1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar
Device Model: WDC WD800BB-00JHC0
Serial Number: WD-WMAM9EA67088
Firmware Version: 05.01C05
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-6 (minor revision not indicated)
Local Time is: Fri Aug 21 14:58:37 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 35) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 168 163 021 Pre-fail Always - 2566
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1591
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 051 051 000 Old_age Always - 36435
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1073
194 Temperature_Celsius 0x0022 093 079 000 Old_age Always - 50
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 183 000 Old_age Always - 611
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 45 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 45 occurred at disk power-on lifetime: 34290 hours (1428 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 d3 63 15 f9 Error: UNC 5 sectors at LBA = 0x091563d3 = 152396755
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 63 15 09 59 6d+05:09:12.755 READ DMA
ca 00 08 30 ca 85 04 59 6d+05:09:12.750 WRITE DMA
e7 00 00 87 ae ce 00 59 6d+05:09:12.730 FLUSH CACHE
c8 00 28 60 ae ce 07 59 6d+05:09:12.720 READ DMA
ca 00 e8 48 c9 85 04 59 6d+05:09:12.715 WRITE DMA
Error 44 occurred at disk power-on lifetime: 34290 hours (1428 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 d3 63 15 f9 Error: UNC 5 sectors at LBA = 0x091563d3 = 152396755
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 63 15 09 59 6d+05:09:10.775 READ DMA
c8 00 08 c8 63 15 09 59 6d+05:09:10.775 READ DMA
c8 00 08 c0 63 15 09 59 6d+05:09:10.775 READ DMA
c8 00 08 b8 63 15 09 59 6d+05:09:10.775 READ DMA
c8 00 08 b0 63 15 09 59 6d+05:09:10.775 READ DMA
Error 43 occurred at disk power-on lifetime: 34263 hours (1427 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 d3 63 15 f9 Error: UNC 5 sectors at LBA = 0x091563d3 = 152396755
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 63 15 09 59 5d+01:44:48.435 READ DMA
c8 00 02 fe 07 00 00 59 5d+01:44:48.435 READ DMA
c8 00 08 00 70 15 09 59 5d+01:44:48.430 READ DMA
ec 00 01 00 00 00 00 59 5d+01:44:48.425 IDENTIFY DEVICE
c8 00 08 20 60 15 09 59 5d+01:44:48.420 READ DMA
Error 42 occurred at disk power-on lifetime: 34263 hours (1427 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 d3 63 15 f9 Error: UNC 5 sectors at LBA = 0x091563d3 = 152396755
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 63 15 09 59 5d+01:44:46.305 READ DMA
ec 00 01 00 00 00 00 59 5d+01:44:46.305 IDENTIFY DEVICE
f8 00 00 00 00 00 00 59 5d+01:44:46.305 READ NATIVE MAX ADDRESS [OBS-ACS-3]
ec 00 00 00 00 00 00 59 5d+01:44:46.295 IDENTIFY DEVICE
ef 03 45 00 00 00 00 59 5d+01:44:46.295 SET FEATURES [Set transfer mode]
Error 41 occurred at disk power-on lifetime: 34263 hours (1427 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 d3 63 15 f9 Error: UNC 5 sectors at LBA = 0x091563d3 = 152396755
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d0 63 15 09 59 5d+01:44:43.750 READ DMA
f8 00 00 00 00 00 00 59 5d+01:44:43.750 READ NATIVE MAX ADDRESS [OBS-ACS-3]
ec 00 00 00 00 00 00 59 5d+01:44:43.745 IDENTIFY DEVICE
ef 03 45 00 00 00 00 59 5d+01:44:43.745 SET FEATURES [Set transfer mode]
f8 00 00 00 00 00 00 59 5d+01:44:43.730 READ NATIVE MAX ADDRESS [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 35978 -
# 2 Extended offline Completed: read failure 90% 34037 152396557
# 3 Extended offline Completed: read failure 90% 34037 152396557
# 4 Extended offline Completed without error 00% 14458 -
2 of 2 failed self-tests are outdated by newer successful extended offline self-test # 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|