1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191 | smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-16-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: MDT MD4000AAJB-00YRA0
Serial Number: MDT-MCAS87782975
LU WWN Device Id: 5 0014ee 2ac6140b1
Firmware Version: 12.01C02
User Capacity: 400,087,375,360 bytes [400 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
Local Time is: Sat Nov 21 22:19:54 2015 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (10980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 129) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x203f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 198 168 021 Pre-fail Always - 5083
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 838
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 4339
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 629
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 123
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 838
194 Temperature_Celsius 0x0022 112 104 000 Old_age Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 199 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 344 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 344 occurred at disk power-on lifetime: 4339 hours (180 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 47 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000047 = 71
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 47 00 00 00 08 00:19:37.653 READ DMA
27 00 00 00 00 00 00 08 00:19:37.653 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 0a 00:19:37.645 IDENTIFY DEVICE
ef 03 42 00 00 00 00 0a 00:19:37.645 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 00 08 00:19:37.645 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 343 occurred at disk power-on lifetime: 4339 hours (180 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 47 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000047 = 71
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 47 00 00 00 08 00:19:34.398 READ DMA
c8 00 08 3f 00 00 00 08 00:19:34.397 READ DMA
25 00 08 5f 88 93 2e 08 00:19:34.397 READ DMA EXT
25 00 08 bf 87 93 2e 08 00:19:34.396 READ DMA EXT
ec 00 01 00 00 00 00 08 00:19:34.391 IDENTIFY DEVICE
Error 342 occurred at disk power-on lifetime: 4339 hours (180 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 47 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000047 = 71
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 47 00 00 00 08 00:19:31.468 READ DMA
27 00 00 00 00 00 00 08 00:19:31.468 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 0a 00:19:31.460 IDENTIFY DEVICE
ef 03 42 00 00 00 00 0a 00:19:31.460 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 00 08 00:19:31.460 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 341 occurred at disk power-on lifetime: 4339 hours (180 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 47 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000047 = 71
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 47 00 00 00 08 00:19:28.205 READ DMA
c8 00 e8 40 01 00 00 08 00:19:28.201 READ DMA
c8 00 78 c0 00 00 00 08 00:19:28.199 READ DMA
c8 00 38 80 00 00 00 08 00:19:28.198 READ DMA
c8 00 30 48 00 00 00 08 00:19:28.187 READ DMA
Error 340 occurred at disk power-on lifetime: 4339 hours (180 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 47 00 00 e0 Error: UNC 1 sectors at LBA = 0x00000047 = 71
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 47 00 00 00 08 00:19:25.259 READ DMA
e5 00 00 00 00 00 00 08 00:19:25.258 CHECK POWER MODE
25 00 08 80 87 93 2e 08 00:19:25.258 READ DMA EXT
27 00 00 00 00 00 00 08 00:19:25.258 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 00 0a 00:19:25.249 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|