1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193 | smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Black
Device Model: WDC WD2500BEKT-75A25T0
Serial Number: WD-WXB1A70N9756
LU WWN Device Id: 5 0014ee 25a2e4dfb
Firmware Version: 01.01A01
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Feb 13 02:05:29 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 4800) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 59) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 191
3 Spin_Up_Time 0x0027 142 138 021 Pre-fail Always - 1875
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1316
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 14811
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1305
191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 623
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 165
193 Load_Cycle_Count 0x0032 184 184 000 Old_age Always - 49771
194 Temperature_Celsius 0x0022 112 067 000 Old_age Always - 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 27
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
240 Head_Flying_Hours 0x0032 080 080 000 Old_age Always - 14800
241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 16384551547
242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 13384279466
254 Free_Fall_Sensor 0x0032 001 001 000 Old_age Always - 679
SMART Error Log Version: 1
ATA Error Count: 242 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 242 occurred at disk power-on lifetime: 14810 hours (617 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 f0 48 e9 45 ee Error: AMNF 240 sectors at LBA = 0x0e45e948 = 239462728
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 30 e9 45 ee 00 00:24:18.550 READ DMA
ef 10 02 00 00 00 a0 00 00:24:18.550 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 00:24:18.548 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:24:18.548 SET FEATURES [Set transfer mode]
Error 241 occurred at disk power-on lifetime: 14810 hours (617 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 f0 48 e9 45 ee Error: AMNF 240 sectors at LBA = 0x0e45e948 = 239462728
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 30 e9 45 ee 00 00:24:16.544 READ DMA
ef 10 02 00 00 00 a0 00 00:24:16.544 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 00:24:16.542 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:24:16.542 SET FEATURES [Set transfer mode]
Error 240 occurred at disk power-on lifetime: 14810 hours (617 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 f0 48 e9 45 ee Error: AMNF 240 sectors at LBA = 0x0e45e948 = 239462728
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 30 e9 45 ee 00 00:24:14.546 READ DMA
ef 10 02 00 00 00 a0 00 00:24:14.546 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 00:24:14.544 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:24:14.544 SET FEATURES [Set transfer mode]
Error 239 occurred at disk power-on lifetime: 14810 hours (617 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 f0 48 e9 45 ee Error: AMNF 240 sectors at LBA = 0x0e45e948 = 239462728
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 30 e9 45 ee 00 00:24:12.556 READ DMA
ef 10 02 00 00 00 a0 00 00:24:12.556 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 00:24:12.554 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:24:12.554 SET FEATURES [Set transfer mode]
Error 238 occurred at disk power-on lifetime: 14810 hours (617 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 f0 48 e9 45 ee Error: AMNF 240 sectors at LBA = 0x0e45e948 = 239462728
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f0 30 e9 45 ee 00 00:24:10.566 READ DMA
ef 10 02 00 00 00 a0 00 00:24:10.566 SET FEATURES [Enable SATA feature]
ec 00 00 00 00 00 a0 00 00:24:10.564 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 00 00:24:10.564 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 90% 14810 239462728
# 2 Short offline Completed without error 00% 1 -
# 3 Short offline Completed without error 00% 0 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
|