alan@deep-thought:~$ adb shell
~ # cat /proc/last_kmsg 
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.0-5-flo (buildd@kishi14) (gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu2) ) #1-Ubuntu SMP PREEMPT Thu Sep 3 14:21:37 UTC 2015
[    0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] Machine: QCT APQ8064 FLO
[    0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space
[    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
[    0.000000] Initialized persistent memory from 88d00000-88dfffff
[    0.000000] cma: CMA: reserved 16 MiB at af800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
[    0.000000]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
[    0.000000] allocating 44236800 bytes at c2a39000 (82c39000 physical) for fb
[    0.000000] PERCPU: Embedded 9 pages/cpu @c546c000 s15680 r8192 d12992 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 478211
[    0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=0583a679 bootreason=Reboot fuse_info=Y ddr_vendor=hynix androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.04
[    0.000000] HW Revision: ASUSTek input rev_e 
[    0.000000] HW Revision: ASUSTek matched rev_e 
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 140MB 58MB 4MB 7MB 254MB 1420MB = 1883MB total
[    0.000000] Memory: 1826288k/1946096k available, 102924k reserved, 1275900K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0e4c99c   (14611 kB)
[    0.000000]       .init : 0xc0f00000 - 0xc1003d40   (1040 kB)
[    0.000000]       .data : 0xc1004000 - 0xc1143d60   (1280 kB)
[    0.000000]        .bss : 0xc1143d84 - 0xc1440ee4   (3061 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:1177
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.150238] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67668)
[    0.150299] pid_max: default: 32768 minimum: 301
[    0.150604] Security Framework initialized
[    0.150726] AppArmor: AppArmor initialized
[    0.150756] Yama: becoming mindful.
[    0.150939] Mount-cache hash table entries: 512
[    0.152435] Initializing cgroup subsys debug
[    0.152465] Initializing cgroup subsys cpuacct
[    0.152465] Initializing cgroup subsys freezer
[    0.152557] CPU: Testing write buffer coherency: ok
[    0.152954] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.152984] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
[    0.153076] Setting up static identity map for 0x80b5a498 - 0x80b5a520
[    0.155609] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.157440] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.160400] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.160552] Brought up 4 CPUs
[    0.160614] SMP: Total of 4 processors activated (54.13 BogoMIPS).
[    0.162475] devtmpfs: initialized
[    0.175231] EVM: security.selinux
[    0.175262] EVM: security.SMACK64
[    0.175292] EVM: security.capability
[    0.177276] dummy: 
[    0.178924] NET: Registered protocol family 16
[    0.185760] DMA: preallocated 1792 KiB pool for atomic coherent allocations
[    0.186309] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.190307] MIDR      = 0x511f06f0
[    0.190368] meminfo_init: smem ram ptable found: ver: 0 len: 5
[    0.190429] Found 1 memory banks grouped into 8 memory regions
[    0.190826] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
[    0.192047] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
[    0.192077]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
[    0.192199] msm_rpm_init: RPM firmware 3.0.16842936
[    0.212799] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212829] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212829] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212860] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212890] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212921] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212921] msm_rpm_get_status(): Status id 433 not defined for target
[    0.212951] msm_rpm_get_status(): Status id 433 not defined for target
[    0.228881] ASUSTek: Bypassing PCB_ID3
[    0.228942] ASUSTek: PCBID=141
[    0.230010] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
[    0.230285] pm8921_probe: PMIC revision 1: F4
[    0.230285] pm8921_probe: PMIC revision 2: 06
[    0.230316] pm8921_probe: PMIC version: PM8921 rev 3.0
[    0.230346] pm8921_probe: PMIC Restart Reason: Triggered from CBL (external charger)
[    0.231781] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
[    0.232299] pm_gpio_probe: OK: base=152, ngpio=44
[    0.232604] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
[    0.232696] pm8xxx_mpp_probe: OK: base=196, ngpio=12
[    0.234527] pm8821_probe: PMIC revision 1: PM8821 rev F3
[    0.234558] pm8821_probe: PMIC revision 2: PM8821 rev 0B
[    0.234588] pm8821_probe: PMIC version: PM8821 ver 2.1
[    0.235290] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
[    0.235321] pm8xxx_mpp_probe: OK: base=208, ngpio=4
[    0.235656] gpio_vreg_probe: gpio_label required.
[    0.235687] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
[    0.236907] saw_probe: id=0, name=8921_s5
[    0.237243] saw_probe: id=1, name=8921_s6
[    0.237609] saw_probe: id=2, name=8821_s0
[    0.238006] saw_probe: id=3, name=8821_s1
[    0.246063] Sensors:DSPS: initial dsps.
[    0.247070] [ELAN] Touch dirver register
[    0.247467] persistent_ram: found existing buffer, size 42381, start 42381
[    0.380279] console [ram-1] enabled
[    0.380920] apq8064_init_fb: lcd_type=0
[    0.381134] apq8064_init_fb: register mipi_JDI_panel_device
[    0.382537] msm_gpiomux_install: write failure: -22
[    0.382629] msm_gpiomux_install: write failure: -22
[    0.382812] msm_gpiomux_install: write failure: -22
[    0.382934] msm_gpiomux_install: write failure: -22
[    0.383026] msm_gpiomux_install: write failure: -22
[    0.383209] msm_gpiomux_install: write failure: -22
[    0.384124] Registering gpio keys
[    0.384307] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC
[    0.384552] 8921_l17: Failed to create debugfs directory
[    0.386535] ------------[ cut here ]------------
[    0.386657] WARNING: at /build/linux-flo-iEq0Rz/linux-flo-3.4.0/arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x104()
[    0.386871] Modules linked in:
[    0.387084] [<c00151b0>] (unwind_backtrace+0x0/0x11c) from [<c0079de8>] (warn_slowpath_common+0x4c/0x64)
[    0.387298] [<c0079de8>] (warn_slowpath_common+0x4c/0x64) from [<c0079e18>] (warn_slowpath_null+0x18/0x1c)
[    0.387481] [<c0079e18>] (warn_slowpath_null+0x18/0x1c) from [<c0f0c13c>] (subsys_restart_init+0xd8/0x104)
[    0.387695] [<c0f0c13c>] (subsys_restart_init+0xd8/0x104) from [<c000871c>] (do_one_initcall+0x90/0x160)
[    0.387878] [<c000871c>] (do_one_initcall+0x90/0x160) from [<c0f00a24>] (kernel_init+0xe8/0x1a4)
[    0.388092] [<c0f00a24>] (kernel_init+0xe8/0x1a4) from [<c000f894>] (kernel_thread_exit+0x0/0x8)
[    0.388244] ---[ end trace cc31ec72069605f0 ]---
[    0.392669] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
[    0.392791] sps:BAM 0x12244000 is registered.
[    0.393463] sps:sps is ready.
[    0.424896] bio: create slab <bio-0> at 0
[    0.425781] vgaarb: loaded
[    0.426239] ION heap vmalloc created
[    0.426361] ION heap mm created at a0000000 with size 5c00000
[    0.426483] ION heap mm_fw created at 9fe00000 with size 1e0000
[    0.426666] ION heap mfc created at a5c00000 with size 2000
[    0.426818] ION heap iommu created
[    0.427032] ION heap qsecom created at fea07000 with size 780000
[    0.427154] ION heap audio created at ff187000 with size 4cf000
[    0.428527] pm8xxx_pwm_probe: OK
[    0.429351] SCSI subsystem initialized
[    0.429809] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
[    0.429992] sps:BAM 0x28084000 is registered.
[    0.433868] usbcore: registered new interface driver usbfs
[    0.434265] usbcore: registered new interface driver hub
[    0.434509] usbcore: registered new device driver usb
[    0.434936] Linux media interface: v0.10
[    0.435089] Linux video capture interface: v2.00
[    0.436309] apq8064_pm8921_pwm_init+
[    0.436553] apq8064_pm8921_pwm_init-
[    0.437438] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
[    0.437744] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
[    0.437988] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
[    0.438262] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
[    0.438568] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
[    0.438812] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
[    0.439086] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
[    0.439331] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
[    0.439636] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
[    0.439941] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
[    0.440185] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
[    0.440521] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
[    0.441162] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
[    0.441406] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
[    0.441741] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
[    0.442016] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
[    0.442352] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
[    0.442687] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
[    0.442962] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
[    0.443267] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
[    0.443511] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
[    0.443817] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
[    0.444183] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
[    0.444427] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
[    0.444763] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
[    0.445098] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
[    0.445404] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
[    0.445800] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
[    0.446136] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
[    0.446472] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
[    0.446777] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
[    0.447143] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
[    0.447540] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
[    0.447784] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
[    0.448089] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
[    0.448394] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.449432] cfg80211: Calling CRDA to update world regulatory domain
[    0.449645] cfg80211: World regulatory domain updated:
[    0.449737] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    0.449920] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.450103] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.450225] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    0.450408] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.450622] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    0.450866] NetLabel: Initializing
[    0.451049] NetLabel:  domain hash size = 128
[    0.451141] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.451385] NetLabel:  unlabeled traffic allowed by default
[    0.451690] Loading modules backported from Linux version v4.2-rc7-0-g2c6625c
[    0.451873] Backport integrated by backports.git v4.2-rc1-1-3-g0d0798b
[    0.451995] Bluetooth: Core ver 2.20
[    0.452209] NET: Registered protocol family 31
[    0.452331] Bluetooth: HCI device and connection manager initialized
[    0.452453] Bluetooth: HCI socket layer initialized
[    0.452636] Bluetooth: L2CAP socket layer initialized
[    0.452789] Bluetooth: SCO socket layer initialized
[    0.453765] Switching to clocksource gp_timer
[    0.482421] AppArmor: AppArmor Filesystem Enabled
[    0.495117] NET: Registered protocol family 2
[    0.495544] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.496368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.497650] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.498504] TCP: Hash tables configured (established 131072 bind 65536)
[    0.498596] TCP: reno registered
[    0.498809] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.498931] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.499511] NET: Registered protocol family 1
[    0.500213] RPC: Registered named UNIX socket transport module.
[    0.500396] RPC: Registered udp transport module.
[    0.500518] RPC: Registered tcp transport module.
[    0.500671] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.501068] Trying to unpack rootfs image as initramfs...
[    0.778137] Freeing initrd memory: 4320K
[    0.779846] Detected 9 counters on the L2CC PMU.
[    0.781890] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
[    0.783813] pil_riva pil_riva: using secure boot
[    0.786773] pil_dsps pil_dsps: using secure boot
[    0.788330] pil_gss pil_gss: using secure boot
[    0.790771] smd_channel_probe_worker: allocation table not initialized
[    0.801544] msm_dsps driver version 4.03.
[    0.804290] NET: Registered protocol family 27
[    0.810058] dma_test_init, minor number 97
[    0.810729] lpass_fatal_init: lpass SSR driver init'ed.
[    0.811218] wcnss_8960: module initialized
[    0.812042] gss_8064_init: gss fatal driver init'ed.
[    0.812927] acpuclk-8064 acpuclk-8064: SPEED BIN: 14
[    0.813110] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
[    0.815948] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
[    0.816070] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
[    0.816253] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
[    0.816467] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
[    0.819152] msm_rpm_log_probe: OK
[    0.822662] usbcore: registered new interface driver hsic_sysmon
[    0.823394] audit: initializing netlink socket (disabled)
[    0.823547] type=2000 audit(0.800:1): initialized
[    0.825988] highmem bounce pool size: 64 pages
[    0.836822] NFS: Registering the id_resolver key type
[    0.838409] fuse init (API version 7.18)
[    0.838989] msgmni has been set to 1115
[    0.841979] NET: Registered protocol family 38
[    0.842864] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.843109] io scheduler noop registered
[    0.843475] io scheduler deadline registered (default)
[    0.844085] io scheduler cfq registered
[    0.848785] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
[    0.849212] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf00fc000
[    0.849884] mipi_JDI_1080P_pt_init+
[    0.850433] mipi_JDI_lcd_probe+
[    0.850646] mipi_JDI_lcd_probe, hw_revision=0
[    0.851013] mipi_JDI_lcd_probe, lcd_pwm_type=1
[    0.851776] mipi_JDI_lcd_probe+
[    0.851989] mipi_JDI_lcd_probe, hw_revision=0
[    0.852355] mipi_JDI_lcd_probe, lcd_pwm_type=1
[    0.852600] setting pdata->panel_info.fb_num to 3. type: 9
[    0.867523] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!
[    0.868347] mipi_JDI_lcd_probe-
[    0.868469] mipi_JDI_1080P_pt_init-
[    0.869964] setting pdata->panel_info.fb_num to 1. type: 7
[    0.873291] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
[    0.873840] mdp4_dtv_vsync_init: ndx=0
[    0.874114] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ede6b208
[    0.874450] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
[    0.876342] 
[    0.876342]  msm_vidc_enc: Inside vid_enc_init()
[    0.876953] 
[    0.876953]  msm_vidc_enc: Inside vid_enc_vcd_init()
[    0.878784] msm_serial_hs module loaded
[    0.879241] msm_serial_hsl: detected port #1
[    0.879516] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
[    0.880065] msm_serial_hsl: detected port #0
[    0.880310] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
[    0.880889] msm_serial_hsl: driver initialized
[    0.882720] msm_rotator_probe: rotator_hw_revision=2
[    0.886657] diagchar initialized now
[    0.894042] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[    0.913513] brd: module loaded
[    0.920623] loop: module loaded
[    0.923522] anx7808 init gpio
[    0.994232] sp_tx_hardware_poweron: anx7808 power on
[    0.995086] ANX7808 is found.
[    0.996429] 3.3V output disabled
[    1.054260] sp_tx_hardware_powerdown: anx7808 power down
[    1.054382] SP_TX To System State: 
[    1.054473] STATE_CABLE_PLUG
[    1.055175] tabla-slim tabla-slim: Platform data from board file
[    1.214904] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[    1.218078] tabla2x-slim tabla2x-slim: Platform data from board file
[    1.281372] wcd9xxx_check_codec_type: codec is tabla_codec
[    1.281768] wcd9xxx_check_codec_type: Read codec idbytes & version
[    1.281768] byte_0[00000002] byte_1[00000000] byte_2[00000000]
[    1.281799]  byte_3[00000001] version = 2
[    1.283996] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[    1.284484] i2c-core: driver [tabla-i2c-core] using legacy resume method
[    1.285919] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver flags = 0
[    1.286743] bcm2079x-i2c 0-0077: requesting IRQ 320
[    1.287261] bcm2079x-i2c 0-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
[    1.288482] SCSI Media Changer driver v0.25 
[    1.289733] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
[    1.292419] tun: Universal TUN/TAP device driver, 1.6
[    1.292785] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.293395] rmnet_init: BAM devices[8]
[    1.317962] PPP generic driver version 2.4.2
[    1.318542] PPP BSD Compression module registered
[    1.318786] PPP Deflate Compression module registered
[    1.330169] PPP MPPE Compression module registered
[    1.330444] NET: Registered protocol family 24
[    1.330902] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.331146] CSLIP: code copyright 1989 Regents of the University of California.
[    1.331817] wcnss_wlan probed in built-in mode
[    1.333923] usbcore: registered new interface driver asix
[    1.334564] usbcore: registered new interface driver cdc_ether
[    1.334930] usbcore: registered new interface driver net1080
[    1.335418] usbcore: registered new interface driver cdc_subset
[    1.335754] usbcore: registered new interface driver zaurus
[    1.336517] usbcore: registered new interface driver cdc_ncm
[    1.336822] smb345_probe+
[    1.340698] smb345_probe-
[    1.340850] i2c-core: driver [smb345] using legacy suspend method
[    1.340972] i2c-core: driver [smb345] using legacy resume method
[    1.350158] i2c-core: driver [bq27541-battery] using legacy suspend method
[    1.350616] i2c-core: driver [bq27541-battery] using legacy resume method
[    1.351135] msm_otg msm_otg: msm_otg probe
[    1.351959] msm_otg msm_otg: failed to get phy_clk
[    1.352142] msm_otg msm_otg: OTG regs = f0308000
[    1.355834] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist
[    1.356262] gpio 23 request failed 
[    1.356384] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L
[    1.356719] gpio 77 request failed 
[    1.356933] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H
[    1.357574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.358917] usbcore: registered new interface driver cdc_acm
[    1.359039] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.359222] Initializing USB Mass Storage driver...
[    1.359405] usbcore: registered new interface driver usb-storage
[    1.359619] USB Mass Storage support registered.
[    1.359771] usbcore: registered new interface driver ums-alauda
[    1.360046] usbcore: registered new interface driver ums-cypress
[    1.360229] usbcore: registered new interface driver ums-datafab
[    1.360473] usbcore: registered new interface driver ums-freecom
[    1.360687] usbcore: registered new interface driver ums-isd200
[    1.360931] usbcore: registered new interface driver ums-jumpshot
[    1.361114] usbcore: registered new interface driver ums-karma
[    1.361389] usbcore: registered new interface driver ums-onetouch
[    1.361572] usbcore: registered new interface driver ums-sddr09
[    1.361816] usbcore: registered new interface driver ums-sddr55
[    1.361999] usbcore: registered new interface driver ums-usbat
[    1.362365] usbcore: registered new interface driver usbserial
[    1.362457] usbserial: USB Serial Driver core
[    1.362731] usbcore: registered new interface driver qc_csvt
[    1.362884] USB Serial support registered for qc_csvt
[    1.363128] usbcore: registered new interface driver usb_ehset_test
[    1.363311] usbcore: registered new interface driver diag_bridge
[    1.363769] usbcore: registered new interface driver mdm_bridge
[    1.364715] usbcore: registered new interface driver ks_bridge
[    1.364898] ksb_init: init done
[    1.365356] msm_otg msm_otg: phy_reset: success
[    1.366363] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
[    1.366699] mbim_init: initialize 1 instances
[    1.367034] mbim_init: Initialized 1 ports
[    1.369689] rndis_qc_init: initialize rndis QC instance
[    1.370269] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.370452] android_usb gadget: Number of LUNs=1
[    1.370574]  lun0: LUN: removable file: (no medium)
[    1.371246] android_usb gadget: android_usb ready
[    1.372467] mousedev: PS/2 mouse device common for all mice
[    1.373474] usbcore: registered new interface driver xpad
[    1.373596] [ektf3k]:[elan] elan_ktf3k_ts_init
[    1.373870] [ektf3k]:[ELAN] Start HW reset!
[    1.474822] [usb_otg] switch to peripheral mode by default (boot)
[    1.634796] [ektf3k]:[elan]detect intr=>Old FW
[    1.634979] [ektf3k]:The boot code is old!
[    1.664703] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
[    1.664916] [ektf3k]:[elan] hello packet's rc = 0
[    1.874877] notifying plugin
[    1.876861] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044
[    1.878997] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e
[    1.881134] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2
[    1.883178] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029
[    1.885314] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047
[    1.885467] [ektf3k]:[Elan] Max X=2239, Max Y=1343
[    1.885864] input: elan-touchscreen as /devices/virtual/input/input0
[    1.886352] [ektf3k]:The firmware was version 0xA044 and id:0x3029
[    1.886596] [ektf3k]: /proc/ektf_dbg created
[    1.887176] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
[    1.887573] [ektf3k]:[ELAN]misc_register finished!!
[    1.887695] elan-ktf3k 3-0010: Update power source to 0
[    1.904266] lis3dh_acc accelerometer driver: init
[    1.904418] i2c-core: driver [lis3dh_acc] using legacy suspend method
[    1.904663] i2c-core: driver [lis3dh_acc] using legacy resume method
[    1.905059] ASUSTek: lid_driver_probe
[    1.905426] input: lid_input as /devices/virtual/input/input1
[    1.907592] using rtc device, pm8xxx_rtc, for alarms
[    1.907806] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
[    1.908416] i2c /dev entries driver
[    1.913421] ov5693_init_module:105
[    1.913909] ov5693_init_module:110 rc -19
[    1.947937] gpio 25 VCM_PD(1)
[    1.948089] gpio 31 XSHUTDN(1)
[    2.004638] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
[    2.005523] ========================================================
[    2.005706] bq27541_battery_callback  usb_cable_state = 1
[    2.005828] ========================================================
[    2.006011] battery_callback cable_wake_lock 5 sec...
[    2.006011]  
[    2.006225] elan-ktf3k 3-0010: Update power source to 1
[    2.006713] The USB cable status = CHARGER_SDP
[    2.009887] mi1040_init_module:323
[    2.010375] mi1040_init_module:329 rc -19
[    2.010650] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
[    2.184570] gpio 43 CAM_RST(1)
[    2.244934] mi1040_sensor_match_id +++
[    2.245666] Sensor id: 0x2481
[    2.245788] PMIC gpio 11 CAM_VENDOR_1(1)
[    2.246002] PMIC gpio 10 CAM_VENDOR_0(0)
[    2.246124] PMIC gpio 24 CAM_LENS(1)
[    2.246246] Vendor is A
[    2.246337] mi1040_sensor_match_id ---
[    2.487426] lirc_dev: IR Remote Control driver registered, major 237 
[    2.487548] IR NEC protocol handler initialized
[    2.487731] IR RC5(x) protocol handler initialized
[    2.487854] IR RC6 protocol handler initialized
[    2.488037] IR JVC protocol handler initialized
[    2.488128] IR Sony protocol handler initialized
[    2.488250] IR RC5 (streamzap) protocol handler initialized
[    2.488433] IR SANYO protocol handler initialized
[    2.488525] IR MCE Keyboard/mouse protocol handler initialized
[    2.488708] IR LIRC bridge handler initialized
[    2.489410] gspca_main: v2.14.0 registered
[    2.489990] usbcore: registered new interface driver uvcvideo
[    2.490112] USB Video Class driver (1.1.1)
[    2.492065] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
[    2.493347] CAP1106: [cap1106_init] 
[    2.493530] i2c-core: driver [cap1106] using legacy suspend method
[    2.493713] i2c-core: driver [cap1106] using legacy resume method
[    2.517120] pm8xxx_tm_probe: OK
[    2.518310] pm8xxx_tm_probe: OK
[    2.520172] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    2.522003] cpuidle: using governor ladder
[    2.522247] cpuidle: using governor menu
[    2.523254] mmc0: SDCC Version: 0x06000018
[    2.525360] mmc0: bam physical base=0x12402000
[    2.525482] mmc0: bam virtual base=0xf0334000
[    2.525695] sps:BAM 0x12402000 is registered.
[    2.525817] mmc0: BAM device registered. bam_handle=0xed95b600
[    2.528015] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
[    2.529968] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
[    2.530303] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
[    2.530456] mmc0: No card detect facilities available
[    2.532501] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
[    2.532623] mmc0: Controller capabilities: 0x0000039a
[    2.532806] mmc0: 8 bit data mode enabled
[    2.532928] mmc0: 4 bit data mode disabled
[    2.533020] mmc0: polling status mode disabled
[    2.533233] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
[    2.533325] mmc0: Slot eject status = 0
[    2.533508] mmc0: Power save feature enable = 1
[    2.533630] mmc0: SPS-BAM data transfer mode available
[    2.538513] usbcore: registered new interface driver usbhid
[    2.538635] usbhid: USB HID core driver
[    2.540252] ashmem: initialized
[    2.540924] logger: created 256K log 'log_main'
[    2.541442] logger: created 256K log 'log_events'
[    2.541931] logger: created 256K log 'log_radio'
[    2.542572] logger: created 256K log 'log_system'
[    2.544281] usbcore: registered new interface driver snd-usb-audio
[    2.547149] tabla_probe
[    2.550079] msm_pcm_probe: dev name msm-voip-dsp
[    2.550842] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
[    2.551239] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
[    2.553588] msm_pcm_probe: dev name msm-pcm-dsp
[    2.554565] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
[    2.555358] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
[    2.555725] adding pm_qos request in low latency driver
[    2.555938] done adding pm_qos request in low latency driver
[    2.557922] msm_compr_probe: dev name msm-compr-dsp
[    2.559234] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
[    2.561340] msm8930_audio_init: Not the right machine type
[    2.561553] msm_audio_init: Not the right machine type
[    2.561950] msm_audio_init: Not APQ8064 in I2S mode
[    2.658325] mmc0: new HS200 MMC card at address 0001
[    2.659088] mmcblk0: mmc0:0001 MMC16G 14.4 GiB 
[    2.665893]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
[    2.722473] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
[    2.723632] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
[    2.725036] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
[    2.726226] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
[    2.727386] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
[    2.728515] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
[    2.729919] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
[    2.731048] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
[    2.732086] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
[    2.733520] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
[    2.734802] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
[    2.736053] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
[    2.737152] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
[    2.738525] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
[    2.739654] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
[    2.742004] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
[    2.748291] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
[    2.749450] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
[    2.750396] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
[    2.751556] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
[    2.752593] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
[    2.753570] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
[    2.754425] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
[    2.755554] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
[    2.756469] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
[    2.757629] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
[    2.758666] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
[    2.759674] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
[    2.760589] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
[    2.761596] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
[    2.762603] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
[    2.763793] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
[    2.764770] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
[    2.765930] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
[    2.766784] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
[    2.767730] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
[    2.768646] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
[    2.773162] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input2
[    2.774108] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input3
[    2.784820] headset_init+ #####
[    2.786193] input: h2w button as /devices/virtual/input/input4
[    2.786956] HEADSET: Headset detection mode
[    2.845001] set_hs_micbias badgap status: OFF power down bandgap
[    2.845489] headset_init- #####
[    2.845916] u32 classifier
[    2.846160]     Actions configured
[    2.846527] Netfilter messages via NETLINK v0.30.
[    2.846801] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.848724] ctnetlink v0.93: registering with nfnetlink.
[    2.850189] TCP: cubic registered
[    2.851501] NET: Registered protocol family 10
[    2.858917] Mobile IPv6
[    2.859222] IPv6 over IPv4 tunneling driver
[    2.860748] NET: Registered protocol family 17
[    2.861206] NET: Registered protocol family 15
[    2.861663] L2TP core driver, V2.0
[    2.861907] PPPoL2TP kernel driver, V2.0
[    2.862274] Registering the dns_resolver key type
[    2.862823] Bluetooth: RFCOMM socket layer initialized
[    2.863250] Bluetooth: RFCOMM ver 1.11
[    2.863525] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.863739] Bluetooth: BNEP filters: protocol multicast
[    2.864135] Bluetooth: BNEP socket layer initialized
[    2.864349] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.864807] Bluetooth: HIDP socket layer initialized
[    2.866699] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
[    2.867340] Registering SWP/SWPB emulation handler
[    2.867584] clock_late_init: Removing enables held for handed-off clocks
[    2.875457] MSM Watchdog Initialized
[    2.900451] AppArmor: AppArmor sha1 policy hashing enabled
[    2.901794] input: gpio-keys as /devices/platform/gpio-keys.0/input/input5
[    2.902221] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-09-22 14:45:47 UTC (1442933147)
[    2.902679] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
[    2.902801] Unable to register core for 0
[    2.902893] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
[    2.903259] ALSA device list:
[    2.903350]   #0: apq8064-tabla-snd-card
[    2.904174] Freeing init memory: 1036K
[    2.904235] Write protecting the kernel text section c0008000 - c0dfe000
[    3.713836] initrd: checking filesystem integrity for the userdata partition
[    3.721710] EXT3-fs (mmcblk0p30): error: couldn't mount because of unsupported optional features (40)
[    3.775695] EXT2-fs (mmcblk0p30): error: couldn't mount because of unsupported optional features (40)
[    3.864898] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[    3.969787] initrd: checking filesystem for userdata took (including e2fsck) 0 seconds
[    3.969940] initrd: mounting /dev/mmcblk0p30
[    3.989410] EXT3-fs (mmcblk0p30): error: unrecognized mount option "discard" or missing value
[    4.105865] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    4.108764] EXT4-fs (mmcblk0p30): mounted filesystem with journalled data mode. Opts: discard,data=journal
[    4.112518] initrd: boot mode: ubuntu
[    4.166412] initrd: mounting system.img (user mode)
[    4.195709] initrd: mounting device image as ro
[    4.205413] EXT3-fs (loop1): error: couldn't mount because of unsupported optional features (40)
[    4.295532] EXT2-fs (loop1): error: couldn't mount because of unsupported optional features (40)
[    4.356994] EXT4-fs (loop1): mounted filesystem with ordered data mode. Opts: (null)
[    4.364196] initrd: device is flo
[    5.204681] initrd: checking fstab /root/var/lib/lxc/android/rootfs/fstab* for additional mount points
[    5.256347] initrd: checking mount label cache
[    5.257781] initrd: mounting /dev/disk/by-partlabel/cache as /root/android//cache
[    5.280639] initrd: checking mount label persist
[    5.281982] initrd: mounting /dev/disk/by-partlabel/persist as /root/android//persist
[    5.295928] initrd: checking mount label boot
[    5.297271] initrd: mounting /dev/disk/by-partlabel/boot as /root/android//boot
[    5.311492] initrd: checking mount label recovery
[    5.312805] initrd: mounting /dev/disk/by-partlabel/recovery as /root/android//recovery
[    5.326721] initrd: checking mount label misc
[    5.328033] initrd: mounting /dev/disk/by-partlabel/misc as /root/android//misc
[    5.331512] initrd: mounting /root/var/lib/lxc/android/system.img as /root/android/system
[    5.362854] Adding 32764k swap on /root/userdata/SWAP.img.  Priority:-1 extents:1 across:32764k SS
[    5.922149] init: ureadahead-touch main process (637) terminated with status 1
[  692.875854] msm_otg msm_otg: Failed notifying 0 charger type to PMIC
[  692.879119] msm_otg msm_otg: Failed notifying 0 charger type to PMIC

3 Corrected bytes, 0 unrecoverable blocks
Boot info:
Last boot reason: Reboot