[    0.000000] Linux version 4.9.0-15-generic (buildd@lcy01-21) (gcc version 6.3.0 20161229 (Ubuntu 6.3.0-2ubuntu1) ) #16-Ubuntu SMP Fri Jan 20 15:31:12 UTC 2017 (Ubuntu 4.9.0-15.16-generic 4.9.5)
[    0.000000] Command line: BOOT_IMAGE=(hd1,7)/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa378fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa379000-0x00000000aa3f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aa3f4000-0x00000000aa40afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aa40b000-0x00000000abb54fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000abb55000-0x00000000abffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000abfff000-0x00000000abffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xa79d0018-0xa79e0057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a79d0017] usable
[    0.000000] reserve setup_data: [mem 0x00000000a79d0018-0x00000000a79e0057] usable
[    0.000000] reserve setup_data: [mem 0x00000000a79e0058-0x00000000aa378fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000aa379000-0x00000000aa3f3fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000aa3f4000-0x00000000aa40afff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000aa40b000-0x00000000abb54fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000abb55000-0x00000000abffefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000abfff000-0x00000000abffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000014fdfffff] usable
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ESRT=0xabeb0c18  ACPI 2.0=0xaa3f8000  ACPI=0xaa3f8000  SMBIOS=0xabeaf018 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Microsoft Corporation Surface Pro 3/Surface Pro 3, BIOS 3.11.1150 12/09/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00A0000000 mask 7FF8000000 write-back
[    0.000000]   3 base 00A8000000 mask 7FFC000000 write-back
[    0.000000]   4 base 00AC000000 mask 7FFF000000 write-back
[    0.000000]   5 base 0100000000 mask 7FC0000000 write-back
[    0.000000]   6 base 0140000000 mask 7FF0000000 write-back
[    0.000000]   7 base 014FE00000 mask 7FFFE00000 uncachable
[    0.000000]   8 base 00FF000000 mask 7FFF000000 write-protect
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xac000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000abeb0c18 to 0x00000000abeb0cc8.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff98dd80097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x135413000, 0x135413fff] PGTABLE
[    0.000000] BRK [0x135414000, 0x135414fff] PGTABLE
[    0.000000] BRK [0x135415000, 0x135415fff] PGTABLE
[    0.000000] BRK [0x135416000, 0x135416fff] PGTABLE
[    0.000000] BRK [0x135417000, 0x135417fff] PGTABLE
[    0.000000] BRK [0x135418000, 0x135418fff] PGTABLE
[    0.000000] BRK [0x135419000, 0x135419fff] PGTABLE
[    0.000000] BRK [0x13541a000, 0x13541afff] PGTABLE
[    0.000000] RAMDISK: [mem 0x3e40d000-0x3fffafff]
[    0.000000] Secure boot enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000AA3F8000 000024 (v02 OEMC  )
[    0.000000] ACPI: XSDT 0x00000000AA3F80A0 0000BC (v01 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000AA405258 00010C (v05 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000AA3F81E8 00D070 (v02 OEMC   O E M C  00000300 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000ABB4E080 000040
[    0.000000] ACPI: APIC 0x00000000AA405368 000072 (v03 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000AA4053E0 000044 (v01 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000AA405428 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: HPET 0x00000000AA405798 000038 (v01 OEMC   O E M C  00000300 AMI. 00000005)
[    0.000000] ACPI: MSDM 0x00000000AA4057D0 000055 (v03 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: WDSA 0x00000000AA405828 00018D (v02 OEMC   ACTABL   00000003 INTL 20120913)
[    0.000000] ACPI: LPIT 0x00000000AA4059B8 000094 (v01 ALASKA A M I    00000000 AMI. 00000005)
[    0.000000] ACPI: DBGP 0x00000000AA405A50 000034 (v01 OEMC   O E M C  00000300 MSFT 0000005F)
[    0.000000] ACPI: HPET 0x00000000AA405A88 000038 (v01 OEMC   O E M C  00000300 MSFT 0000005F)
[    0.000000] ACPI: MCFG 0x00000000AA405AC0 00003C (v01 OEMC   O E M C  00000300 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000AA405B00 00047E (v01 OEMC   Ult0Rtd3 00001000 INTL 20120913)
[    0.000000] ACPI: TPM2 0x00000000AA405F80 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x00000000AA405FB8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000AA4064F8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000AA406FD0 00351E (v01 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000AA40A4F0 000042 (v01 OEMC   O E M C  00000300      00000000)
[    0.000000] ACPI: BGRT 0x00000000AA40A538 000038 (v01 OEMC   O E M C  00000300 AMI  00010013)
[    0.000000] ACPI: DMAR 0x00000000AA40A570 0000F0 (v01 INTEL  HSW      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14fdd5000-0x14fdfffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000014fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000aa378fff]
[    0.000000]   node   0: [mem 0x00000000abfff000-0x00000000abffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000014fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014fdfffff]
[    0.000000] On node 0 totalpages: 1024278
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10830 pages used for memmap
[    0.000000]   DMA32 zone: 693114 pages, LIFO batch:31
[    0.000000]   Normal zone: 5112 pages used for memmap
[    0.000000]   Normal zone: 327168 pages, LIFO batch:31
[    0.000000] tboot: non-0 tboot_addr but it is not of type E820_RESERVED
[    0.000000] Reserving Intel graphics memory at 0x00000000ad200000-0x00000000af1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa79d0000-0xa79d0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa79e0000-0xa79e0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa379000-0xaa3f3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa3f4000-0xaa40afff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa40b000-0xabb54fff]
[    0.000000] PM: Registered nosave memory: [mem 0xabb55000-0xabffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xac000000-0xad1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xad200000-0xaf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf200000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xaf200000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff98decfa00000 s107608 r8192 d31656 u524288
[    0.000000] pcpu-alloc: s107608 r8192 d31656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1008250
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd1,7)/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3879060K/4097112K available (8910K kernel code, 1645K rwdata, 3752K rodata, 2164K init, 2364K bss, 218052K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:728 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] tsc: Detected 2494.104 MHz processor
[    0.000028] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.20 BogoMIPS (lpj=9976416)
[    0.000031] pid_max: default: 32768 minimum: 301
[    0.000042] ACPI: Core revision 20160831
[    0.013626] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.014064] Security Framework initialized
[    0.014066] Yama: becoming mindful.
[    0.014082] AppArmor: AppArmor initialized
[    0.014379] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.015316] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015734] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.015741] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.016029] CPU: Physical Processor ID: 0
[    0.016030] CPU: Processor Core ID: 0
[    0.016035] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016036] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016040] mce: CPU supports 7 MCE banks
[    0.016051] CPU0: Thermal monitoring enabled (TM1)
[    0.016066] process: using mwait in idle threads
[    0.016069] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.016070] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.017342] Freeing SMP alternatives memory: 32K (ffffffff88dba000 - ffffffff88dc2000)
[    0.021196] ftrace: allocating 33665 entries in 132 pages
[    0.039328] smpboot: Max logical packages: 2
[    0.039334] DMAR: Host address width 39
[    0.039335] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.039343] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.039344] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.039348] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[    0.039349] DMAR: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
[    0.039350] DMAR: RMRR base: 0x000000ad000000 end: 0x000000af1fffff
[    0.039351] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.039352] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.039354] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.039355] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.039356] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.039763] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.039764] x2apic enabled
[    0.039769] Switched APIC routing to cluster x2apic.
[    0.040416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.080107] TSC deadline timer enabled
[    0.080110] smpboot: CPU0: Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz (family: 0x6, model: 0x45, stepping: 0x1)
[    0.080114] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.080163] ... version:                3
[    0.080164] ... bit width:              48
[    0.080165] ... generic registers:      4
[    0.080165] ... value mask:             0000ffffffffffff
[    0.080166] ... max period:             00007fffffffffff
[    0.080167] ... fixed-purpose events:   3
[    0.080167] ... event mask:             000000070000000f
[    0.081178] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.081282] x86: Booting SMP configuration:
[    0.081283] .... node  #0, CPUs:      #1 #2 #3
[    0.088886] x86: Booted up 1 node, 4 CPUs
[    0.088889] smpboot: Total of 4 processors activated (19952.83 BogoMIPS)
[    0.093334] devtmpfs: initialized
[    0.093401] x86/mm: Memory block size: 128MB
[    0.095671] evm: security.selinux
[    0.095671] evm: security.SMACK64
[    0.095672] evm: security.SMACK64EXEC
[    0.095672] evm: security.SMACK64TRANSMUTE
[    0.095673] evm: security.SMACK64MMAP
[    0.095673] evm: security.ima
[    0.095674] evm: security.capability
[    0.095730] PM: Registering ACPI NVS region [mem 0xaa40b000-0xabb54fff] (24420352 bytes)
[    0.096190] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.096228] pinctrl core: initialized pinctrl subsystem
[    0.096342] RTC time: 16:15:27, date: 02/13/17
[    0.096442] NET: Registered protocol family 16
[    0.109067] cpuidle: using governor ladder
[    0.121073] cpuidle: using governor menu
[    0.121074] PCCT header not found.
[    0.121122] ACPI: bus type PCI registered
[    0.121123] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.121188] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.121190] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.121204] PCI: Using configuration type 1 for base access
[    0.121255] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.121447] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.121448] mtrr: probably your BIOS does not setup all CPUs.
[    0.121448] mtrr: corrected configuration.
[    0.137203] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.137204] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.137460] ACPI: Added _OSI(Module Device)
[    0.137461] ACPI: Added _OSI(Processor Device)
[    0.137462] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.137463] ACPI: Added _OSI(Processor Aggregator Device)
[    0.137855] ACPI: Executed 1 blocks of module-level executable AML code
[    0.143348] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.144111] ACPI: Dynamic OEM Table Load:
[    0.144119] ACPI: SSDT 0xFFFF98DECA333C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.144559] ACPI: Dynamic OEM Table Load:
[    0.144567] ACPI: SSDT 0xFFFF98DECA23F000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120913)
[    0.145032] ACPI: Dynamic OEM Table Load:
[    0.145037] ACPI: SSDT 0xFFFF98DECA335A00 000119 (v01 PmRef  ApCst    00003000 INTL 20120913)
[    0.146153] ACPI : EC: EC started
[    0.201451] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.201453] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x38, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.201454] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.201455] ACPI: Interpreter enabled
[    0.201487] ACPI: (supports S0 S4 S5)
[    0.201488] ACPI: Using IOAPIC for interrupt routing
[    0.201522] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.203213] ACPI: Power Resource [PRWF] (on)
[    0.293325] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.294059] ACPI: Power Resource [CAMP] (on)
[    0.314503] ACPI: Power Resource [PAUD] (on)
[    0.317052] ACPI: Power Resource [TPWR] (on)
[    0.378984] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.378989] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.379535] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.379992] PCI host bridge to bus 0000:00
[    0.379994] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.379996] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.379997] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.379998] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.380000] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.380001] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.380002] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.380003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.380004] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.380005] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.380006] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.380007] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.380009] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.380010] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.380011] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.380012] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.380013] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.380014] pci_bus 0000:00: root bus resource [mem 0xaf200000-0xfeafffff window]
[    0.380016] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.380024] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    0.380163] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    0.380175] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.380182] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.380187] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.380307] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    0.380315] pci 0000:00:03.0: reg 0x10: [mem 0xc0614000-0xc0617fff 64bit]
[    0.380454] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    0.380471] pci 0000:00:14.0: reg 0x10: [mem 0xc0600000-0xc060ffff 64bit]
[    0.380533] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.380598] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.380642] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    0.380661] pci 0000:00:16.0: reg 0x10: [mem 0xc061c000-0xc061c01f 64bit]
[    0.380733] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.380848] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    0.380862] pci 0000:00:1b.0: reg 0x10: [mem 0xc0610000-0xc0613fff 64bit]
[    0.380922] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.380989] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.381031] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[    0.381109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.381281] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    0.381496] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    0.381509] pci 0000:00:1f.2: reg 0x10: [io  0x30b0-0x30b7]
[    0.381516] pci 0000:00:1f.2: reg 0x14: [io  0x30a0-0x30a3]
[    0.381522] pci 0000:00:1f.2: reg 0x18: [io  0x3090-0x3097]
[    0.381529] pci 0000:00:1f.2: reg 0x1c: [io  0x3080-0x3083]
[    0.381536] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.381543] pci 0000:00:1f.2: reg 0x24: [mem 0xc061a000-0xc061a7ff]
[    0.381580] pci 0000:00:1f.2: PME# supported from D3hot
[    0.381679] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    0.381693] pci 0000:00:1f.3: reg 0x10: [mem 0xc0619000-0xc06190ff 64bit]
[    0.381713] pci 0000:00:1f.3: reg 0x20: [io  0x3040-0x305f]
[    0.381987] pci 0000:01:00.0: [11ab:2b38] type 00 class 0x020000
[    0.382014] pci 0000:01:00.0: reg 0x10: [mem 0xc0500000-0xc05fffff 64bit pref]
[    0.382032] pci 0000:01:00.0: reg 0x18: [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.382153] pci 0000:01:00.0: supports D1 D2
[    0.382154] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.382232] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.393376] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.393381] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc05fffff]
[    0.427398] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427454] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427563] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427670] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427723] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.427781] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.428117] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.428442] ACPI : EC: event unblocked
[    0.428449] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x38, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.428451] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.435389] SCSI subsystem initialized
[    0.435434] libata version 3.00 loaded.
[    0.435465] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.435466] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.435468] vgaarb: loaded
[    0.435469] vgaarb: bridge control possible 0000:00:02.0
[    0.435491] ACPI: bus type USB registered
[    0.435508] usbcore: registered new interface driver usbfs
[    0.435523] usbcore: registered new interface driver hub
[    0.435539] usbcore: registered new device driver usb
[    0.435620] Registered efivars operations
[    0.442172] PCI: Using ACPI for IRQ routing
[    0.448067] PCI: pci_cache_line_size set to 64 bytes
[    0.448182] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.448183] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.448184] e820: reserve RAM buffer [mem 0xa79d0018-0xa7ffffff]
[    0.448185] e820: reserve RAM buffer [mem 0xaa379000-0xabffffff]
[    0.448186] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
[    0.448293] NetLabel: Initializing
[    0.448294] NetLabel:  domain hash size = 128
[    0.448295] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.448309] NetLabel:  unlabeled traffic allowed by default
[    0.448401] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.448407] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.450432] clocksource: Switched to clocksource hpet
[    0.458909] VFS: Disk quotas dquot_6.6.0
[    0.458928] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.459037] AppArmor: AppArmor Filesystem Enabled
[    0.459093] pnp: PnP ACPI init
[    0.459451] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.459454] system 00:00: [io  0xffff] has been reserved
[    0.459455] system 00:00: [io  0xffff] has been reserved
[    0.459457] system 00:00: [io  0xffff] has been reserved
[    0.459461] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.459463] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.459467] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.459523] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.459579] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.459582] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.461223] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.461225] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.461227] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.461228] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.461230] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[    0.461231] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.461233] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.461235] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.461236] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.461238] system 00:03: [mem 0xaf210000-0xaf21ffff] has been reserved
[    0.461240] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.461613] system 00:04: [mem 0xfe104000-0xfe104fff] has been reserved
[    0.461615] system 00:04: [mem 0xfe106000-0xfe106fff] has been reserved
[    0.461617] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.462339] pnp: PnP ACPI: found 5 devices
[    0.468721] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.468738] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.468746] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc05fffff]
[    0.468755] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.468756] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.468758] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.468759] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.468760] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.468761] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.468763] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.468764] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.468765] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.468767] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.468768] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.468769] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.468770] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.468771] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.468772] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.468774] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.468775] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.468776] pci_bus 0000:00: resource 21 [mem 0xaf200000-0xfeafffff window]
[    0.468778] pci_bus 0000:01: resource 1 [mem 0xc0400000-0xc05fffff]
[    0.468915] NET: Registered protocol family 2
[    0.469094] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.469163] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.469230] TCP: Hash tables configured (established 32768 bind 32768)
[    0.469253] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.469267] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.469311] NET: Registered protocol family 1
[    0.469325] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.469654] PCI: CLS 64 bytes, default 64
[    0.469701] Trying to unpack rootfs image as initramfs...
[    7.470571] Freeing initrd memory: 28600K (ffff98ddbe40d000 - ffff98ddbfffb000)
[    7.470602] DMAR: ACPI device "INT33C2:00" under DMAR at fed91000 as 00:15.1
[    7.470606] DMAR: ACPI device "INT33C3:00" under DMAR at fed91000 as 00:15.2
[    7.470617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    7.470619] software IO TLB [mem 0xa39d0000-0xa79d0000] (64MB) mapped at [ffff98de239d0000-ffff98de279cffff]
[    7.470907] Scanning for low memory corruption every 60 seconds
[    7.471246] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    7.471271] audit: initializing netlink subsys (disabled)
[    7.471290] audit: type=2000 audit(1487002534.464:1): initialized
[    7.471760] Initialise system trusted keyrings
[    7.471854] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    7.473569] zbud: loaded
[    7.474034] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.474253] fuse init (API version 7.26)
[    7.474394] Allocating IMA blacklist keyring.
[    7.475455] Key type asymmetric registered
[    7.475456] Asymmetric key parser 'x509' registered
[    7.475495] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    7.475528] io scheduler noop registered
[    7.475529] io scheduler deadline registered (default)
[    7.475537] io scheduler cfq registered
[    7.475909] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    7.475911] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    7.475915] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    7.475923] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    7.475928] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    7.475966] efifb: probing for efifb
[    7.475980] efifb: framebuffer at 0xb0000000, using 1876k, total 1875k
[    7.475981] efifb: mode is 800x600x32, linelength=3200, pages=1
[    7.475981] efifb: scrolling: redraw
[    7.475983] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    7.477246] Console: switching to colour frame buffer device 100x37
[    7.478436] fb0: EFI VGA frame buffer device
[    7.478444] intel_idle: MWAIT substates: 0x11142120
[    7.478445] intel_idle: v0.4.1 model 0x45
[    7.478675] intel_idle: lapic_timer_reliable_states 0xffffffff
[    7.479255] ACPI: AC Adapter [AC0] (on-line)
[    7.479348] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/PNP0C0D:00/input/input0
[    7.479362] ACPI: Lid Switch [LID0]
[    7.483369] [Firmware Bug]: Invalid critical threshold (98)
[    7.485479] thermal LNXTHERM:00: registered as thermal_zone0
[    7.485481] ACPI: Thermal Zone [TZ0] (-267 C)
[    7.485563] GHES: HEST is not enabled!
[    7.485760] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    7.487803] Linux agpgart interface v0.103
[    7.487896] tpm_tis MSFT0101:00: [Firmware Bug]: TPM2 ACPI table does not define a memory resource
[    7.487941] tpm_tis: probe of MSFT0101:00 failed with error -22
[    7.490966] brd: module loaded
[    7.492259] loop: module loaded
[    7.492439] libphy: Fixed MDIO Bus: probed
[    7.492440] tun: Universal TUN/TAP device driver, 1.6
[    7.492440] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.492478] PPP generic driver version 2.4.2
[    7.492525] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.492528] ehci-pci: EHCI PCI platform driver
[    7.492538] ehci-platform: EHCI generic platform driver
[    7.492549] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.492550] ohci-pci: OHCI PCI platform driver
[    7.492558] ohci-platform: OHCI generic platform driver
[    7.492566] uhci_hcd: USB Universal Host Controller Interface driver
[    7.492734] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.492739] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    7.493813] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    7.493817] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    7.493914] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.493915] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.493916] usb usb1: Product: xHCI Host Controller
[    7.493918] usb usb1: Manufacturer: Linux 4.9.0-15-generic xhci-hcd
[    7.493919] usb usb1: SerialNumber: 0000:00:14.0
[    7.494046] hub 1-0:1.0: USB hub found
[    7.494058] hub 1-0:1.0: 9 ports detected
[    7.495734] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    7.495738] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    7.495769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    7.495770] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.495772] usb usb2: Product: xHCI Host Controller
[    7.495773] usb usb2: Manufacturer: Linux 4.9.0-15-generic xhci-hcd
[    7.495774] usb usb2: SerialNumber: 0000:00:14.0
[    7.495887] hub 2-0:1.0: USB hub found
[    7.495895] hub 2-0:1.0: 4 ports detected
[    7.496289] usb: port power management may be unreliable
[    7.496766] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    7.534060] random: fast init done
[    7.540861] ACPI: Battery Slot [BAT0] (battery present)
[    8.031068] i8042: Can't read CTR while initializing i8042
[    8.031118] i8042: probe of i8042 failed with error -5
[    8.031253] mousedev: PS/2 mouse device common for all mice
[    8.031347] rtc_cmos 00:01: RTC can wake from S4
[    8.031484] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    8.031518] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    8.031524] i2c /dev entries driver
[    8.031586] device-mapper: uevent: version 1.0.3
[    8.031656] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    8.031664] intel_pstate: Intel P-state driver initializing
[    8.031815] ledtrig-cpu: registered to indicate activity on CPUs
[    8.031817] EFI Variables Facility v0.08 2004-May-17
[    8.039870] NET: Registered protocol family 10
[    8.040055] NET: Registered protocol family 17
[    8.040060] Key type dns_resolver registered
[    8.040250] microcode: sig=0x40651, pf=0x40, revision=0x1c
[    8.040294] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    8.040552] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
[    8.040568] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
[    8.042285] EFI: Loaded cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to '.builtin_trusted_keys'
[    8.042365] registered taskstats version 1
[    8.042373] Loading compiled-in X.509 certificates
[    8.044197] Loaded X.509 cert 'Build time autogenerated kernel key: 9bc63bee29a2390beb00821d85d1440d7cb2ba20'
[    8.044211] zswap: loaded using pool lzo/zbud
[    8.046403] Key type big_key registered
[    8.047455] Key type trusted registered
[    8.048479] Key type encrypted registered
[    8.048481] AppArmor: AppArmor sha1 policy hashing enabled
[    8.048483] ima: No TPM chip found, activating TPM-bypass!
[    8.048497] evm: HMAC attrs: 0x1
[    8.048789]   Magic number: 5:368:287
[    8.048818] tty tty20: hash matches
[    8.048898] rtc_cmos 00:01: setting system clock to 2017-02-13 16:15:35 UTC (1487002535)
[    8.048941] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    8.048941] EDD information not available.
[    8.050282] Freeing unused kernel memory: 2164K (ffffffff88b9d000 - ffffffff88dba000)
[    8.050283] Write protecting the kernel read-only data: 14336k
[    8.050565] Freeing unused kernel memory: 1312K (ffff98deb48b8000 - ffff98deb4a00000)
[    8.051247] Freeing unused kernel memory: 344K (ffff98deb4daa000 - ffff98deb4e00000)
[    8.056791] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    8.091655] hidraw: raw HID events driver (C) Jiri Kosina
[    8.094100] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    8.098948] sdhci: Secure Digital Host Controller Interface driver
[    8.098950] sdhci: Copyright(c) Pierre Ossman
[    8.108620] ahci 0000:00:1f.2: version 3.0
[    8.110798] [drm] Initialized
[    8.119030] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    8.119032] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    8.126897] scsi host0: ahci
[    8.127229] scsi host1: ahci
[    8.130850] scsi host2: ahci
[    8.130921] ata1: SATA max UDMA/133 abar m2048@0xc061a000 port 0xc061a100 irq 44
[    8.130923] ata2: DUMMY
[    8.130923] ata3: DUMMY
[    8.138443] i915 0000:00:02.0: can't derive routing for PCI INT A
[    8.138445] i915 0000:00:02.0: PCI INT A: not connected
[    8.138567] [drm] Memory usable by graphics device = 2048M
[    8.138568] checking generic (b0000000 1d5000) vs hw (b0000000 10000000)
[    8.138569] fb: switching to inteldrmfb from EFI VGA
[    8.138587] Console: switching to colour dummy device 80x25
[    8.138671] [drm] Replacing VGA console driver
[    8.144639] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    8.144639] [drm] Driver supports precise vblank timestamp query.
[    8.147544] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    8.161295] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.161534] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    8.161593] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    8.164797] fbcon: inteldrmfb (fb0) is primary device
[    8.278885] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    8.430332] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    8.430334] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.430335] usb 1-1: Product: USB2.0 Hub
[    8.430336] usb 1-1: Manufacturer: GenesysLogic
[    8.431658] hub 1-1:1.0: USB hub found
[    8.432963] hub 1-1:1.0: 4 ports detected
[    8.446368] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    8.448859] ata1.00: NCQ Send/Recv Log not supported
[    8.448861] ata1.00: ATA-9: SAMSUNG MZMTE128HMGR-000MV, EXT41M0Q, max UDMA/133
[    8.448863] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    8.449633] ata1.00: NCQ Send/Recv Log not supported
[    8.449706] ata1.00: configured for UDMA/133
[    8.449937] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZMTE128 1M0Q PQ: 0 ANSI: 5
[    8.478912] tsc: Refined TSC clocksource calibration: 2494.225 MHz
[    8.478923] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3ea95b09, max_idle_ns: 440795287034 ns
[    8.491134] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.491172] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    8.491306] sd 0:0:0:0: [sda] Write Protect is off
[    8.491308] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.491369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.493035]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    8.494047] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.543266] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    8.567693] usb 2-1: New USB device found, idVendor=05e3, idProduct=0616
[    8.567695] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.567696] usb 2-1: Product: USB3.0 Hub
[    8.567697] usb 2-1: Manufacturer: GenesysLogic
[    8.570081] hub 2-1:1.0: USB hub found
[    8.570610] hub 2-1:1.0: 4 ports detected
[    8.682923] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    8.825368] usb 1-3: New USB device found, idVendor=045e, idProduct=07dc
[    8.825370] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.825371] usb 1-3: Product: Surface Type Cover
[    8.825372] usb 1-3: Manufacturer: Microsoft
[    8.825373] usb 1-3: SerialNumber: 025581743154
[    8.830263] usbcore: registered new interface driver usbhid
[    8.830263] usbhid: USB HID core driver
[    8.832516] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07DC.0001/input/input2
[    8.891175] microsoft 0003:045E:07DC.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000:00:14.0-3/input0
[    8.902859] usb 1-1.4: new high-speed USB device number 4 using xhci_hcd
[    9.003704] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8152
[    9.003706] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.003707] usb 1-1.4: Product: USB 10/100 LAN
[    9.003708] usb 1-1.4: Manufacturer: Realtek
[    9.003709] usb 1-1.4: SerialNumber: 00E04C360019
[    9.083177] usb 2-1.2: new SuperSpeed USB device number 3 using xhci_hcd
[    9.108617] usb 2-1.2: New USB device found, idVendor=8564, idProduct=1000
[    9.108619] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.108621] usb 2-1.2: Product: Mass Storage Device
[    9.108622] usb 2-1.2: Manufacturer: JetFlash
[    9.108622] usb 2-1.2: SerialNumber: 69YMCH8BYZE4N3YK
[    9.115140] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[    9.115242] scsi host3: usb-storage 2-1.2:1.0
[    9.115304] usbcore: registered new interface driver usb-storage
[    9.116361] usbcore: registered new interface driver uas
[    9.222897] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[    9.376812] usb 1-7: New USB device found, idVendor=045e, idProduct=07be
[    9.376813] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.376815] usb 1-7: Product: Microsoft LifeCam Front
[    9.376816] usb 1-7: Manufacturer: QCM
[    9.474943] Console: switching to colour frame buffer device 270x90
[    9.494908] usb 1-8: new high-speed USB device number 6 using xhci_hcd
[    9.497040] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.503124] clocksource: Switched to clocksource tsc
[    9.656650] usb 1-8: New USB device found, idVendor=045e, idProduct=07bf
[    9.656652] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.656653] usb 1-8: Product: Microsoft LifeCam Rear
[    9.656654] usb 1-8: Manufacturer: QCM
[   10.192723] ISO 9660 Extensions: Microsoft Joliet Level 3
[   10.194652] ISO 9660 Extensions: RRIP_1991A
[   10.242543] ISO 9660 Extensions: Microsoft Joliet Level 3
[   10.242743] ISO 9660 Extensions: RRIP_1991A
[   10.252781] aufs 4.x-rcN-20161010
[   10.461808] scsi 3:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
[   10.462154] sd 3:0:0:0: Attached scsi generic sg1 type 0
[   10.462636] sd 3:0:0:0: [sdb] 30851072 512-byte logical blocks: (15.8 GB/14.7 GiB)
[   10.463051] sd 3:0:0:0: [sdb] Write Protect is off
[   10.463053] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   10.464297] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.471224]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[   10.473415] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   14.301293] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.323704] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   14.323810] systemd[1]: Detected architecture x86-64.
[   14.323991] systemd[1]: Set hostname to <ubuntu>.
[   14.324142] systemd[1]: Initializing machine ID from random generator.
[   14.401406] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   14.401477] systemd[1]: Listening on Journal Socket.
[   14.401507] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   14.401514] systemd[1]: Reached target User and Group Name Lookups.
[   14.401562] systemd[1]: Listening on Journal Audit Socket.
[   14.401599] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   14.475784] lp: driver loaded but no devices found
[   14.496112] ppdev: user-space parallel port driver
[   14.496235] systemd-journald[1104]: Received request to flush runtime journal from PID 1
[   14.725219] input: Surface Pro 3/4 Buttons as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/MSHW0028:00/input/input3
[   14.725263] surface_pro3_button MSHW0028:00: Surface Pro 3/4 Buttons [VGBI]
[   14.775339] dw_dmac INTL9C60:00: can't request region for resource [mem 0x00000000-0x00000fff]
[   14.775352] dw_dmac: probe of INTL9C60:00 failed with error -16
[   14.862202] usbcore: registered new interface driver r8152
[   14.869074] media: Linux media interface: v0.10
[   14.878460] Linux video capture interface: v2.00
[   14.879672] usbcore: registered new interface driver cdc_ether
[   14.906630] uvcvideo: Found UVC 1.50 device Microsoft LifeCam Front (045e:07be)
[   14.909237] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
[   14.909240] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
[   14.909242] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
[   14.909333] input: Microsoft LifeCam Front as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input4
[   14.909419] uvcvideo: Found UVC 1.50 device Microsoft LifeCam Rear (045e:07bf)
[   14.909716] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[   14.909719] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[   14.909721] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[   14.909810] input: Microsoft LifeCam Rear as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input5
[   14.909875] usbcore: registered new interface driver uvcvideo
[   14.909876] USB Video Class driver (1.1.1)
[   14.943307] usb 1-1.4: reset high-speed USB device number 4 using xhci_hcd
[   15.011721] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   15.011723] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   15.011724] RAPL PMU: hw unit of domain package 2^-14 Joules
[   15.011725] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   15.011726] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   15.103778] r8152 1-1.4:1.0 eth0: v1.08.6
[   15.149892] AVX2 version of gcm_enc/dec engaged.
[   15.149893] AES CTR mode by8 optimization enabled
[   15.529694] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.545123] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[   15.545299] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   15.545361] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[   15.574852] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC288: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   15.574855] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   15.574857] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   15.574859] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   15.574860] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   15.574862] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   15.574863] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   15.577591] intel_rapl: Found RAPL domain package
[   15.577594] intel_rapl: Found RAPL domain core
[   15.577595] intel_rapl: Found RAPL domain uncore
[   15.577597] intel_rapl: Found RAPL domain dram
[   15.577610] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   15.586450] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[   15.586760] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[   15.594675] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[   15.594882] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[   15.595276] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[   15.603440] random: crng init done
[   15.810793] mwifiex_pcie 0000:01:00.0: enabling device (0000 -> 0002)
[   15.810963] mwifiex_pcie: try set_consistent_dma_mask(32)
[   15.811010] mwifiex_pcie: PCI memory map Virt0: ffffb31dc1700000 PCI memory map Virt2: ffffb31dc1900000
[   15.811051] mwifiex: rx work enabled, cpus 4
[   16.241302] r8152 1-1.4:1.0 enx00e04c360019: renamed from eth0
[   16.893437] mwifiex_pcie 0000:01:00.0: info: FW download over, size 820212 bytes
[   16.929371] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:63 / ret_size:0
[   16.931194] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:63 / ret_size:0
[   16.933057] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.934840] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.935634] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.936482] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.937261] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.938147] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.939215] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[   16.939847] i2c_hid i2c-MSHW0030:00: error in i2c_hid_init_report size:19 / ret_size:0
[   16.969252] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[   16.971769] input: NTRG0001:01 1B96:1B05 Pen as /devices/pci0000:00/INT33C3:00/i2c-10/i2c-NTRG0001:01/0018:1B96:1B05.0003/input/input11
[   16.971960] input: NTRG0001:01 1B96:1B05 as /devices/pci0000:00/INT33C3:00/i2c-10/i2c-NTRG0001:01/0018:1B96:1B05.0003/input/input12
[   16.972071] hid-multitouch 0018:1B96:1B05.0003: input,hidraw1: I2C HID v1.00 Mouse [NTRG0001:01 1B96:1B05] on i2c-NTRG0001:01
[   17.631292] usb 1-6: new high-speed USB device number 7 using xhci_hcd
[   17.772730] usb 1-6: New USB device found, idVendor=1286, idProduct=204b
[   17.772732] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   17.772734] usb 1-6: Product: Bluetooth and Wireless LAN Composite Device
[   17.772735] usb 1-6: Manufacturer: Marvell
[   17.772736] usb 1-6: SerialNumber: 0000000000000000
[   17.795915] Bluetooth: Core ver 2.22
[   17.795931] NET: Registered protocol family 31
[   17.795932] Bluetooth: HCI device and connection manager initialized
[   17.795935] Bluetooth: HCI socket layer initialized
[   17.795936] Bluetooth: L2CAP socket layer initialized
[   17.795940] Bluetooth: SCO socket layer initialized
[   17.803493] usbcore: registered new interface driver btusb
[   17.873811] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.873813] Bluetooth: BNEP filters: protocol multicast
[   17.873816] Bluetooth: BNEP socket layer initialized
[   17.887390] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[   17.987027] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x242 error, result=0x2
[   17.987032] mwifiex_pcie 0000:01:00.0: mwifiex_process_cmdresp: cmd 0x242 failed during	initialization
[   18.021850] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p77) 
[   18.021851] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (15.68.7.p77) 
[   18.025344] mwifiex_pcie 0000:01:00.0 wlp1s0: renamed from mlan0
[   18.063954] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   18.064038] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   18.069788] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   18.125477] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   22.256501] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   22.377864] Bluetooth: RFCOMM TTY layer initialized
[   22.377871] Bluetooth: RFCOMM socket layer initialized
[   22.377876] Bluetooth: RFCOMM ver 1.11
[   23.434231] ISO 9660 Extensions: Microsoft Joliet Level 3
[   23.437520] EXT4-fs (sdb5): warning: mounting unchecked fs, running e2fsck is recommended
[   23.451642] EXT4-fs (sdb5): mounted filesystem without journal. Opts: (null)
[   23.457944] ISO 9660 Extensions: Microsoft Joliet Level 3
[   23.459094] ISO 9660 Extensions: RRIP_1991A
[   44.670916] ieee80211 phy0: mwifiex_cfg80211_sched_scan_start : Invalid Sched_scan parameters
[   77.671895] ieee80211 phy0: mwifiex_cfg80211_sched_scan_start : Invalid Sched_scan parameters
[  120.661476] ieee80211 phy0: mwifiex_cfg80211_sched_scan_start : Invalid Sched_scan parameters
[  173.688568] ieee80211 phy0: mwifiex_cfg80211_sched_scan_start : Invalid Sched_scan parameters
[  182.656883] usb 2-1.2: USB disconnect, device number 3
[  182.658104] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[  182.658162] sd 3:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[  200.302478] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  201.976100] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[  202.001633] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully
[  202.001647] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  202.452309] systemd[1]: snapd.refresh.timer: Adding 1h 24min 39.242676s random time.
[  202.452315] systemd[1]: snapd.refresh.timer: Adding 5h 3min 21.102188s random time.
[  202.582148] systemd[1]: snapd.refresh.timer: Adding 5h 53min 48.359017s random time.
[  202.582154] systemd[1]: snapd.refresh.timer: Adding 5h 42min 45.776378s random time.
[  328.452957] mwifiex_pcie 0000:01:00.0: info: successfully disconnected from 30:b5:c2:92:b1:8d: reason code 3
[  328.461940] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  329.754552] PM: Syncing filesystems ... done.
[  329.754585] PM: Preparing system for sleep (freeze)
[  329.754944] Freezing user space processes ... (elapsed 0.013 seconds) done.
[  329.768712] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  329.770011] PM: Suspending system (freeze)
[  329.770012] Suspending console(s) (use no_console_suspend to debug)
[  329.770197] mwifiex_pcie 0000:01:00.0: None of the WOWLAN triggers enabled
[  329.819230] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  329.819800] ACPI : EC: event blocked
[  329.821161] sd 0:0:0:0: [sda] Stopping disk
[  331.040057] PM: suspend of devices complete after 1270.086 msecs
[  331.080169] PM: late suspend of devices complete after 40.114 msecs
[  331.080856] ACPI : EC: interrupt blocked
[  331.081537] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  331.120131] PM: noirq suspend of devices complete after 39.934 msecs
[  331.120134] PM: suspend-to-idle
[  365.858992] Suspended for 34.162 seconds
[  365.859036] PM: resume from suspend-to-idle
[  365.859255] ACPI : EC: interrupt unblocked
[  365.990978] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  365.991205] PM: noirq resume of devices complete after 132.137 msecs
[  366.091095] PM: early resume of devices complete after 99.543 msecs
[  366.091376] ACPI : button: The lid device is not compliant to SW_LID.
[  366.091383] ACPI : EC: event unblocked
[  366.095684] sd 0:0:0:0: [sda] Starting disk
[  366.097517] rtc_cmos 00:01: System wakeup disabled by ACPI
[  366.409770] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  366.410599] PM: resume of devices complete after 319.549 msecs
[  366.410812] PM: Finishing wakeup.
[  366.410813] Restarting tasks ... done.
[  366.419901] ata1.00: NCQ Send/Recv Log not supported
[  366.420532] ata1.00: NCQ Send/Recv Log not supported
[  366.420570] ata1.00: configured for UDMA/133
[  366.496986] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  366.529129] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  366.530052] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  366.530137] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  366.536360] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  366.605481] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  368.313815] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  368.342166] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[  368.363886] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully
[  368.364074] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  368.722121] systemd[1]: snapd.refresh.timer: Adding 4h 37min 20.699496s random time.
[  368.722131] systemd[1]: snapd.refresh.timer: Adding 5h 56min 1.620084s random time.
[  368.840694] systemd[1]: snapd.refresh.timer: Adding 4h 43min 13.279851s random time.
[  368.840700] systemd[1]: snapd.refresh.timer: Adding 4h 3min 55.116636s random time.
[  527.642457] usb 1-3: USB disconnect, device number 3
[  527.738695] mwifiex_pcie 0000:01:00.0: info: successfully disconnected from 30:b5:c2:92:b1:8d: reason code 3
[  527.747172] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  528.043083] PM: Syncing filesystems ... done.
[  528.043148] PM: Preparing system for sleep (freeze)
[  528.044874] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  528.047081] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  528.048612] PM: Suspending system (freeze)
[  528.048613] Suspending console(s) (use no_console_suspend to debug)
[  528.048841] mwifiex_pcie 0000:01:00.0: None of the WOWLAN triggers enabled
[  528.090775] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  528.091833] ACPI : EC: event blocked
[  528.092703] sd 0:0:0:0: [sda] Stopping disk
[  528.952006] PM: suspend of devices complete after 903.599 msecs
[  528.992027] PM: late suspend of devices complete after 40.035 msecs
[  528.992715] ACPI : EC: interrupt blocked
[  528.992985] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  529.031967] PM: noirq suspend of devices complete after 39.912 msecs
[  529.031970] PM: suspend-to-idle
[  539.257384] Suspended for 9.447 seconds
[  539.259148] PM: resume from suspend-to-idle
[  539.259256] ACPI : EC: interrupt unblocked
[  539.390972] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  539.391078] PM: noirq resume of devices complete after 131.960 msecs
[  539.491029] PM: early resume of devices complete after 99.652 msecs
[  539.491135] ACPI : EC: event unblocked
[  539.501403] sd 0:0:0:0: [sda] Starting disk
[  539.510984] rtc_cmos 00:01: System wakeup disabled by ACPI
[  539.724716] PM: resume of devices complete after 233.787 msecs
[  539.725113] PM: Finishing wakeup.
[  539.725114] Restarting tasks ... done.
[  539.813486] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  539.815765] ata1.00: NCQ Send/Recv Log not supported
[  539.816473] ata1.00: NCQ Send/Recv Log not supported
[  539.816526] ata1.00: configured for UDMA/133
[  539.831532] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  539.864803] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  539.865812] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  539.865883] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  539.871818] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  539.915269] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  540.154609] usb 1-3: new full-speed USB device number 8 using xhci_hcd
[  540.295772] usb 1-3: New USB device found, idVendor=045e, idProduct=07dc
[  540.295775] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  540.295776] usb 1-3: Product: Surface Type Cover
[  540.295777] usb 1-3: Manufacturer: Microsoft
[  540.295779] usb 1-3: SerialNumber: 025581743154
[  540.299770] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:07DC.0004/input/input14
[  540.358987] microsoft 0003:045E:07DC.0004: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000:00:14.0-3/input0
[  541.621340] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  541.636973] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[  541.658011] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully
[  541.658022] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  542.039028] systemd[1]: snapd.refresh.timer: Adding 15min 20.942302s random time.
[  542.039034] systemd[1]: snapd.refresh.timer: Adding 2h 41min 37.770701s random time.
[  542.170048] systemd[1]: snapd.refresh.timer: Adding 3h 30min 26.756486s random time.
[  542.170054] systemd[1]: snapd.refresh.timer: Adding 57min 38.037478s random time.
[  551.506646] [drm] GPU HANG: ecode 7:0:0x87c3ffff, in compiz [2622], reason: Hang on render ring, action: reset
[  551.506649] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[  551.506650] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[  551.506651] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[  551.506653] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[  551.506654] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[  551.506718] drm/i915: Resetting chip after gpu hang
[  568.530692] mwifiex_pcie 0000:01:00.0: info: successfully disconnected from 30:b5:c2:92:b1:8d: reason code 3
[  568.542576] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  568.763974] PM: Syncing filesystems ... done.
[  568.764036] PM: Preparing system for sleep (freeze)
[  568.764762] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  568.766992] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  568.768333] PM: Suspending system (freeze)
[  568.768335] Suspending console(s) (use no_console_suspend to debug)
[  568.768644] mwifiex_pcie 0000:01:00.0: None of the WOWLAN triggers enabled
[  568.820659] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  568.821289] ACPI : EC: event blocked
[  568.822575] sd 0:0:0:0: [sda] Stopping disk
[  569.711466] PM: suspend of devices complete after 943.289 msecs
[  569.749302] PM: late suspend of devices complete after 37.848 msecs
[  569.750040] ACPI : EC: interrupt blocked
[  569.750564] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[  569.789225] PM: noirq suspend of devices complete after 39.903 msecs
[  569.789227] PM: suspend-to-idle
[  575.951480] Suspended for 6.456 seconds
[  575.951520] PM: resume from suspend-to-idle
[  575.951628] ACPI : EC: interrupt unblocked
[  576.083412] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[  576.083503] PM: noirq resume of devices complete after 132.010 msecs
[  576.183481] PM: early resume of devices complete after 99.689 msecs
[  576.183702] ACPI : EC: event unblocked
[  576.188609] sd 0:0:0:0: [sda] Starting disk
[  576.202522] rtc_cmos 00:01: System wakeup disabled by ACPI
[  576.415538] PM: resume of devices complete after 232.157 msecs
[  576.415879] PM: Finishing wakeup.
[  576.415881] Restarting tasks ... done.
[  576.500714] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  576.502981] ata1.00: NCQ Send/Recv Log not supported
[  576.503632] ata1.00: NCQ Send/Recv Log not supported
[  576.503673] ata1.00: configured for UDMA/133
[  576.518593] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  576.549403] IPv6: ADDRCONF(NETDEV_UP): enx00e04c360019: link is not ready
[  576.550349] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  576.550431] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  576.556343] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  576.611453] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  578.317766] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  578.337131] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[  578.358503] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully
[  578.358514] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  578.712001] systemd[1]: snapd.refresh.timer: Adding 5h 45min 35.301002s random time.
[  578.712006] systemd[1]: snapd.refresh.timer: Adding 1h 54min 2.510167s random time.
[  578.837570] systemd[1]: snapd.refresh.timer: Adding 3h 6min 48.513886s random time.
[  578.837576] systemd[1]: snapd.refresh.timer: Adding 4h 38min 27.706187s random time.
[  588.693882] drm/i915: Resetting chip after gpu hang
[  600.688789] drm/i915: Resetting chip after gpu hang
[  600.941477] mwifiex_pcie 0000:01:00.0: info: successfully disconnected from 30:b5:c2:92:b1:8d: reason code 3
[  600.953002] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  609.093840] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[  609.149393] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[  609.170386] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully
[  609.170722] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[  609.541391] systemd[1]: snapd.refresh.timer: Adding 4h 34min 51.019852s random time.
[  609.541399] systemd[1]: snapd.refresh.timer: Adding 2h 40min 14.812888s random time.
[  609.672898] systemd[1]: snapd.refresh.timer: Adding 17min 45.738393s random time.
[  609.672903] systemd[1]: snapd.refresh.timer: Adding 2h 10min 57.822452s random time.
[ 4231.015983] mwifiex_pcie 0000:01:00.0: info: successfully disconnected from 30:b5:c2:92:b1:8d: reason code 2
[ 4232.762268] mwifiex_pcie 0000:01:00.0: info: trying to associate to 'OpenWrt' bssid 30:b5:c2:92:b1:8d
[ 4232.784337] mwifiex_pcie 0000:01:00.0: info: associated to bssid 30:b5:c2:92:b1:8d successfully