1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-55-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST2000DM001-9YN164
Serial Number: Z1E1P3KY
LU WWN Device Id: 5 000c50 04e9afae6
Firmware Version: CC4H
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jun 25 22:26:56 2015 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 224) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 33982752
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 212
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16664329
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15093
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 908
183 Runtime_Bad_Block 0x0032 098 098 000 Old_age Always - 2
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 081 081 000 Old_age Always - 19
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 060 051 045 Old_age Always - 40 (Min/Max 40/40)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 989
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1394
194 Temperature_Celsius 0x0022 040 049 000 Old_age Always - 40 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 12
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 4641h+87m+15.819s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 232354793055806
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 65949529647820
SMART Error Log Version: 1
ATA Error Count: 20 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 20 occurred at disk power-on lifetime: 3754 hours (156 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 10 00 57 00 Error: WP at LBA = 0x00570010 = 5701648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 08 ff ff ff 4f 00 00:04:57.882 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:04:57.882 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:04:57.882 WRITE FPDMA QUEUED
61 00 10 ff ff ff 4f 00 00:04:57.882 WRITE FPDMA QUEUED
61 00 08 ff ff ff 4f 00 00:04:57.881 WRITE FPDMA QUEUED
Error 19 occurred at disk power-on lifetime: 3754 hours (156 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 10 00 57 00 Error: WP at LBA = 0x00570010 = 5701648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 48 ff ff ff 4f 00 00:04:56.625 WRITE FPDMA QUEUED
60 00 08 10 00 57 40 00 00:04:55.044 READ FPDMA QUEUED
60 00 08 08 00 57 40 00 00:04:55.043 READ FPDMA QUEUED
60 00 08 00 00 57 40 00 00:04:55.043 READ FPDMA QUEUED
60 00 08 f8 ff 56 40 00 00:04:55.041 READ FPDMA QUEUED
Error 18 occurred at disk power-on lifetime: 3754 hours (156 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 10 00 57 00 Error: UNC at LBA = 0x00570010 = 5701648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 78 00 57 40 00 00:04:52.140 READ FPDMA QUEUED
60 00 f8 80 ff 56 40 00 00:04:52.140 READ FPDMA QUEUED
60 00 08 78 ff 56 40 00 00:04:52.140 READ FPDMA QUEUED
60 00 f8 80 fe 56 40 00 00:04:52.140 READ FPDMA QUEUED
60 00 08 78 fe 56 40 00 00:04:52.139 READ FPDMA QUEUED
Error 17 occurred at disk power-on lifetime: 3754 hours (156 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 10 00 57 00 Error: UNC at LBA = 0x00570010 = 5701648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 10 00 57 40 00 00:05:07.537 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:05:07.537 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:05:07.537 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:05:07.537 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:05:07.537 SET FEATURES [Set transfer mode]
Error 16 occurred at disk power-on lifetime: 3754 hours (156 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 10 00 57 00 Error: UNC at LBA = 0x00570010 = 5701648
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 10 00 57 40 00 00:05:04.688 READ FPDMA QUEUED
60 00 18 ff ff ff 4f 00 00:05:04.666 READ FPDMA QUEUED
60 00 10 ff ff ff 4f 00 00:05:04.664 READ FPDMA QUEUED
60 00 a0 ff ff ff 4f 00 00:05:04.648 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 00:05:04.645 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|