1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194 | smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-38-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MK..52GSX
Device Model: TOSHIBA MK3252GSX
Serial Number: X8C2FBTGS
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 1.5 Gb/s
Local Time is: Mon Mar 2 22:13:23 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 17) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 135) minutes.
SCT capabilities: (0x0039) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1547
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 9237
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 7689
10 Spin_Retry_Count 0x0033 253 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5570
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 688
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 98
193 Load_Cycle_Count 0x0032 098 098 000 Old_age Always - 21907
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 59 (Min/Max 10/68)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 30
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 104
222 Loaded_Hours 0x0032 082 082 000 Old_age Always - 7519
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 332
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1402 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1402 occurred at disk power-on lifetime: 7689 hours (320 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 02 01 f4 dd 61 Error: WP at LBA = 0x01ddf401 = 31323137
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 08 40 dd 27 40 08 02:39:59.712 WRITE FPDMA QUEUED
60 08 00 00 f4 dd 40 08 02:39:59.712 READ FPDMA QUEUED
61 08 f0 d8 45 4e 40 08 02:39:59.712 WRITE FPDMA QUEUED
b0 d0 01 00 4f c2 00 00 02:39:59.635 SMART READ DATA
ea 00 00 00 00 00 a0 00 02:39:59.635 FLUSH CACHE EXT
Error 1401 occurred at disk power-on lifetime: 7689 hours (320 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 aa 01 f4 dd 61 Error: UNC at LBA = 0x01ddf401 = 31323137
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 a8 00 f4 dd 40 08 02:39:55.625 READ FPDMA QUEUED
ec 00 01 00 00 00 00 00 02:39:55.603 IDENTIFY DEVICE
61 28 88 b0 45 4e 40 08 02:39:55.602 WRITE FPDMA QUEUED
ec 00 01 00 00 00 00 00 02:39:55.602 IDENTIFY DEVICE
ef 10 02 00 00 00 a0 00 02:39:55.602 SET FEATURES [Enable SATA feature]
Error 1400 occurred at disk power-on lifetime: 7689 hours (320 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 52 01 f4 dd 61 Error: UNC at LBA = 0x01ddf401 = 31323137
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 50 00 f4 dd 40 08 02:39:51.546 READ FPDMA QUEUED
60 08 48 18 62 82 40 08 02:39:51.546 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 02:39:51.546 FLUSH CACHE EXT
ef 10 02 00 00 00 a0 00 02:39:51.546 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 02:39:51.546 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1399 occurred at disk power-on lifetime: 7689 hours (320 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 1a 01 f4 dd 61 Error: WP at LBA = 0x01ddf401 = 31323137
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 20 a8 45 4e 40 08 02:39:47.506 WRITE FPDMA QUEUED
60 08 18 00 f4 dd 40 08 02:39:47.502 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 02:39:47.501 FLUSH CACHE EXT
ef 10 02 00 00 00 a0 00 02:39:47.501 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 02:39:47.501 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 1398 occurred at disk power-on lifetime: 7689 hours (320 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 5a 01 f4 dd 61 Error: WP at LBA = 0x01ddf401 = 31323137
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 08 00 a0 45 4e 40 08 02:39:43.405 WRITE FPDMA QUEUED
61 08 f0 98 45 4e 40 08 02:39:43.405 WRITE FPDMA QUEUED
61 08 e8 90 45 4e 40 08 02:39:43.404 WRITE FPDMA QUEUED
61 08 e0 88 45 4e 40 08 02:39:43.404 WRITE FPDMA QUEUED
61 08 d8 80 45 4e 40 08 02:39:43.404 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Aborted by host 10% 7689 -
# 2 Short offline Completed without error 00% 7119 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|