1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-36-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: HGST HTS545050A7E380
Serial Number: 130918TE85134N0HH4PR
LU WWN Device Id: 5 000cca 7adc70a71
Firmware Version: GG2OAH20
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Mar 7 12:42:45 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 117) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 077 077 062 Pre-fail Always - 23986999
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 220 220 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 098 098 000 Old_age Always - 3547
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 125
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 066 066 000 Old_age Always - 15066
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3530
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 121
193 Load_Cycle_Count 0x0012 052 052 000 Old_age Always - 480940
194 Temperature_Celsius 0x0002 176 176 000 Old_age Always - 34 (Min/Max 8/52)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 131
197 Current_Pending_Sector 0x0022 096 096 000 Old_age Always - 304
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 2
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 955 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 955 occurred at disk power-on lifetime: 15066 hours (627 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 88 46 fc 03 Error: UNC at LBA = 0x03fc4688 = 66864776
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 60 88 46 fc 40 00 00:46:00.676 READ FPDMA QUEUED
60 08 58 68 46 fc 40 00 00:46:00.588 READ FPDMA QUEUED
60 08 50 60 46 fc 40 00 00:46:00.587 READ FPDMA QUEUED
60 08 48 58 46 fc 40 00 00:46:00.587 READ FPDMA QUEUED
60 08 40 50 46 fc 40 00 00:46:00.587 READ FPDMA QUEUED
Error 954 occurred at disk power-on lifetime: 15066 hours (627 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 78 07 41 02 Error: UNC at LBA = 0x02410778 = 37816184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 80 78 07 41 40 00 00:45:49.930 READ FPDMA QUEUED
60 08 78 70 07 41 40 00 00:45:49.885 READ FPDMA QUEUED
60 08 70 68 07 41 40 00 00:45:49.872 READ FPDMA QUEUED
60 08 68 10 02 98 40 00 00:45:49.869 READ FPDMA QUEUED
60 08 60 20 02 98 40 00 00:45:49.865 READ FPDMA QUEUED
Error 953 occurred at disk power-on lifetime: 15066 hours (627 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 60 26 fc 03 Error: UNC at LBA = 0x03fc2660 = 66856544
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 60 26 fc 40 00 00:44:17.847 READ FPDMA QUEUED
60 08 50 c0 25 fc 40 00 00:44:17.477 READ FPDMA QUEUED
60 08 48 78 a4 98 40 00 00:44:17.470 READ FPDMA QUEUED
60 08 40 40 95 98 40 00 00:44:17.465 READ FPDMA QUEUED
60 08 38 e8 8f 98 40 00 00:44:17.454 READ FPDMA QUEUED
Error 952 occurred at disk power-on lifetime: 15066 hours (627 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 7f fc 03 Error: UNC at LBA = 0x03fc7fc0 = 66879424
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 80 c0 7f fc 40 00 00:43:55.863 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:43:55.863 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:43:55.863 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:43:55.862 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:43:55.862 SET FEATURES [Set transfer mode]
Error 951 occurred at disk power-on lifetime: 15066 hours (627 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 7f fc 03 Error: UNC at LBA = 0x03fc7fc0 = 66879424
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 c0 7f fc 40 00 00:43:52.449 READ FPDMA QUEUED
60 08 50 e8 9f 97 40 00 00:43:52.419 READ FPDMA QUEUED
60 08 48 88 67 97 40 00 00:43:52.388 READ FPDMA QUEUED
60 08 40 58 60 97 40 00 00:43:52.367 READ FPDMA QUEUED
60 08 38 90 1c 97 40 00 00:43:52.367 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|