1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204 | smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.6.0-040600rc6-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar 5K750
Device Model: Hitachi HTS547575A9E384
Serial Number: J2540059FDHAUE
LU WWN Device Id: 5 000cca 6dfeff495
Firmware Version: JE4OA50A
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Jun 15 22:01:44 2016 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 194) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 098 062 Pre-fail Always - 0
2 Throughput_Performance 0x0025 198 100 040 Pre-fail Offline - 135
3 Spin_Up_Time 0x0023 232 100 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 4166
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 24 (0 3)
7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 120 100 040 Pre-fail Offline - 32
9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 22788
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2610
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 373722841088
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 85911470125
190 Airflow_Temperature_Cel 0x0022 057 042 045 Old_age Always In_the_past 43 (Min/Max 41/43)
191 G-Sense_Error_Rate 0x0032 059 059 000 Old_age Always - 10741
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8323199
193 Load_Cycle_Count 0x0032 005 005 000 Old_age Always - 950209
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 36 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 36 occurred at disk power-on lifetime: 21873 hours (911 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 00 00 10 71 05 Error: IDNF at LBA = 0x05711000 = 91295744
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 d8 00 20 f9 70 40 00 05:17:13.834 WRITE FPDMA QUEUED
61 28 f0 78 57 45 40 00 05:17:13.493 WRITE FPDMA QUEUED
61 c8 e8 d8 2b c0 40 00 05:17:13.062 WRITE FPDMA QUEUED
61 40 e0 98 26 c0 40 00 05:17:12.981 WRITE FPDMA QUEUED
61 40 d8 58 21 c0 40 00 05:17:12.831 WRITE FPDMA QUEUED
Error 35 occurred at disk power-on lifetime: 21873 hours (911 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 b8 00 10 95 05 Error: IDNF at LBA = 0x05951000 = 93655040
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 58 00 c0 95 40 00 04:41:56.625 WRITE FPDMA QUEUED
61 00 50 00 b8 95 40 00 04:41:56.586 WRITE FPDMA QUEUED
61 38 48 c8 b6 95 40 00 04:41:56.372 WRITE FPDMA QUEUED
61 c8 40 00 b0 95 40 00 04:41:56.232 WRITE FPDMA QUEUED
61 98 38 68 af 95 40 00 04:41:55.998 WRITE FPDMA QUEUED
Error 34 occurred at disk power-on lifetime: 21873 hours (911 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 20 c8 33 c6 05 Error: IDNF at LBA = 0x05c633c8 = 96875464
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 b0 40 38 6f c6 40 00 04:41:34.060 WRITE FPDMA QUEUED
61 40 38 f8 6a c6 40 00 04:41:34.060 WRITE FPDMA QUEUED
61 50 30 a8 65 c6 40 00 04:41:34.060 WRITE FPDMA QUEUED
61 38 28 70 60 c6 40 00 04:41:34.060 WRITE FPDMA QUEUED
61 c0 20 b0 59 c6 40 00 04:41:34.060 WRITE FPDMA QUEUED
Error 33 occurred at disk power-on lifetime: 21873 hours (911 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 98 b8 c4 c4 05 Error: IDNF at LBA = 0x05c4c4b8 = 96781496
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 10 a0 80 6f 70 40 00 04:41:06.060 WRITE FPDMA QUEUED
61 10 98 00 6f 70 40 00 04:41:06.059 WRITE FPDMA QUEUED
61 10 90 80 6e 70 40 00 04:41:06.059 WRITE FPDMA QUEUED
61 10 88 00 58 70 40 00 04:41:06.059 WRITE FPDMA QUEUED
61 18 80 80 33 6f 40 00 04:41:06.059 WRITE FPDMA QUEUED
Error 32 occurred at disk power-on lifetime: 21873 hours (911 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 80 00 e8 93 05 Error: IDNF at LBA = 0x0593e800 = 93579264
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 58 a0 a8 5d 94 40 00 04:40:19.278 WRITE FPDMA QUEUED
61 a8 98 00 58 94 40 00 04:40:19.021 WRITE FPDMA QUEUED
61 20 90 e0 55 94 40 00 04:40:18.874 WRITE FPDMA QUEUED
61 e0 88 00 50 94 40 00 04:40:18.606 WRITE FPDMA QUEUED
61 c0 80 40 4d 94 40 00 04:40:18.604 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 22684 -
# 2 Short offline Completed without error 00% 21840 -
# 3 Short offline Completed without error 00% 18423 -
# 4 Extended offline Completed without error 00% 16715 -
# 5 Extended offline Completed without error 00% 16712 -
# 6 Short offline Completed without error 00% 9676 -
# 7 Short offline Aborted by host 60% 5695 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|