Device = Panda Wireless PAU05
=============================
[ 802.508078] usb 3-5: new high-speed USB device number 8 using xhci_hcd
[ 802.666079] usb 3-5: New USB device found, idVendor=148f, idProduct=5372
[ 802.666083] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 802.666085] usb 3-5: Product: 802.11 n WLAN
[ 802.666087] usb 3-5: Manufacturer: Ralink
[ 802.788216] usb 3-5: reset high-speed USB device number 8 using xhci_hcd
[ 802.937728] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[ 802.949641] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 5372 detected
[ 802.950056] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 802.985021] rt2800usb 3-5:1.0 wlx9cefd5fe5201: renamed from wlan0
[ 803.020075] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 842.317466] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 842.317511] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 842.507746] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 842.559948] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 844.027565] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 845.332487] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 845.363758] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 845.365289] wlx9cefd5fe5201: authenticated
[ 851.700423] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 851.734694] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 851.736084] wlx9cefd5fe5201: authenticated
[ 858.460396] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 858.494895] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 858.496293] wlx9cefd5fe5201: authenticated
[ 865.720386] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 865.754838] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 865.756315] wlx9cefd5fe5201: authenticated
[ 869.004718] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 869.219571] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 869.459538] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 869.500568] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 869.522672] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 869.728060] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 2/3)
[ 869.729507] wlx9cefd5fe5201: authenticated
[ 886.976521] wlx9cefd5fe5201: authenticate with 00:15:ff:99:6a:3a
[ 887.006740] wlx9cefd5fe5201: send auth to 00:15:ff:99:6a:3a (try 1/3)
[ 887.008220] wlx9cefd5fe5201: authenticated
[ 895.231639] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 895.248231] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready
[ 895.463570] IPv6: ADDRCONF(NETDEV_UP): wlx9cefd5fe5201: link is not ready