1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211 | eleektro@athena:~$ sudo smartctl /dev/sdd -a
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-58-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 5K3000
Device Model: Hitachi HDS5C3020BLE630
Serial Number: MCE7215P0URHEV
LU WWN Device Id: 5 000cca 37dcbb1bb
Firmware Version: MZ4OAAB0
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5700 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 28 11:31:28 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (19181) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 320) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 142 142 054 Pre-fail Offline - 92
3 Spin_Up_Time 0x0007 253 253 024 Pre-fail Always - 101 (Average 146)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 453
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 138 138 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 16060
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 95
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 470
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 470
194 Temperature_Celsius 0x0002 200 200 000 Old_age Always - 30 (Min/Max 17/53)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 199 199 000 Old_age Always - 5
SMART Error Log Version: 1
ATA Error Count: 5
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 5 occurred at disk power-on lifetime: 16060 hours (669 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 e0 20 38 c0 01 Error: ICRC, ABRT at LBA = 0x01c03820 = 29374496
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 e0 1f 38 c0 41 ff 1d+00:16:17.360 WRITE FPDMA QUEUED
61 00 e8 00 3c c0 40 08 1d+00:16:17.359 WRITE FPDMA QUEUED
61 00 e0 00 40 c0 40 08 1d+00:16:17.359 WRITE FPDMA QUEUED
61 00 d8 00 44 c0 40 08 1d+00:16:17.359 WRITE FPDMA QUEUED
61 00 d0 00 48 c0 40 08 1d+00:16:17.359 WRITE FPDMA QUEUED
Error 4 occurred at disk power-on lifetime: 16038 hours (668 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 a0 60 b3 af 01 Error: ICRC, ABRT at LBA = 0x01afb360 = 28291936
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 a0 5f b3 af 41 ff 01:52:10.038 WRITE FPDMA QUEUED
61 00 90 00 c5 af 40 08 01:52:10.037 WRITE FPDMA QUEUED
61 00 88 00 c1 af 40 08 01:52:10.037 WRITE FPDMA QUEUED
61 00 80 00 bd af 40 08 01:52:10.037 WRITE FPDMA QUEUED
61 00 78 00 b9 af 40 08 01:52:10.037 WRITE FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 15976 hours (665 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 c0 93 a9 01 Error: ICRC, ABRT at LBA = 0x01a993c0 = 27890624
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 40 bf 93 a9 41 ff 00:23:16.137 WRITE FPDMA QUEUED
61 00 c0 00 08 aa 40 08 00:23:16.135 WRITE FPDMA QUEUED
61 00 b8 00 04 aa 40 08 00:23:16.135 WRITE FPDMA QUEUED
61 00 b0 00 00 aa 40 08 00:23:16.135 WRITE FPDMA QUEUED
61 00 a8 00 fc a9 40 08 00:23:16.135 WRITE FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 15976 hours (665 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 10 f0 a7 a9 01 Error: ICRC, ABRT at LBA = 0x01a9a7f0 = 27895792
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 ef a7 a9 41 ff 00:23:14.618 WRITE FPDMA QUEUED
61 00 b8 00 10 aa 40 08 00:23:14.615 WRITE FPDMA QUEUED
61 00 b0 00 0c aa 40 08 00:23:14.613 WRITE FPDMA QUEUED
61 00 a8 00 b4 a9 40 08 00:23:14.609 WRITE FPDMA QUEUED
61 00 a0 00 b8 a9 40 08 00:23:14.609 WRITE FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 15889 hours (662 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 f0 10 e1 e2 00 Error: ICRC, ABRT at LBA = 0x00e2e110 = 14868752
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 f0 0f e1 e2 40 ff 01:18:14.052 WRITE FPDMA QUEUED
61 00 70 00 e4 e2 40 08 01:18:14.051 WRITE FPDMA QUEUED
61 00 68 00 e8 e2 40 08 01:18:14.051 WRITE FPDMA QUEUED
61 00 60 00 ec e2 40 08 01:18:14.051 WRITE FPDMA QUEUED
61 00 58 00 f0 e2 40 08 01:18:14.051 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 15446 -
# 2 Short offline Completed without error 00% 14726 -
# 3 Short offline Completed without error 00% 13982 -
# 4 Short offline Completed without error 00% 13656 -
# 5 Short offline Completed without error 00% 13508 -
# 6 Short offline Completed without error 00% 12840 -
# 7 Short offline Completed without error 00% 12159 -
# 8 Short offline Completed without error 00% 11502 -
# 9 Short offline Completed without error 00% 10873 -
#10 Short offline Completed without error 00% 10128 -
#11 Short offline Completed without error 00% 9408 -
#12 Short offline Completed without error 00% 8664 -
#13 Short offline Completed without error 00% 7920 -
#14 Short offline Completed without error 00% 7361 -
#15 Short offline Completed without error 00% 6691 -
#16 Short offline Completed without error 00% 6104 -
#17 Short offline Completed without error 00% 5361 -
#18 Short offline Completed without error 00% 4830 -
#19 Short offline Completed without error 00% 4116 -
#20 Short offline Completed without error 00% 3372 -
#21 Short offline Completed without error 00% 2652 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|