1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-65-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar 5K750
Device Model: Hitachi HTS547575A9E384
Serial Number: J2540059FDHAUE
LU WWN Device Id: 5 000cca 6dfeff495
Firmware Version: JE4OA50A
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Tue Sep 29 17:19:57 2015 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 194) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 098 062 Pre-fail Always - 0
2 Throughput_Performance 0x0025 198 100 040 Pre-fail Offline - 135
3 Spin_Up_Time 0x0023 243 100 033 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 3575
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 24 (0 3)
7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 117 100 040 Pre-fail Offline - 33
9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 16728
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2112
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 339357007872
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 38661652512
190 Airflow_Temperature_Cel 0x0022 056 042 045 Old_age Always In_the_past 44 (Min/Max 39/44)
191 G-Sense_Error_Rate 0x0032 063 063 000 Old_age Always - 9694
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3866683
193 Load_Cycle_Count 0x0032 009 009 000 Old_age Always - 917058
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 26 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 26 occurred at disk power-on lifetime: 16707 hours (696 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 20 30 bf 09 Error: WP at LBA = 0x09bf3020 = 163524640
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 18 00 10 ce 40 00 2d+21:03:13.191 WRITE FPDMA QUEUED
61 00 10 00 0c ce 40 00 2d+21:03:12.851 WRITE FPDMA QUEUED
61 00 08 00 08 ce 40 00 2d+21:03:12.671 WRITE FPDMA QUEUED
61 00 00 00 04 ce 40 00 2d+21:03:12.671 WRITE FPDMA QUEUED
61 00 f0 00 00 ce 40 00 2d+21:03:12.609 WRITE FPDMA QUEUED
Error 25 occurred at disk power-on lifetime: 16707 hours (696 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 08 80 f7 2d 07 Error: UNC at LBA = 0x072df780 = 120452992
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 d0 a0 d0 2b 40 00 2d+21:02:24.325 READ FPDMA QUEUED
61 00 c8 00 69 b7 40 00 2d+21:02:24.242 WRITE FPDMA QUEUED
61 00 c0 00 65 b7 40 00 2d+21:02:24.241 WRITE FPDMA QUEUED
61 00 b8 00 61 b7 40 00 2d+21:02:24.203 WRITE FPDMA QUEUED
61 00 b0 00 5d b7 40 00 2d+21:02:24.010 WRITE FPDMA QUEUED
Error 24 occurred at disk power-on lifetime: 16461 hours (685 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 58 30 ff 0a Error: WP at LBA = 0x0aff3058 = 184496216
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 00 2c 2b 40 00 1d+15:20:01.827 WRITE FPDMA QUEUED
61 00 08 00 28 2b 40 00 1d+15:20:01.645 WRITE FPDMA QUEUED
61 00 00 00 24 2b 40 00 1d+15:20:01.561 WRITE FPDMA QUEUED
61 00 f0 00 20 2b 40 00 1d+15:20:01.334 WRITE FPDMA QUEUED
61 00 e8 00 1c 2b 40 00 1d+15:20:01.151 WRITE FPDMA QUEUED
Error 23 occurred at disk power-on lifetime: 16461 hours (685 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 70 7d 84 01 Error: WP at LBA = 0x01847d70 = 25460080
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 00 00 44 0b 40 00 1d+15:17:45.219 WRITE FPDMA QUEUED
61 00 f0 00 40 0b 40 00 1d+15:17:45.004 WRITE FPDMA QUEUED
61 00 e8 00 3c 0b 40 00 1d+15:17:44.919 WRITE FPDMA QUEUED
61 00 e0 00 38 0b 40 00 1d+15:17:44.915 WRITE FPDMA QUEUED
61 00 d8 00 34 0b 40 00 1d+15:17:44.877 WRITE FPDMA QUEUED
Error 22 occurred at disk power-on lifetime: 16461 hours (685 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 10 28 33 aa 04 Error: WP at LBA = 0x04aa3328 = 78263080
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 b8 00 54 ea 40 00 1d+15:16:01.828 WRITE FPDMA QUEUED
61 00 b0 00 50 ea 40 00 1d+15:16:01.700 WRITE FPDMA QUEUED
61 00 a8 00 4c ea 40 00 1d+15:16:01.660 WRITE FPDMA QUEUED
61 00 a0 00 48 ea 40 00 1d+15:16:01.654 WRITE FPDMA QUEUED
61 00 98 00 44 ea 40 00 1d+15:16:01.625 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 16715 -
# 2 Extended offline Completed without error 00% 16712 -
# 3 Short offline Completed without error 00% 9676 -
# 4 Short offline Aborted by host 60% 5695 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|