1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199 | root@fnord:~# sudo smartctl -H /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-41-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
root@fnord:~# sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-41-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.4
Device Model: ST9250827AS
Serial Number: 5RG3A25M
LU WWN Device Id: 5 000c50 00e5f4692
Firmware Version: 3.AAB
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Mon Jun 29 22:50:56 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 92) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3910
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 149
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 132285775
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8481
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3848
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1964
189 High_Fly_Writes 0x003a 088 088 000 Old_age Always - 12
190 Airflow_Temperature_Cel 0x0022 061 048 045 Old_age Always - 39 (Min/Max 11/52)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 190
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 2192
193 Load_Cycle_Count 0x0022 001 001 000 Old_age Always - 335030
194 Temperature_Celsius 0x001a 039 052 000 Old_age Always - 39 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x0012 061 051 000 Old_age Always - 142111613
197 Current_Pending_Sector 0x0010 099 032 000 Old_age Offline - 32
198 Offline_Uncorrectable 0x003e 099 032 000 Old_age Always - 32
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 2
200 Multi_Zone_Error_Rate 0x0032 100 253 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0000 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1966 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1966 occurred at disk power-on lifetime: 8472 hours (353 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 02 48 04 e0 Error: UNC at LBA = 0x00044802 = 280578
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 02 48 04 e0 00 00:07:53.671 READ DMA
c8 00 08 08 08 00 e0 00 00:07:53.660 READ DMA
c8 00 02 48 0a 00 e0 00 00:07:53.660 READ DMA
c8 00 04 4c 0a 00 e0 00 00:07:53.594 READ DMA
c8 00 02 4a 0a 00 e0 00 00:07:53.696 READ DMA
Error 1965 occurred at disk power-on lifetime: 8472 hours (353 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 48 04 e0 Error: UNC at LBA = 0x00044800 = 280576
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 48 04 e0 00 00:07:50.088 READ DMA
ea 00 00 00 00 00 a0 00 00:07:50.087 FLUSH CACHE EXT
ca 00 08 b0 b4 f3 e1 00 00:07:50.087 WRITE DMA
ea 00 00 00 00 00 a0 00 00:07:50.086 FLUSH CACHE EXT
ec 00 00 00 00 00 a0 00 00:07:46.847 IDENTIFY DEVICE
Error 1964 occurred at disk power-on lifetime: 8472 hours (353 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 00 48 04 e0 Error: UNC at LBA = 0x00044800 = 280576
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 00 48 04 e0 00 00:07:46.844 READ DMA
ca 00 08 00 20 47 e3 00 00:07:46.844 WRITE DMA
ca 00 08 00 10 47 e3 00 00:07:46.844 WRITE DMA
ca 00 08 08 b0 6f e0 00 00:07:46.540 WRITE DMA
ca 00 08 08 b0 af e0 00 00:07:46.847 WRITE DMA
Error 1963 occurred at disk power-on lifetime: 8425 hours (351 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6e 39 1c e0 Error: UNC at LBA = 0x001c396e = 1849710
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 6e 39 1c e0 00 01:58:47.451 READ DMA EXT
25 00 08 fe 38 1c e0 00 01:58:47.424 READ DMA EXT
c8 00 04 8f 71 0f e0 00 01:58:47.424 READ DMA
c8 00 01 8f 71 0f e0 00 01:58:47.416 READ DMA
c8 00 01 86 71 0f e0 00 01:58:47.415 READ DMA
Error 1962 occurred at disk power-on lifetime: 8425 hours (351 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6e 39 1c e0 Error: UNC at LBA = 0x001c396e = 1849710
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 6e 39 1c e0 00 01:58:43.767 READ DMA EXT
25 00 08 fe 38 1c e0 00 01:58:43.767 READ DMA EXT
c8 00 04 8f 71 0f e0 00 01:58:43.767 READ DMA
c8 00 01 8f 71 0f e0 00 01:58:43.767 READ DMA
c8 00 01 86 71 0f e0 00 01:58:43.767 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 8481 280578
# 2 Short offline Completed: read failure 90% 8139 484232145
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|