1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1CH166
Serial Number: W1F2BMFS
LU WWN Device Id: 5 000c50 05e489bb4
Firmware Version: CC24
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
Local Time is: Fri Jul 3 20:12:28 2015 CEST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 339) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 076 073 006 Pre-fail Always - 93348348
3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 7
5 Reallocated_Sector_Ct 0x0033 095 095 010 Pre-fail Always - 6864
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 117834656
9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 12957
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 7
183 Runtime_Bad_Block 0x0032 096 096 000 Old_age Always - 4
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 9573
188 Command_Timeout 0x0032 100 098 000 Old_age Always - 4 4 5
189 High_Fly_Writes 0x003a 088 088 000 Old_age Always - 12
190 Airflow_Temperature_Cel 0x0022 051 050 045 Old_age Always - 49 (Min/Max 28/50)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2
193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 10067
194 Temperature_Celsius 0x0022 049 050 000 Old_age Always - 49 (0 26 0 0 0)
197 Current_Pending_Sector 0x0012 067 066 000 Old_age Always - 5472
198 Offline_Uncorrectable 0x0010 067 066 000 Old_age Offline - 5472
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 12731h+14m+29.410s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 66767771237
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3703953211
SMART Error Log Version: 1
ATA Error Count: 9573 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 9573 occurred at disk power-on lifetime: 12957 hours (539 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 44d+22:30:18.305 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:18.305 READ FPDMA QUEUED
61 00 10 ff ff ff 4f 00 44d+22:30:18.305 WRITE FPDMA QUEUED
ef 10 02 00 00 00 a0 00 44d+22:30:18.305 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 44d+22:30:18.304 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 9572 occurred at disk power-on lifetime: 12957 hours (539 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: WP at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 10 ff ff ff 4f 00 44d+22:30:18.005 WRITE FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:15.451 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:15.441 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:15.441 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:15.441 READ FPDMA QUEUED
Error 9571 occurred at disk power-on lifetime: 12957 hours (539 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 44d+22:30:12.472 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:12.472 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:12.472 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:12.472 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:12.472 READ FPDMA QUEUED
Error 9570 occurred at disk power-on lifetime: 12957 hours (539 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 44d+22:30:10.719 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:09.383 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 44d+22:30:09.382 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 44d+22:30:09.382 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 44d+22:30:09.382 IDENTIFY DEVICE
Error 9569 occurred at disk power-on lifetime: 12957 hours (539 days + 21 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 44d+22:30:06.449 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:06.449 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:06.448 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:06.445 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 44d+22:30:06.445 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 9379 -
# 2 Extended offline Completed without error 00% 9362 -
# 3 Extended offline Completed without error 00% 9356 -
# 4 Extended offline Completed without error 00% 9279 -
# 5 Extended offline Completed without error 00% 8896 -
# 6 Extended offline Completed without error 00% 8867 -
# 7 Extended offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|