1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-57-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-1CH164
Serial Number: W2F0WE27
LU WWN Device Id: 5 000c50 06083fc89
Firmware Version: CC27
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jul 31 18:26:56 2015 BST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 249) Self-test routine in progress...
90% of test remaining.
Total time to complete Offline
data collection: ( 617) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 272) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 45025624
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 40
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 35264493685
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 17373
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 40
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 076 076 000 Old_age Always - 24
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 078 078 000 Old_age Always - 22
190 Airflow_Temperature_Cel 0x0022 066 059 045 Old_age Always - 34 (Min/Max 25/41)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 24
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 118
194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 099 099 000 Old_age Always - 168
198 Offline_Uncorrectable 0x0010 099 099 000 Old_age Offline - 168
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 17371h+42m+35.844s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 48744816103
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 137816361486
SMART Error Log Version: 1
ATA Error Count: 24 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 24 occurred at disk power-on lifetime: 17280 hours (720 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 10 ff ff ff 4f 00 33d+09:59:45.129 READ FPDMA QUEUED
61 00 01 08 78 4d 40 00 33d+09:59:45.129 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 33d+09:59:45.129 FLUSH CACHE EXT
ef 10 02 00 00 00 a0 00 33d+09:59:45.129 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 33d+09:59:45.129 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 23 occurred at disk power-on lifetime: 17280 hours (720 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 ff ff ff 4f 00 33d+09:59:41.427 READ FPDMA QUEUED
61 00 80 ff ff ff 4f 00 33d+09:59:41.420 WRITE FPDMA QUEUED
60 00 80 ff ff ff 4f 00 33d+09:59:41.402 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 33d+09:59:41.362 FLUSH CACHE EXT
61 00 01 08 80 0c 42 00 33d+09:59:41.362 WRITE FPDMA QUEUED
Error 22 occurred at disk power-on lifetime: 17280 hours (720 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 18 ff ff ff 4f 00 33d+09:59:11.331 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 33d+09:59:11.331 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 33d+09:59:11.330 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 33d+09:59:11.330 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 33d+09:59:11.330 SET FEATURES [Set transfer mode]
Error 21 occurred at disk power-on lifetime: 17280 hours (720 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 20 ff ff ff 4f 00 33d+09:59:07.502 READ FPDMA QUEUED
61 00 00 ff ff ff 4f 00 33d+09:59:07.499 WRITE FPDMA QUEUED
61 00 80 ff ff ff 4f 00 33d+09:59:07.498 WRITE FPDMA QUEUED
61 00 80 ff ff ff 4f 00 33d+09:59:07.496 WRITE FPDMA QUEUED
ea 00 00 00 00 00 a0 00 33d+09:59:07.456 FLUSH CACHE EXT
Error 20 occurred at disk power-on lifetime: 16739 hours (697 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 40 ff ff ff 4f 00 10d+21:11:13.818 WRITE FPDMA QUEUED
61 00 48 ff ff ff 4f 00 10d+21:11:13.818 WRITE FPDMA QUEUED
61 00 38 ff ff ff 4f 00 10d+21:11:13.818 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 10d+21:11:13.818 WRITE FPDMA QUEUED
61 00 10 ff ff ff 4f 00 10d+21:11:13.818 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Self-test routine in progress 90% 17373 -
# 2 Extended offline Aborted by host 90% 17373 -
# 3 Extended offline Completed: read failure 90% 17348 34636264
# 4 Short offline Completed without error 00% 7262 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|