1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188 | smartctl 6.2 2013-07-26 r3841 [i686-linux-3.16.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3
Device Model: ST980811AS
Serial Number: 5LYBL20V
Firmware Version: 3.CDE
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Mon Mar 16 01:02:44 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 84) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always - 81076990
3 Spin_Up_Time 0x0003 099 099 085 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2090
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail Always - 90371840
9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15403
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1947
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1626
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2
190 Airflow_Temperature_Cel 0x0022 063 056 045 Old_age Always - 37 (Min/Max 35/38)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 325
193 Load_Cycle_Count 0x0032 009 009 000 Old_age Always - 183521
194 Temperature_Celsius 0x0022 037 044 000 Old_age Always - 37 (0 16 0 0 0)
195 Hardware_ECC_Recovered 0x001a 077 063 000 Old_age Always - 65754758
197 Current_Pending_Sector 0x0012 091 091 000 Old_age Always - 195
198 Offline_Uncorrectable 0x0010 091 091 000 Old_age Offline - 195
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1818 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1818 occurred at disk power-on lifetime: 15402 hours (641 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 11 30 d8 e4 Error: UNC at LBA = 0x04d83011 = 81276945
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 30 d8 e4 00 00:02:10.731 READ DMA
35 00 10 00 15 84 e0 00 00:02:10.723 WRITE DMA EXT
27 00 00 00 00 00 e0 00 00:02:10.723 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:10.708 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:08.433 SET FEATURES [Set transfer mode]
Error 1817 occurred at disk power-on lifetime: 15402 hours (641 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 11 30 d8 e4 Error: UNC at LBA = 0x04d83011 = 81276945
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 30 d8 e4 00 00:02:06.031 READ DMA
ca 00 08 f0 28 c7 e0 00 00:02:06.031 WRITE DMA
27 00 00 00 00 00 e0 00 00:02:06.018 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:06.018 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:08.433 SET FEATURES [Set transfer mode]
Error 1816 occurred at disk power-on lifetime: 15402 hours (641 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 11 30 d8 e4 Error: UNC at LBA = 0x04d83011 = 81276945
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 30 d8 e4 00 00:02:06.031 READ DMA
e7 00 00 ff 14 84 a0 00 00:02:06.031 FLUSH CACHE
ca 00 08 f8 14 84 e4 00 00:02:06.018 WRITE DMA
e7 00 00 f7 14 84 a0 00 00:02:06.018 FLUSH CACHE
ca 00 e0 18 14 84 e4 00 00:02:05.980 WRITE DMA
Error 1815 occurred at disk power-on lifetime: 15402 hours (641 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 11 30 d8 e4 Error: UNC at LBA = 0x04d83011 = 81276945
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 30 d8 e4 00 00:01:58.821 READ DMA
ca 00 b0 28 10 84 e4 00 00:02:03.461 WRITE DMA
27 00 00 00 00 00 e0 00 00:02:03.460 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:02:03.458 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:02:03.450 SET FEATURES [Set transfer mode]
Error 1814 occurred at disk power-on lifetime: 15402 hours (641 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 11 30 d8 e4 Error: UNC at LBA = 0x04d83011 = 81276945
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 10 30 d8 e4 00 00:01:58.821 READ DMA
ca 00 08 c8 28 c7 e0 00 00:01:58.810 WRITE DMA
27 00 00 00 00 00 e0 00 00:01:58.810 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:01:58.766 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:01:58.766 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|