U-Boot SPL 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29)
reading args
spl_load_image_fat_os: error reading image args, err - -1
reading u-boot.img
reading u-boot.img


U-Boot 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29)

I2C:   ready
DRAM:  512 MiB
NAND:  0 MiB
MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
*** Warning - readenv() failed, using default environment

Net:   <ethaddr> not set. Validating first E-fuse MAC
cpsw, usb_ether
Hit any key to stop autoboot:  0 
gpio: pin 53 (gpio 53) value is 1
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
SD/MMC found on device 0
reading uEnv.txt
294 bytes read in 3 ms (95.7 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
reading snappy-system.txt
1581 bytes read in 6 ms (256.8 KiB/s)
reading b/vmlinuz
6511024 bytes read in 369 ms (16.8 MiB/s)
reading b/initrd.img
13576662 bytes read in 765 ms (16.9 MiB/s)
reading b/dtbs/am335x-boneblack.dtb
30025 bytes read in 9 ms (3.2 MiB/s)
Kernel image @ 0x82000000 [ 0x000000 - 0x6394b0 ]
## Flattened Device Tree blob at 88000000
   Booting using the fdt blob at 0x88000000
   Loading Ramdisk to 9e936000, end 9f6289d6 ... OK
   Using Device Tree in place at 88000000, end 8800a548
WARNING: could not create /chosen FDT_ERR_BADLAYOUT.
ERROR: /chosen node create failed - must RESET the board to recover.
FDT creation failed! hanging...### ERROR ### Please RESET the board ###