5
[    5.670850] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    5.686851] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[    5.695804] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.695806] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.695964] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.696011] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.703414]  sda: sda1 sda2 sda3 sda4 sda5
[    5.704027] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.784017] usb 1-1.3: New USB device found, idVendor=0781, idProduct=5567
[    5.784019] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.784020] usb 1-1.3: Product: Cruzer Blade
[    5.784021] usb 1-1.3: Manufacturer: SanDisk
[    5.784022] usb 1-1.3: SerialNumber: 4C530001250106113384
[    5.786836] tsc: Refined TSC clocksource calibration: 3000.020 MHz
[    5.786841] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e5853ced, max_idle_ns: 440795278721 ns
[    5.790109] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    5.790266] scsi host4: usb-storage 1-1.3:1.0
[    5.790334] usbcore: registered new interface driver usb-storage
[    5.793271] usbcore: registered new interface driver uas
[    5.806392] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8189
[    5.806394] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.806395] usb 2-1.2: Product: RTL8187B_WLAN_Adapter
[    5.806396] usb 2-1.2: Manufacturer: Manufacturer_Realtek
[    5.806397] usb 2-1.2: SerialNumber: 00e04c000001
[    5.806763] random: fast init done
[    5.862844] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
[    5.890848] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[    5.977271] usb 1-1.4: New USB device found, idVendor=1a81, idProduct=1004
[    5.977274] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.977276] usb 1-1.4: Product: Wireless Dongle
[    5.977278] usb 1-1.4: Manufacturer: G-Tech
[    5.983121] hidraw: raw HID events driver (C) Jiri Kosina
[    5.996602] usbcore: registered new interface driver usbhid
[    5.996602] usbhid: USB HID core driver
[    6.002392] input: G-Tech Wireless Dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A81:1004.0001/input/input2
[    6.014016] usb 2-1.6: New USB device found, idVendor=1a2c, idProduct=0023
[    6.014017] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.014018] usb 2-1.6: Product: USB Keykoard
[    6.014019] usb 2-1.6: Manufacturer: USB
[    6.016766] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:1A2C:0023.0003/input/input3
[    6.058968] hid-generic 0003:1A81:1004.0001: input,hidraw0: USB HID v1.11 Keyboard [G-Tech Wireless Dongle] on usb-0000:00:1a.0-1.4/input0
[    6.059197] input: G-Tech Wireless Dongle as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A81:1004.0002/input/input4
[    6.119040] hid-generic 0003:1A2C:0023.0003: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input0
[    6.121872] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1A2C:0023.0004/input/input5
[    6.138939] [drm] ib test on ring 5 succeeded
[    6.139371] [drm] Radeon Display Connectors
[    6.139372] [drm] Connector 0:
[    6.139372] [drm]   VGA-1
[    6.139373] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[    6.139373] [drm]   Encoders:
[    6.139374] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    6.139374] [drm] Connector 1:
[    6.139375] [drm]   DVI-I-1
[    6.139375] [drm]   HPD1
[    6.139376] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[    6.139376] [drm]   Encoders:
[    6.139377] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.139377] [drm]     DFP1: INTERNAL_KLDSCP_LVTMA
[    6.179212] hid-generic 0003:1A81:1004.0002: input,hiddev0,hidraw2: USB HID v1.11 Mouse [G-Tech Wireless Dongle] on usb-0000:00:1a.0-1.4/input1
[    6.184551] [drm] fb mappable at 0xE0243000
[    6.184552] [drm] vram apper at 0xE0000000
[    6.184552] [drm] size 8294400
[    6.184553] [drm] fb depth is 24
[    6.184553] [drm]    pitch is 7680
[    6.184616] fbcon: radeondrmfb (fb0) is primary device
[    6.213288] Console: switching to colour frame buffer device 240x67
[    6.219032] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    6.234867] [drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
[    6.239013] hid-generic 0003:1A2C:0023.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input1
[    6.810949] clocksource: Switched to clocksource tsc
[    6.815659] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Blade     1.00 PQ: 0 ANSI: 6
[    6.816274] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    6.817519] sd 4:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)
[    6.818540] sd 4:0:0:0: [sdb] Write Protect is off
[    6.818542] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    6.819517] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    6.824782]  sdb: sdb1
[    6.829135] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    8.975121] random: crng init done
[    9.046256] ISO 9660 Extensions: Microsoft Joliet Level 3
[    9.051631] ISO 9660 Extensions: RRIP_1991A
[    9.076494] aufs 4.x-rcN-20170206
[   14.235042] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.238150] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   14.238252] systemd[1]: Detected architecture x86.
[   14.238439] systemd[1]: Set hostname to <lubuntu>.
[   14.238601] systemd[1]: Initializing machine ID from random generator.
[   14.305065] systemd[1]: Listening on udev Kernel Socket.
[   14.305156] systemd[1]: Listening on Journal Socket.
[   14.305289] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   14.305339] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.305350] systemd[1]: Reached target Swap.
[   14.305479] systemd[1]: Created slice User and Session Slice.
[   14.448912] systemd-journald[1062]: Received request to flush runtime journal from PID 1
[   14.508399] lp: driver loaded but no devices found
[   14.521742] ppdev: user-space parallel port driver
[   14.839396] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.066984] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[   15.066989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.066991] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   15.066994] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
[   15.066996] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.066996] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   15.066999] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
[   15.067001] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.067001] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[   15.067003] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160930/utaddress-247)
[   15.067005] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   15.067006] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   15.183097] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[   15.183098] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[   15.183098] RAPL PMU: hw unit of domain package 2^-16 Joules
[   15.183099] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[   15.416493] zram: Added device: zram0
[   15.418076] zram: Added device: zram1
[   15.607413] zram0: detected capacity change from 0 to 1047916544
[   15.748733] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[   15.748735] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.748736] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[   15.748737] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[   15.748738] snd_hda_codec_via hdaudioC0D0:    inputs:
[   15.748739] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[   15.748740] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[   15.748741] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[   15.754865] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   15.754954] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   15.755017] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   15.755081] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   15.755140] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   15.769258] Adding 1023352k swap on /dev/zram0.  Priority:5 extents:1 across:1023352k SSFS
[   15.769784] zram1: detected capacity change from 0 to 1047916544
[   15.774037] Adding 1023352k swap on /dev/zram1.  Priority:5 extents:1 across:1023352k SSFS
[   15.906856] kvm: disabled by bios
[   15.959365] kvm: disabled by bios
[   16.325688] intel_rapl: Found RAPL domain package
[   16.325689] intel_rapl: Found RAPL domain core
[   16.325690] intel_rapl: Found RAPL domain uncore
[   16.325693] intel_rapl: RAPL package 0 domain package locked by BIOS
[   16.803169] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   16.803466] ieee80211 phy0: hwaddr 00:11:3b:18:dd:85, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[   16.835797] asus_wmi: ASUS WMI generic driver loaded
[   16.843430] rtl8187: Customer ID is 0x00
[   16.844296] rtl8187: wireless switch is on
[   16.844327] usbcore: registered new interface driver rtl8187
[   16.871828] asus_wmi: Initialization: 0x0
[   16.871852] asus_wmi: BIOS WMI version: 0.9
[   16.871886] asus_wmi: SFUN value: 0x0
[   16.872434] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input11
[   16.872732] asus_wmi: Number of fans: 1
[   16.899163] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   17.065737] r8169 0000:03:00.0 enp3s0: link down
[   17.066494] r8169 0000:03:00.0 enp3s0: link down
[   17.066780] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   17.068108] rtl8187 2-1.2:1.0 wlx00113b18dd85: renamed from wlan0
[   17.102650] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   20.165188] r8169 0000:03:00.0 enp3s0: link up
[   21.540037] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   21.658248] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   25.620337] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   25.687570] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   40.892275] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   65.503242] wlx00113b18dd85: authenticate with 1c:a5:32:b1:59:38
[   65.845805] wlx00113b18dd85: send auth to 1c:a5:32:b1:59:38 (try 1/3)
[   65.848014] wlx00113b18dd85: authenticated
[   70.850920] wlx00113b18dd85: aborting authentication with 1c:a5:32:b1:59:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[   73.439216] wlx00113b18dd85: authenticate with 1c:a5:32:b1:59:38
[   73.777854] wlx00113b18dd85: send auth to 1c:a5:32:b1:59:38 (try 1/3)
[   73.780548] wlx00113b18dd85: authenticated
[   78.780385] wlx00113b18dd85: aborting authentication with 1c:a5:32:b1:59:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[   81.801174] wlx00113b18dd85: authenticate with 1c:a5:32:b1:59:38
[   82.140554] wlx00113b18dd85: send auth to 1c:a5:32:b1:59:38 (try 1/3)
[   82.142595] wlx00113b18dd85: authenticated
[   87.152057] wlx00113b18dd85: aborting authentication with 1c:a5:32:b1:59:38 by local choice (Reason: 3=DEAUTH_LEAVING)
[   88.026178] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[   91.952698] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[  129.142928] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[  225.389129] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[  225.739617] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[  225.743288] wlx00113b18dd85: authenticated
[  230.743275] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[  245.536292] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[  245.874812] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[  245.878682] wlx00113b18dd85: authenticated
[  247.989064] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[  248.164815] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[  252.103787] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[  599.898567] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[  918.949977] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 1237.931322] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 1556.934764] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 1875.950892] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 2194.993893] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 2513.983841] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 2832.942730] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 2837.010954] usb 2-1-port6: disabled by hub (EMI?), re-enabling...
[ 2837.010962] usb 2-1.6: USB disconnect, device number 4
[ 2837.345528] usb 2-1.6: new low-speed USB device number 5 using ehci-pci
[ 2837.465331] usb 2-1.6: New USB device found, idVendor=1a2c, idProduct=0023
[ 2837.465334] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2837.465336] usb 2-1.6: Product: USB Keykoard
[ 2837.465338] usb 2-1.6: Manufacturer: USB
[ 2837.469134] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:1A2C:0023.0005/input/input12
[ 2837.525799] hid-generic 0003:1A2C:0023.0005: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input0
[ 2837.528560] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1A2C:0023.0006/input/input13
[ 2837.585673] hid-generic 0003:1A2C:0023.0006: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input1
[ 3151.952508] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 3471.027835] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 3790.023589] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 4109.025619] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 4427.974687] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 4747.020917] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 4878.848705] usb 2-1.6: USB disconnect, device number 5
[ 4879.177344] usb 2-1.6: new low-speed USB device number 6 using ehci-pci
[ 4879.296737] usb 2-1.6: New USB device found, idVendor=1a2c, idProduct=0023
[ 4879.296740] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4879.296742] usb 2-1.6: Product: USB Keykoard
[ 4879.296743] usb 2-1.6: Manufacturer: USB
[ 4879.300513] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:1A2C:0023.0007/input/input14
[ 4879.357759] hid-generic 0003:1A2C:0023.0007: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input0
[ 4879.360422] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:1A2C:0023.0008/input/input15
[ 4879.417549] hid-generic 0003:1A2C:0023.0008: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.0-1.6/input1
[ 5066.057312] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 5385.085284] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 5704.090594] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 6023.076346] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 6342.052188] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 6661.042996] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 6980.105242] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7299.119110] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7422.835726] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7425.182871] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 7425.521711] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 7425.523808] wlx00113b18dd85: authenticated
[ 7430.526857] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7443.011010] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 7443.353676] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 7443.554503] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 2/3)
[ 7443.758509] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 3/3)
[ 7443.866774] wlx00113b18dd85: authenticated
[ 7448.110601] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7448.288162] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7452.255977] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7800.110852] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 7998.144798] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8000.496330] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8000.838895] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8000.842273] wlx00113b18dd85: authenticated
[ 8005.843021] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8018.337967] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8018.684566] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8018.686201] wlx00113b18dd85: authenticated
[ 8023.159505] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8023.339479] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8027.303666] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8295.026644] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8297.377874] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8297.716468] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8297.718513] wlx00113b18dd85: authenticated
[ 8302.717052] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8315.206798] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8315.553917] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8315.556471] wlx00113b18dd85: authenticated
[ 8320.182845] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8320.360778] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8324.300135] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8346.174389] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8346.274856] r8169 0000:03:00.0 enp3s0: link down
[ 8346.274914] r8169 0000:03:00.0 enp3s0: link down
[ 8346.274989] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8346.276300] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8348.661026] r8169 0000:03:00.0 enp3s0: link up
[ 8350.113545] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8350.113566] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 8354.081952] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8362.163305] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8362.259686] r8169 0000:03:00.0 enp3s0: link down
[ 8362.259731] r8169 0000:03:00.0 enp3s0: link down
[ 8362.259785] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 8362.261288] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8364.599758] r8169 0000:03:00.0 enp3s0: link up
[ 8366.098356] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8366.217095] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 8370.042746] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8370.089047] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8379.699154] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8379.740395] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8379.916725] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8379.918319] wlx00113b18dd85: authenticated
[ 8384.921572] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8387.498605] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8387.837234] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8387.839737] wlx00113b18dd85: authenticated
[ 8392.840342] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8395.815013] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8396.161600] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8396.163302] wlx00113b18dd85: authenticated
[ 8401.163047] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8404.643386] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8404.982006] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8404.984175] wlx00113b18dd85: authenticated
[ 8405.184216] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8405.360665] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8409.288622] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8723.330148] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8725.661525] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8726.000118] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8726.201125] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 2/3)
[ 8726.405119] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 3/3)
[ 8726.609145] wlx00113b18dd85: authentication with 00:1d:aa:fb:b9:b8 timed out
[ 8741.419305] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 8741.770041] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 8741.771939] wlx00113b18dd85: authenticated
[ 8746.775600] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 8748.202421] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8752.125451] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 8905.433881] wl: loading out-of-tree module taints kernel.
[ 8905.433884] wl: module license 'MIXED/Proprietary' taints kernel.
[ 8905.433884] Disabling lock debugging due to kernel taint
[ 8905.436349] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 9001.503112] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9011.154946] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 9011.493802] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9011.495628] wlx00113b18dd85: authenticated
[ 9016.499120] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9027.234156] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9031.433931] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9124.536173] usb 2-1.4: new high-speed USB device number 7 using ehci-pci
[ 9124.660452] usb 2-1.4: New USB device found, idVendor=148f, idProduct=5572
[ 9124.660454] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 9124.660456] usb 2-1.4: Product: 802.11 n WLAN
[ 9124.660457] usb 2-1.4: Manufacturer: Ralink
[ 9124.660459] usb 2-1.4: SerialNumber: 1.0
[ 9124.764209] usb 2-1.4: reset high-speed USB device number 7 using ehci-pci
[ 9124.885744] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[ 9124.914195] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 9124.914789] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 9124.915232] usbcore: registered new interface driver rt2800usb
[ 9124.936163] rt2800usb 2-1.4:1.0 wlxe894f617ce28: renamed from wlan0
[ 9124.971848] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9124.971898] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 9124.982403] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 9125.318714] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9126.062832] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9126.104425] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9155.284477] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9157.643287] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 9157.994149] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9157.996059] wlx00113b18dd85: authenticated
[ 9162.997044] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9169.354346] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9175.480737] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 9175.819299] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9175.821150] wlx00113b18dd85: authenticated
[ 9180.242482] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9180.418298] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9184.414271] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9192.734955] wlxe894f617ce28: authenticate with 00:1d:aa:fb:b9:b8
[ 9192.842367] wlxe894f617ce28: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9192.844443] wlxe894f617ce28: authenticated
[ 9206.264089] wlxe894f617ce28: authenticate with 00:1d:aa:fb:b9:b8
[ 9206.369000] wlxe894f617ce28: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9206.370766] wlxe894f617ce28: authenticated
[ 9210.247176] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9211.097992] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[ 9372.375971] usb 2-1.4: USB disconnect, device number 7
[ 9372.379724] ieee80211 phy1: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x0438 with error -19
[ 9532.221738] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9643.984541] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9646.343576] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 9646.682311] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9646.684130] wlx00113b18dd85: authenticated
[ 9651.683401] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9664.156716] wlx00113b18dd85: authenticate with 00:1d:aa:fb:b9:b8
[ 9664.495241] wlx00113b18dd85: send auth to 00:1d:aa:fb:b9:b8 (try 1/3)
[ 9664.497150] wlx00113b18dd85: authenticated
[ 9669.276695] wlx00113b18dd85: aborting authentication with 00:1d:aa:fb:b9:b8 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 9669.450030] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[ 9673.394222] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[10021.332740] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[10340.316409] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[10659.279947] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[10978.280451] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[11060.680939] usb 2-1.2: USB disconnect, device number 3
[11074.982109] usb 2-1.2: new high-speed USB device number 8 using ehci-pci
[11075.098203] usb 2-1.2: New USB device found, idVendor=0bda, idProduct=8189
[11075.098206] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11075.098208] usb 2-1.2: Product: RTL8187B_WLAN_Adapter
[11075.098210] usb 2-1.2: Manufacturer: Manufacturer_Realtek
[11075.098212] usb 2-1.2: SerialNumber: 00e04c000001
[11075.367500] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[11075.368443] ieee80211 phy2: hwaddr 00:11:3b:18:dd:85, RTL8187BvE V0 + rtl8225z2, rfkill mask 2
[11075.398939] rtl8187: Customer ID is 0x00
[11075.400134] rtl8187: wireless switch is on
[11075.419073] rtl8187 2-1.2:1.0 wlx00113b18dd85: renamed from wlan0
[11075.441930] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[11079.279040] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[11083.230749] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[11083.274414] IPv6: ADDRCONF(NETDEV_UP): wlx00113b18dd85: link is not ready
[11109.064491] usb 2-1.2: USB disconnect, device number 8
[11115.174928] usb 2-1.2: new high-speed USB device number 9 using ehci-pci
[11115.299479] usb 2-1.2: New USB device found, idVendor=148f, idProduct=5572
[11115.299482] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11115.299484] usb 2-1.2: Product: 802.11 n WLAN
[11115.299485] usb 2-1.2: Manufacturer: Ralink
[11115.299487] usb 2-1.2: SerialNumber: 1.0
[11115.390913] usb 2-1.2: reset high-speed USB device number 9 using ehci-pci
[11115.508474] ieee80211 phy3: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[11115.537028] ieee80211 phy3: rt2x00_set_rf: Info - RF chipset 000f detected
[11115.537614] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[11115.575781] rt2800usb 2-1.2:1.0 wlxe894f617ce28: renamed from wlan0
[11115.603081] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11115.603134] ieee80211 phy3: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[11115.603171] ieee80211 phy3: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[11115.940547] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11116.685287] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11116.723629] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11232.967225] usb 2-1.2: USB disconnect, device number 9
[11234.471192] usb 2-1.2: new high-speed USB device number 10 using ehci-pci
[11234.595786] usb 2-1.2: New USB device found, idVendor=148f, idProduct=5572
[11234.595789] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11234.595792] usb 2-1.2: Product: 802.11 n WLAN
[11234.595793] usb 2-1.2: Manufacturer: Ralink
[11234.595795] usb 2-1.2: SerialNumber: 1.0
[11234.687195] usb 2-1.2: reset high-speed USB device number 10 using ehci-pci
[11234.804622] ieee80211 phy4: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detected
[11234.832955] ieee80211 phy4: rt2x00_set_rf: Info - RF chipset 000f detected
[11234.833544] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
[11234.849384] rt2800usb 2-1.2:1.0 wlxe894f617ce28: renamed from wlan0
[11234.866582] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11234.866637] ieee80211 phy4: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[11234.866677] ieee80211 phy4: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[11235.209602] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11235.949590] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready
[11235.987992] IPv6: ADDRCONF(NETDEV_UP): wlxe894f617ce28: link is not ready