1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-51-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3750640AS
Serial Number: 5QD20ZYJ
Firmware Version: 3.AAE
User Capacity: 750,155,292,160 bytes [750 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Fri May 1 20:17:44 2015 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 202) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 103 086 006 Pre-fail Always - 6071011
3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3278
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 259499858
9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 22725
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 137
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 052 032 045 Old_age Always In_the_past 48 (109 223 65 41 0)
194 Temperature_Celsius 0x0022 048 068 000 Old_age Always - 48 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x001a 060 050 000 Old_age Always - 179431207
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 16 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 04:27:37.428 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 ae 5e 54 e0 00 04:27:37.369 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 ae 5e 54 e7 00 04:27:37.145 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 ae 5e 54 e0 00 04:27:37.086 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 ae 5e 54 e7 00 04:27:35.000 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 15 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 04:27:33.019 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 ae 5e 54 e0 00 04:27:33.018 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 ae 5e 54 e7 00 04:27:33.018 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 ef 66 54 e0 00 04:27:33.018 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 01 ef 66 54 e0 00 04:27:35.000 READ MULTIPLE EXT
Error 14 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 04:25:14.528 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 ae 5e 54 e0 00 04:25:14.528 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 ae 5e 54 e7 00 04:25:14.528 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 ae 5e 54 e0 00 04:25:18.947 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 ae 5e 54 e7 00 04:25:18.888 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 13 occurred at disk power-on lifetime: 11908 hours (496 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 04:25:14.528 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 ae 5e 54 e0 00 04:25:14.528 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 ae 5e 54 e7 00 04:25:14.528 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 ef 66 54 e0 00 04:25:14.527 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
29 00 01 ef 66 54 e0 00 04:25:14.527 READ MULTIPLE EXT
Error 12 occurred at disk power-on lifetime: 11904 hours (496 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 ae 5e 54 e7
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
37 00 01 ae 5e 54 e7 00 03:08:45.731 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 00 ae 5e 54 e0 00 03:08:45.506 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 00 ae 5e 54 e7 00 03:08:45.439 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
27 00 01 ae 5e 54 e0 00 03:08:45.297 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
37 00 01 ae 5e 54 e7 00 03:08:45.172 SET NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 7227 -
# 2 Short offline Completed without error 00% 7207 -
# 3 Short offline Completed without error 00% 7185 -
# 4 Short offline Completed without error 00% 7165 -
# 5 Short offline Completed without error 00% 7144 -
# 6 Short offline Completed without error 00% 7123 -
# 7 Short offline Completed without error 00% 7102 -
# 8 Short offline Completed without error 00% 7081 -
# 9 Short offline Completed without error 00% 7047 -
#10 Short offline Completed without error 00% 7026 -
#11 Short offline Completed without error 00% 7008 -
#12 Short offline Completed without error 00% 6984 -
#13 Short offline Completed without error 00% 6962 -
#14 Short offline Completed without error 00% 6942 -
#15 Short offline Completed without error 00% 6921 -
#16 Short offline Completed without error 00% 6900 -
#17 Short offline Completed without error 00% 6882 -
#18 Short offline Completed without error 00% 6858 -
#19 Short offline Completed without error 00% 6837 -
#20 Short offline Completed without error 00% 6817 -
#21 Short offline Completed without error 00% 7240 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|