1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194 | smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.19.0-26-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA
Device Model: WDC WD1600AABS-61PRA0
Serial Number: WD-WMAP93104840
LU WWN Device Id: 5 0014ee 0001f454a
Firmware Version: 05.06H05
User Capacity: 160.041.885.696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Sep 10 16:42:37 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4380) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 58) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 158 153 021 Pre-fail Always - 3083
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6046
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 045 045 000 Old_age Always - 40178
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5894
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 1290
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6056
194 Temperature_Celsius 0x0022 118 086 000 Old_age Always - 25
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1619
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 305 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 305 occurred at disk power-on lifetime: 22003 hours (916 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 98 44 61 40 Error: UNC at LBA = 0x00614498 = 6374552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 20 3f 44 61 00 00 07:08:55.138 READ FPDMA QUEUED
60 00 18 3f 43 61 00 00 07:08:55.136 READ FPDMA QUEUED
60 00 00 3f 42 61 00 00 07:08:55.135 READ FPDMA QUEUED
60 00 f8 3f 41 61 00 00 07:08:55.132 READ FPDMA QUEUED
60 00 f0 3f 40 61 00 00 07:08:55.131 READ FPDMA QUEUED
Error 304 occurred at disk power-on lifetime: 21638 hours (901 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 98 44 61 40 Error: UNC at LBA = 0x00614498 = 6374552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 20 08 87 44 61 00 00 03:58:02.000 READ FPDMA QUEUED
61 08 08 57 e0 4b 00 00 03:58:01.997 WRITE FPDMA QUEUED
61 08 08 a7 e1 4b 00 00 03:58:01.993 WRITE FPDMA QUEUED
61 08 08 d7 e1 4b 00 00 03:58:01.992 WRITE FPDMA QUEUED
60 08 08 7f 44 61 00 00 03:58:01.984 READ FPDMA QUEUED
Error 303 occurred at disk power-on lifetime: 21634 hours (901 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 98 44 61 40 Error: UNC at LBA = 0x00614498 = 6374552
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 01 98 44 61 00 00 00:07:32.626 READ VERIFY SECTOR(S) EXT
60 01 08 00 00 00 00 00 00:07:32.625 READ FPDMA QUEUED
42 00 01 97 44 61 00 00 00:07:32.625 READ VERIFY SECTOR(S) EXT
60 01 08 00 00 00 00 00 00:07:32.625 READ FPDMA QUEUED
42 00 02 99 44 61 00 00 00:07:32.608 READ VERIFY SECTOR(S) EXT
Error 302 occurred at disk power-on lifetime: 21634 hours (901 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 97 44 61 40 Error: UNC at LBA = 0x00614497 = 6374551
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 02 97 44 61 00 00 00:07:30.444 READ VERIFY SECTOR(S) EXT
42 00 04 9b 44 61 00 00 00:07:30.428 READ VERIFY SECTOR(S) EXT
60 01 08 d5 3d e7 05 00 00:07:30.394 READ FPDMA QUEUED
42 00 04 97 44 61 00 00 00:07:28.230 READ VERIFY SECTOR(S) EXT
60 01 08 00 00 00 00 00 00:07:28.229 READ FPDMA QUEUED
Error 301 occurred at disk power-on lifetime: 21634 hours (901 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 97 44 61 40 Error: UNC at LBA = 0x00614497 = 6374551
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 04 97 44 61 00 00 00:07:28.230 READ VERIFY SECTOR(S) EXT
60 01 08 00 00 00 00 00 00:07:28.229 READ FPDMA QUEUED
42 00 08 97 44 61 00 00 00:07:26.066 READ VERIFY SECTOR(S) EXT
60 01 08 00 00 00 00 00 00:07:26.066 READ FPDMA QUEUED
42 00 08 8f 44 61 00 00 00:07:26.065 READ VERIFY SECTOR(S) EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 19092 -
# 2 Conveyance offline Completed: read failure 90% 19091 94715144
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|