1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191 | smartctl 6.5 2016-01-24 r4214 [i686-linux-4.4.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K320
Device Model: Hitachi HTS543232L9A300
Serial Number: 081219FB2400LECYZL9A
LU WWN Device Id: 5 000cca 564cda198
Firmware Version: FB4OC40C
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Jun 30 14:34:27 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 094 094 062 Pre-fail Always - 1638400
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 3023
5 Reallocated_Sector_Ct 0x0033 097 097 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 069 069 000 Old_age Always - 13910
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2867
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 286
193 Load_Cycle_Count 0x0012 088 088 000 Old_age Always - 122815
194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 (Min/Max 13/65)
196 Reallocated_Event_Count 0x0032 092 092 000 Old_age Always - 831
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 33
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 77 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 77 occurred at disk power-on lifetime: 13883 hours (578 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 67 11 8e 14 ea Error: UNC 103 sectors at LBA = 0x0a148e11 = 169119249
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 d8 a0 8d 14 e0 08 00:42:04.500 READ DMA EXT
25 00 08 98 8d 14 e0 08 00:42:01.200 READ DMA EXT
25 00 80 30 8f 14 e0 08 00:42:01.200 READ DMA EXT
25 00 08 e8 8e 14 e0 08 00:42:01.200 READ DMA EXT
25 00 08 b0 8f 14 e0 08 00:42:01.200 READ DMA EXT
Error 76 occurred at disk power-on lifetime: 13883 hours (578 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 f3 8c 14 ea Error: UNC 5 sectors at LBA = 0x0a148cf3 = 169118963
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 8c 14 e0 08 00:41:50.200 READ DMA EXT
ea 00 00 00 00 00 a0 08 00:41:50.200 FLUSH CACHE EXT
ef 10 02 00 00 00 a0 08 00:41:50.200 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 00:41:50.200 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 00:41:50.200 IDENTIFY DEVICE
Error 75 occurred at disk power-on lifetime: 13883 hours (578 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 f3 8c 14 ea Error: UNC 5 sectors at LBA = 0x0a148cf3 = 169118963
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 f0 8c 14 e0 08 00:41:46.100 READ DMA EXT
35 00 08 c0 69 55 e0 08 00:41:46.100 WRITE DMA EXT
ea 00 00 00 00 00 a0 08 00:41:45.800 FLUSH CACHE EXT
35 00 40 00 c1 ce e0 08 00:41:45.800 WRITE DMA EXT
25 00 08 f8 8c 14 e0 08 00:41:45.800 READ DMA EXT
Error 74 occurred at disk power-on lifetime: 13883 hours (578 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 1d f3 8c 14 ea Error: UNC 29 sectors at LBA = 0x0a148cf3 = 169118963
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 10 8c 14 e0 08 00:41:29.700 READ DMA EXT
35 00 08 38 42 ce e0 08 00:41:29.700 WRITE DMA EXT
35 00 10 30 41 ce e0 08 00:41:29.700 WRITE DMA EXT
35 00 10 10 41 ce e0 08 00:41:29.700 WRITE DMA EXT
35 00 08 10 40 ce e0 08 00:41:29.700 WRITE DMA EXT
Error 73 occurred at disk power-on lifetime: 13883 hours (578 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 81 f7 94 14 ea Error: UNC 129 sectors at LBA = 0x0a1494f7 = 169121015
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 88 f0 94 14 e0 08 00:41:21.500 READ DMA EXT
ef 10 02 00 00 00 a0 08 00:41:21.500 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 08 00:41:21.500 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 08 00:41:21.500 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 08 00:41:21.500 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|