1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.2.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9500325AS
Serial Number: 5VE1KS9S
LU WWN Device Id: 5 000c50 0147e5b10
Firmware Version: 0001BSM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Tue May 3 17:43:24 2016 WEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 139) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 086 086 006 Pre-fail Always - 73807480
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3909
5 Reallocated_Sector_Ct 0x0033 050 050 036 Pre-fail Always - 1036
7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 4297564811
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2103
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 925
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 104
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 12885098499
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 068 042 045 Old_age Always In_the_past 32 (0 7 32 32 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 435
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 3970
194 Temperature_Celsius 0x0022 032 058 000 Old_age Always - 32 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 041 041 000 Old_age Always - 73807480
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 151 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 151 occurred at disk power-on lifetime: 2103 hours (87 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 23 8f 5f 00 Error: UNC at LBA = 0x005f8f23 = 6262563
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 10 1f 8f 5f 40 00 00:01:00.151 READ DMA EXT
25 00 f0 2f 8e 5f 40 00 00:00:40.709 READ DMA EXT
25 00 10 1f 8e 5f 40 00 00:00:39.593 READ DMA EXT
25 00 f0 2f 8d 5f 40 00 00:00:24.087 READ DMA EXT
25 00 10 1f 8d 5f 40 00 00:00:24.085 READ DMA EXT
Error 150 occurred at disk power-on lifetime: 2103 hours (87 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 1f 9c 5f 00 Error: UNC at LBA = 0x005f9c1f = 6265887
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1f 9c 5f 40 00 00:30:10.613 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:07.969 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:05.441 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:02.797 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:00.233 READ DMA EXT
Error 149 occurred at disk power-on lifetime: 2103 hours (87 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 1f 9c 5f 00 Error: UNC at LBA = 0x005f9c1f = 6265887
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1f 9c 5f 40 00 00:30:07.969 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:05.441 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:02.797 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:00.233 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:57.576 READ DMA EXT
Error 148 occurred at disk power-on lifetime: 2103 hours (87 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 1f 9c 5f 00 Error: UNC at LBA = 0x005f9c1f = 6265887
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1f 9c 5f 40 00 00:30:05.441 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:02.797 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:00.233 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:57.576 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:55.028 READ DMA EXT
Error 147 occurred at disk power-on lifetime: 2103 hours (87 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 1f 9c 5f 00 Error: UNC at LBA = 0x005f9c1f = 6265887
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 01 1f 9c 5f 40 00 00:30:02.797 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:30:00.233 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:57.576 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:55.028 READ DMA EXT
25 00 01 1f 9c 5f 40 00 00:29:52.420 READ DMA EXT
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|