1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-34-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..55GSX
Device Model: TOSHIBA MK3255GSX
Serial Number: 798JC4WCT
LU WWN Device Id: 5 000039 1e3c020bf
Firmware Version: FG011C
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sun Apr 5 10:45:21 2015 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 123) minutes.
SCT capabilities: (0x0033) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0007 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 100 100 002 Pre-fail Always - 1616
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3303
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 6348
10 Spin_Retry_Count 0x0013 165 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3262
183 Runtime_Bad_Block 0x0022 100 100 001 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
185 Unknown_Attribute 0x0032 100 100 001 Old_age Always - 65535
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 468
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 2
189 High_Fly_Writes 0x003a 100 100 001 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 049 041 045 Old_age Always In_the_past 51 (Min/Max 32/54)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 689
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10616994
193 Load_Cycle_Count 0x0032 093 093 000 Old_age Always - 72093
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 579 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 579 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 c2 3c 77 62 60 Error: UNC at LBA = 0x0062773c = 6453052
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 c8 c0 38 77 62 40 00 00:38:01.065 READ FPDMA QUEUED
61 08 b8 00 08 5e 40 00 00:38:01.065 WRITE FPDMA QUEUED
60 08 b0 70 8d c7 40 00 00:38:01.061 READ FPDMA QUEUED
60 80 a8 18 e4 c0 40 00 00:38:01.043 READ FPDMA QUEUED
60 30 a0 30 ca 8f 40 00 00:38:01.027 READ FPDMA QUEUED
Error 578 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 82 3b 77 62 60 Error: UNC at LBA = 0x0062773b = 6453051
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 c8 80 38 77 62 40 00 00:37:56.740 READ FPDMA QUEUED
60 08 78 00 a4 60 40 00 00:37:56.740 READ FPDMA QUEUED
60 08 70 90 da 64 40 00 00:37:56.740 READ FPDMA QUEUED
60 58 68 58 d3 f2 40 00 00:37:56.740 READ FPDMA QUEUED
ef 02 00 00 00 00 a0 00 00:37:56.740 SET FEATURES [Enable write cache]
Error 577 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 1a 3b 77 62 60 Error: UNC at LBA = 0x0062773b = 6453051
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 48 18 e4 c0 40 00 00:37:52.570 READ FPDMA QUEUED
60 08 40 a0 d3 f2 40 00 00:37:52.570 READ FPDMA QUEUED
60 08 38 c0 d0 c0 40 00 00:37:52.570 READ FPDMA QUEUED
60 58 30 f0 56 c1 40 00 00:37:52.569 READ FPDMA QUEUED
60 08 28 88 d3 f2 40 00 00:37:52.569 READ FPDMA QUEUED
Error 576 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 4a 3b 77 62 60 Error: UNC at LBA = 0x0062773b = 6453051
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 c8 48 38 77 62 40 00 00:37:47.513 READ FPDMA QUEUED
60 08 40 d0 d0 2c 40 00 00:37:47.461 READ FPDMA QUEUED
60 08 38 c8 1e c0 40 00 00:37:47.453 READ FPDMA QUEUED
60 08 30 d0 1e c0 40 00 00:37:47.452 READ FPDMA QUEUED
60 08 28 d8 1e c0 40 00 00:37:47.452 READ FPDMA QUEUED
Error 575 occurred at disk power-on lifetime: 5601 hours (233 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 92 3b 77 62 60 Error: UNC at LBA = 0x0062773b = 6453051
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 90 38 77 62 40 00 00:37:43.194 READ FPDMA QUEUED
60 80 88 98 e4 c0 40 00 00:37:43.161 READ FPDMA QUEUED
60 08 80 00 62 64 40 00 00:37:43.161 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 00:37:43.147 FLUSH CACHE EXT
60 08 70 10 1f c0 40 00 00:37:43.105 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|