vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1d.2
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1d.2
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: uhci bus_master
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=uhci_hcd latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:18 ioport:e480(size=32)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$         *-usb:3
*-usb:3: command not found
ubuntu@ubuntu:~$              description: USB controller
description:: command not found
ubuntu@ubuntu:~$              product: NM10/ICH7 Family USB UHCI Controller #4
product:: command not found
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1d.3
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1d.3
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: uhci bus_master
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=uhci_hcd latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:16 ioport:e400(size=32)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$         *-usb:4
*-usb:4: command not found
ubuntu@ubuntu:~$              description: USB controller
description:: command not found
ubuntu@ubuntu:~$              product: NM10/ICH7 Family USB2 EHCI Controller
product:: command not found
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1d.7
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1d.7
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: pm debug ehci bus_master cap_list
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=ehci-pci latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:23 memory:feaf7c00-feaf7fff
resources:: command not found
ubuntu@ubuntu:~$         *-pci:1
*-pci:1: command not found
ubuntu@ubuntu:~$              description: PCI bridge
description:: command not found
ubuntu@ubuntu:~$              product: 82801 PCI Bridge
product:: command not found
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1e
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1e.0
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: e1
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: pci subtractive_decode bus_master cap_list
capabilities:: command not found
ubuntu@ubuntu:~$         *-isa
*-isa: command not found
ubuntu@ubuntu:~$              description: ISA bridge
description:: command not found
ubuntu@ubuntu:~$              product: 82801GB/GR (ICH7 Family) LPC Interface Bridge
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1f
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1f.0
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: isa bus_master cap_list
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=lpc_ich latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:0
resources:: command not found
ubuntu@ubuntu:~$         *-ide:0
*-ide:0: command not found
ubuntu@ubuntu:~$              description: IDE interface
description:: command not found
ubuntu@ubuntu:~$              product: 82801G (ICH7 Family) IDE Controller
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1f.1
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1f.1
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: ide bus_master
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=ata_piix latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:18 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$         *-ide:1
*-ide:1: command not found
ubuntu@ubuntu:~$              description: IDE interface
description:: command not found
ubuntu@ubuntu:~$              product: NM10/ICH7 Family SATA Controller [IDE mode]
product:: command not found
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1f.2
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1f.2
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 66MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              capabilities: ide pm bus_master cap_list
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: driver=ata_piix latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: irq:19 ioport:e080(size=8) ioport:e000(size=4) ioport:dc00(size=8) ioport:d880(size=4) ioport:d800(size=16)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$         *-serial UNCLAIMED
*-serial: command not found
ubuntu@ubuntu:~$              description: SMBus
description:: command not found
ubuntu@ubuntu:~$              product: NM10/ICH7 Family SMBus Controller
product:: command not found
ubuntu@ubuntu:~$              vendor: Intel Corporation
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 1f.3
physical: command not found
ubuntu@ubuntu:~$              bus info: pci@0000:00:1f.3
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              version: 01
version:: command not found
ubuntu@ubuntu:~$              width: 32 bits
width:: command not found
ubuntu@ubuntu:~$              clock: 33MHz
No command 'clock:' found, did you mean:
 Command 'clock' from package 'xview-clients' (universe)
clock:: command not found
ubuntu@ubuntu:~$              configuration: latency=0
configuration:: command not found
ubuntu@ubuntu:~$              resources: ioport:400(size=32)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$      *-scsi:0
*-scsi:0: command not found
ubuntu@ubuntu:~$           physical id: 1
physical: command not found
ubuntu@ubuntu:~$           logical name: scsi2
logical: command not found
ubuntu@ubuntu:~$           capabilities: emulated
capabilities:: command not found
ubuntu@ubuntu:~$         *-disk
*-disk: command not found
ubuntu@ubuntu:~$              description: ATA Disk
description:: command not found
ubuntu@ubuntu:~$              product: Hitachi HDS72103
product:: command not found
ubuntu@ubuntu:~$              vendor: Hitachi
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.0
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@2:0.0.0
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/sda
logical: command not found
ubuntu@ubuntu:~$              version: A3EA
version:: command not found
ubuntu@ubuntu:~$              serial: JPB440HA2VY0DD
serial:: command not found
ubuntu@ubuntu:~$              size: 298GiB (320GB)
bash: syntax error near unexpected token `('
ubuntu@ubuntu:~$              capabilities: partitioned partitioned:dos
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: ansiversion=5 sectorsize=512 signature=bb29b1fb
configuration:: command not found
ubuntu@ubuntu:~$            *-volume:0
*-volume:0: command not found
ubuntu@ubuntu:~$                 description: Windows NTFS volume
description:: command not found
ubuntu@ubuntu:~$                 physical id: 1
physical: command not found
ubuntu@ubuntu:~$                 bus info: scsi@2:0.0.0,1
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$                 logical name: /dev/sda1
logical: command not found
ubuntu@ubuntu:~$                 version: 3.1
version:: command not found
ubuntu@ubuntu:~$                 serial: cc37-694a
serial:: command not found
ubuntu@ubuntu:~$                 size: 15GiB
No command 'size:' found, did you mean:
 Command 'size' from package 'binutils' (main)
 Command 'size' from package 'binutils-multiarch' (main)
size:: command not found
ubuntu@ubuntu:~$                 capacity: 16GiB
capacity:: command not found
ubuntu@ubuntu:~$                 capabilities: primary ntfs initialized
capabilities:: command not found
ubuntu@ubuntu:~$                 configuration: clustersize=4096 created=2010-07-19 00:20:38 filesystem=ntfs label=PQSERVICE state=clean
configuration:: command not found
ubuntu@ubuntu:~$            *-volume:1
*-volume:1: command not found
ubuntu@ubuntu:~$                 description: Windows NTFS volume
description:: command not found
ubuntu@ubuntu:~$                 physical id: 2
physical: command not found
ubuntu@ubuntu:~$                 bus info: scsi@2:0.0.0,2
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$                 logical name: /dev/sda2
logical: command not found
ubuntu@ubuntu:~$                 version: 3.1
version:: command not found
ubuntu@ubuntu:~$                 serial: 0638-14a8
serial:: command not found
ubuntu@ubuntu:~$                 size: 98MiB
No command 'size:' found, did you mean:
 Command 'size' from package 'binutils-multiarch' (main)
 Command 'size' from package 'binutils' (main)
size:: command not found
ubuntu@ubuntu:~$                 capacity: 100MiB
capacity:: command not found
ubuntu@ubuntu:~$                 capabilities: primary bootable ntfs initializedcapabilities:: command not found
ubuntu@ubuntu:~$                 configuration: clustersize=4096 created=2010-07-19 00:20:40 filesystem=ntfs label=SYSTEM RESERVED state=clean
configuration:: command not found
ubuntu@ubuntu:~$            *-volume:2
*-volume:2: command not found
ubuntu@ubuntu:~$                 description: Windows NTFS volume
description:: command not found
ubuntu@ubuntu:~$                 physical id: 3
physical: command not found
ubuntu@ubuntu:~$                 bus info: scsi@2:0.0.0,3
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$                 logical name: /dev/sda3
logical: command not found
ubuntu@ubuntu:~$                 logical name: /isodevice
logical: command not found
ubuntu@ubuntu:~$                 version: 3.1
version:: command not found
ubuntu@ubuntu:~$                 serial: 8c2c5354-862e-fe4f-90c6-50c7bb512ce8
serial:: command not found
ubuntu@ubuntu:~$                 size: 140GiB
No command 'size:' found, did you mean:
 Command 'size' from package 'binutils' (main)
 Command 'size' from package 'binutils-multiarch' (main)
size:: command not found
ubuntu@ubuntu:~$                 capacity: 140GiB
capacity:: command not found
ubuntu@ubuntu:~$                 capabilities: primary ntfs initialized
capabilities:: command not found
ubuntu@ubuntu:~$                 configuration: clustersize=4096 created=2015-06-03 21:27:01 filesystem=ntfs label=Packard Bell mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted
configuration:: command not found
ubuntu@ubuntu:~$            *-volume:3
*-volume:3: command not found
ubuntu@ubuntu:~$                 description: Windows NTFS volume
description:: command not found
ubuntu@ubuntu:~$                 physical id: 4
physical: command not found
ubuntu@ubuntu:~$                 bus info: scsi@2:0.0.0,4
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$                 version: 3.1
version:: command not found
ubuntu@ubuntu:~$                 serial: 1eff229c-0eb0-0340-b6a8-e8a608bb5099
serial:: command not found
ubuntu@ubuntu:~$                 size: 141GiB
No command 'size:' found, did you mean:
 Command 'size' from package 'binutils-multiarch' (main)
 Command 'size' from package 'binutils' (main)
size:: command not found
ubuntu@ubuntu:~$                 capacity: 141GiB
capacity:: command not found
ubuntu@ubuntu:~$                 capabilities: primary extended partitioned partitioned:extended ntfs initialized
capabilities:: command not found
ubuntu@ubuntu:~$                 configuration: clustersize=4096 created=2010-07-19 00:20:44 filesystem=ntfs label=DATA state=clean
configuration:: command not found
ubuntu@ubuntu:~$               *-logicalvolume:0
*-logicalvolume:0: command not found
ubuntu@ubuntu:~$                    description: Linux filesystem partition
description:: command not found
ubuntu@ubuntu:~$                    physical id: 5
physical: command not found
ubuntu@ubuntu:~$                    logical name: /dev/sda5
logical: command not found
ubuntu@ubuntu:~$                    capacity: 139GiB
capacity:: command not found
ubuntu@ubuntu:~$               *-logicalvolume:1
*-logicalvolume:1: command not found
ubuntu@ubuntu:~$                    description: Linux swap / Solaris partition
description:: command not found
ubuntu@ubuntu:~$                    physical id: 6
physical: command not found
ubuntu@ubuntu:~$                    logical name: /dev/sda6
logical: command not found
ubuntu@ubuntu:~$                    capacity: 2041MiB
capacity:: command not found
ubuntu@ubuntu:~$                    capabilities: nofs
capabilities:: command not found
ubuntu@ubuntu:~$      *-scsi:1
*-scsi:1: command not found
ubuntu@ubuntu:~$           physical id: 2
physical: command not found
ubuntu@ubuntu:~$           logical name: scsi3
logical: command not found
ubuntu@ubuntu:~$           capabilities: emulated
capabilities:: command not found
ubuntu@ubuntu:~$         *-cdrom
*-cdrom: command not found
ubuntu@ubuntu:~$              description: DVD-RAM writer
description:: command not found
ubuntu@ubuntu:~$              product: DVD A  DH16AASH
product:: command not found
ubuntu@ubuntu:~$              vendor: ATAPI
vendor:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.0
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@3:0.0.0
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/cdrom
logical: command not found
ubuntu@ubuntu:~$              logical name: /dev/cdrw
logical: command not found
ubuntu@ubuntu:~$              logical name: /dev/dvd
logical: command not found
ubuntu@ubuntu:~$              logical name: /dev/dvdrw
logical: command not found
ubuntu@ubuntu:~$              logical name: /dev/sr0
logical: command not found
ubuntu@ubuntu:~$              version: SA15
version:: command not found
ubuntu@ubuntu:~$              capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
capabilities:: command not found
ubuntu@ubuntu:~$              configuration: ansiversion=5 status=ready
configuration:: command not found
ubuntu@ubuntu:~$            *-medium
*-medium: command not found
ubuntu@ubuntu:~$                 physical id: 0
physical: command not found
ubuntu@ubuntu:~$                 logical name: /dev/cdrom
logical: command not found
ubuntu@ubuntu:~$      *-scsi:2
*-scsi:2: command not found
ubuntu@ubuntu:~$           physical id: 3
physical: command not found
ubuntu@ubuntu:~$           bus info: usb@1:8
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$           logical name: scsi4
logical: command not found
ubuntu@ubuntu:~$           capabilities: emulated scsi-host
capabilities:: command not found
ubuntu@ubuntu:~$           configuration: driver=usb-storage
configuration:: command not found
ubuntu@ubuntu:~$         *-disk:0
*-disk:0: command not found
ubuntu@ubuntu:~$              description: SCSI Disk
description:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.0
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@4:0.0.0
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/sdb
logical: command not found
ubuntu@ubuntu:~$              configuration: sectorsize=512
configuration:: command not found
ubuntu@ubuntu:~$         *-disk:1
*-disk:1: command not found
ubuntu@ubuntu:~$              description: SCSI Disk
description:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.1
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@4:0.0.1
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/sdc
logical: command not found
ubuntu@ubuntu:~$              configuration: sectorsize=512
configuration:: command not found
ubuntu@ubuntu:~$         *-disk:2
*-disk:2: command not found
ubuntu@ubuntu:~$              description: SCSI Disk
description:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.2
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@4:0.0.2
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/sdd
logical: command not found
ubuntu@ubuntu:~$              configuration: sectorsize=512
configuration:: command not found
ubuntu@ubuntu:~$         *-disk:3
*-disk:3: command not found
ubuntu@ubuntu:~$              description: SCSI Disk
description:: command not found
ubuntu@ubuntu:~$              physical id: 0.0.3
physical: command not found
ubuntu@ubuntu:~$              bus info: scsi@4:0.0.3
The program 'bus' is currently not installed. You can install it by typing:
sudo apt-get install atm-tools
You will have to enable the component called 'universe'
ubuntu@ubuntu:~$              logical name: /dev/sde
logical: command not found
ubuntu@ubuntu:~$              configuration: sectorsize=512
configuration:: command not found
ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ 
ubuntu@ubuntu:~$: command not found
ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ 
ubuntu@ubuntu:~$: command not found
ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ 
ubuntu@ubuntu:~$: command not found
ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ 
ubuntu@ubuntu:~$: command not found
ubuntu@ubuntu:~$